วีดีโอ

Per my previous comment. I was replacing an old block heater that leaked. I ended up taking a shaviv deburring tool around the lip to bevel it, then I took a flap wheel in my right angle drill to the port to clean it up. A bit of grease on the o ring and port and the block heater popped in and sealed.

I have a Cub Cadet 1782 diesel Super garden tractor with a D640 engine. It uses the same block heater and they are a pain to put in. I am replacing my old one now and came here hoping for a better idea while installing it.

I see inside can at the knocker wheel cover your missing the little metal cover that prevents the seed from getting under wheel knocker cover .

Kallstrom Sweet Corn , It's January 2nd and I'm rebuilding several John Deere 71 Flexi planters . If planter can are to rusty on the bottom you can cut bottoms off with chop saw or hand grinder and then fold metal over with a hammer . Works great .

Get a cab

Put grease on the pivot points

U gonna make clean my equipment up

I am missing something that must be obvious. Why do you need a hydraulic top link? Doesn't the up/down control on the BX23 raise and lower the box blade or whatever other attachment you have on the back just fine?

A couple questions... 1. Does it come with rear and forward facing rear blades? 2. Are the blade/s replaceable or welded on? Thanks for your help, i cant find this info anywhere online

That's corn head grease. 😂

Do you have a tutorial on how to remove the deck from the G1800? I can’t figure out how to detach the drive axle.

Be careful with heater element if installed facing up because it could be exposed to air in engine if water level is low, possibly burning out the element. As for the O ring, a small drop of dish soap makes a big difference when installing

I didnt catch it did you reuse the gasket?

So how did it come out, seed sprouting viability using the harrow?

12:30 looked like it pulled level. 🤷‍♀️ You might just be going too fast.drop a tire on it for weight

All that work and just laying it flat… 🚶🚪🦖

Holy monkeys dude. You got all the nuts off the spikes, that’s friggin amazing. I just want to tighten mine up and get the adjuster to work. That is way more work than I am going to do. I might try to tighten up some spike if they’re loose but I don’t expect any luck at being able to do all of them. Did you re die the threads and tap the nuts? Great googely moogely that’s a lot of work. 😆 I take it you don’t have a press to straighten that side bar. Nor torch to heat it up. I’d think putting it in something to hold it and a big ole cheater bar over the end and bending it back might do something using a hitch possibly 🤷‍♀️

Do you have to soak the corn seeds in water before you drop them in the ground or how long do you water after you have them planted.

Thanks for the video. I was on the fence about the Pat's system but I think that is the way to go. As has been said before, you have great helpers. You, Sir, are a really good dad.

It looks great

what toplink did you end up getting? does it hook to your front 3rd valve or do you need another valve out back?

I just bought the 2023 BX23s. I want to do this for my box scraper.

is there another place block hearter can be installed as my 722 faces the opposite of yours and no way to get a front frost plug?

Great Jobs!, i'm from Brazil, i have a Kubota B2320 and a John Deere planter 7000, and i love this. congratulations for your job.

When you lift an implement do you 3pt hitch arms angle in once there's weight on them? I just installed my pats and they seem to twist inwards (the whole arm) when lifting my blower.

Nice! Both look fun.

I have a hydraulic top link and I think it works great for all my rear attachments. Nice video.

Great video! Do you have a reference for the hydraulic top link you have installed here? I have a BX2380 and I’m trying to track down that part number, thanks!

Would you share the .dxf or drawings for the plates of steel?

Booooooooo 😆😆😆😆😆😆, That was funny

The 4 quick couplers are what style? Are the male quick couplers on the hose side ball or poppet style?

How’s this holding up overtime, Any leakage?

Have a 2017 battery on my G1800S and dying fast, could I use 425 CCA instead of 500 these things have gotten out of control in terms of cost? Talking $50 difference.

Buen trabajo. great job, nice single planter.

That is a good idea for an engine hoist. This looks like a really difficult job but I am sure you will not have a problem with it

Wow major Pain! Sorry to hear you have to deal with that 😢 Good Luck and I know your capable 👍😊

Omg hope it goes well 🤞🏻and welcome back Jason 👍🏻🙋🏼‍♂️🙂

Good Evening Sir, ( I'm So Sorry Sir 😢) Sir You ARE DOING OUTSTANDILING VERY WELL AND YOU HAVE MY FULL SUPPORT MAAAN 😇👍👌✨🚀💪 Keep Up Your Best Up Spirits Sir YOU ARE TRULY WINNING THIS ONE WITH FULL FLYING COLORS 💪👍👌😇✨🚀Cheers 🍻🍻

Oh no That sucks... the little shield Kubota provides is not adequate! Keep us posted as to how the job goes.

I have not had much battery problem with my g1800, i get around 4 years of shaking the battery, i rarely put any water in, guess i am lucky.

CAME OUT EXTRAORDINARY BEAUTIFUL. I have a queation: how did you remove the 2 outside pulleys is that the nut with the gease zerks i have to back off the take the pulley off. i need help seriously thanks

I dont understand how you greased the head gearbox. Didnt look like any bolts were removed when you did it. Doesnt look quite the same setup as an Echo.

You have to replace your spring washers! Bin dere, dun dat!!!

That is a perfect place to store the bucket, great job

Just picked up almost the same model, 4’x@67”, original paint was green. Saving this video. Thanks

Thank you for a great vidio. I've got a question that I hope doesn't get me ridiculed, Will raising the pressure effect the mower deck as far as the RPM of the blades??

What is the length of the hydraulic top link you got? and could you tell me where did you get it from? Link? thanks!