วีดีโอ

Hi 👋🏻 Thank you 😁 On some rings the finish was seperated from the Wood after a short time. On Others the Finish looks perfekt even after years. Its important to work really careful to get any dust or air between the coats. Also dont Sand the Ring too smooth so that the glue has a good grip. And maybe it depends on the Wood itself.

Hi 👋🏻 I never used this glue Its important to use high quality ca Thanks for your comment 😁

Thanks For your comment

Thanks For your comment 😉

Das freut mich 😁

Danke 😁

Depends on thickness of the layers. I don't spend much time on the Low and rough grits to not remove the glue. On the higher grits i sand between 30-60 sec. Hope this was helpful 😅 Thx for your comment 👋🏻

Good Question! I always had issues with that. I tried to put Tape between, but than the Ring got Stuck to the Tape 😅 Than i just put it on carefully. Maybe you can try to put some oil or wax on the dowel, but i never tried this Method 😂 Thanks for your comment 👋🏻

Im Glad U like it 😁

Hi 👋🏻 This was one of my First Rings that i Made and at this Point i didn't knew the Method with ca. But its much better than Just oil in my opinion and i Always use it as you can see in 'new' videos.

@@tworighthands ah yeah the date didn't show up for me for some reason..appreciate the response

That makes sense with the replaceable foot, if i do more stuff Like this in the future i will keep this in mind. Thanks for your comment 👋🏻

Thanks for your comment, yes you are right 😁

Thanks for your opinion 😁 I will considrer this next time i restore Something 😉

It's still holding after all the time. Would be better without the oil of course. It was normal ca-glue. Thx for your comment 😁👋🏽

@@tworighthands your great-grandfather would be proud! Nice job!

@@capers72424 thanks 😉

Yes 😁 I've got not many time since a few weeks but when I got more time in the future I will upload more Videos.

Thanks for your comment😉

Still he managed to make a wonderful job and at the end it was way better than before.

Hi, I never realy used this, it was more like an Experiment. Try it out and let me know 😉 Thx for your comment 👋🏽

Hi 👋🏽 In this Video ist used Medium ca glue and a plastic polished that i found on Amazon. Thx for your comment👋🏽

Hi 👋🏽 Forstner Bit depends on the finger diameter you want it to fit on. In the video it was about 21mm. And the hole saw needs to be 5mm larger in diameter than the forstner bit. Hope I could help😉 Thx for your comment.

Dankeschön 😁

I bought them on Amazon. They are called micro-mesh Pads. The Grits go from 1200 to 20000. Thanks for your comment 😉

Vielen dank für deinen support 😁

I never tried it but I think I will 😉 Thanks for your comment 😁

Of course its possible, with wood stain. But I Prefer the natural wood colour. Thx for your comment😁

Freut mich, dass es dir gefällt, hoffentlich kommt dann ein Video von dir damit ich dein Ergebnis sehen kann 😉

Thank you very much for your Motivation 😁

You are absolutely right 😁 Thanks for your comment

Danke 😁

I put on a ca-glue Finish at the end. Also have a video of the whole progress. Thanks for your comment 😁

Habe mir beide deiner Videos angeschaut und gesehen das du auch Deutsch sprichst. 😁 Sehr toll gemacht 👍🏻 Habe auch mal ein Abo da gelassen und würde mich über weitere Ring Videos freuen 😉.

Super, danke dir. Für's Lob und für's Abo. 😃

It is Ca- Glue. More about it in my video: How to put on ca-glue Finish. Thanks for your comment 😁

@@tworighthands Alright thank you, is the other stuff plastic polish, and if so what brand if u don't mind me asking? Im getting into rings myself and I've seen a few of ur vids so I appreciate it fr fr

@@heyitsslayer2584 I think every plastic polish would work, I bought mine on amazon. But I think there are better ones. I will also try another one next time. Im happy to hear that, much fun 😁 And always feel free to ask Questions.

@@tworighthands Alright thank you so much, I really appreciate it, keep up the great work!

Thank you very much for your comment 😁👍🏻

I did it with water. Thanks for your comment 👋🏽

Thanks for your comment 😁 Yes, safety is very important 👍🏻

The Brand was "Pro Loc" i bought it on amazon but can't find it anymore 😅. Thanks for your comment 😁

@@tworighthands Thank you so much, do you think other ca glues like Starbond will work? Also thanks again I appreciate you looking, I'll definitely subscribe right now!

Wow thank you very much 🤗. Its a well known brand, i would say it works. But im sure there are Videos about ca- finish and the brands aswell.

@@tworighthands Alright thank you so much! I've been looking at your content and thanks for the informative videos and keep up the great work!

Thanks for your comment 😁 I Prefer the original sounds 😉

I took less time with the lower grits to not take of the glue, and on the higher grits I took more time maybe a Minute (depending on the Ring). Thanks for your comment 😉

@@tworighthands thanks for the reply. Ring looks good!

Thanks 😁 Looking forward to See it 😉

You're welcome, thanks for your support 😁. Please contact me on this E-Mail: tworighthandsyt@gmail.com Im going to send you some ideas of how your Ring can look like and you can give me your Ring Size.

Thanks for your comment 😉 I bought my lathe for only $300 because it it enough for my use.