วีดีโอ

Thank you! But ???🤔

@@Hutch_Davenport Big Thanks Hutch for chiming in! I have a soldering magnifying glass that I use from time to time. It’s the only way I can work on these other than wearing my adjustable lens reading glasses LoL! When I can’t see the cars themselves, it’ll be all over!😝

260 motor

~8-10mph

Not sure on this one, haven’t had this one apart yet. Fun little Jeep tho. I’m betting a mix of both.

@@NoodlesNJ1 I totally agree with you on the links. Capturedwouldbe so much better. This is basically a brushless “2995”underneath anyway. Thanks for the cool comment and the view! ✌🏼👍🏻😎

Everything on my HB 1009 is still the way it came out of the box. I have used it about 6- 7 different off road adventures since this video was made. I have a bunch of other Rc’s that I like to rotate into use so they all get a turn to be used and played with. The HB has been truly awesome and tough and I have not broken anything or tightened anything on it except the wheels when the axle nuts get a bit loose. I have run it with my Redcat Gen 8 and my Rgt Rock cruiser, as well as my neighbor’s trx 4 and it can do equally what those trucks can do. I am truly impressed with it and very much recommend it whether upgrading it or keeping it stock. Hope I’ve helped making a choice! Thank you for your great comment and for watching Bang For YourBuck Rc reviews! ✌🏼😎👍🏻

@@BangForYourBuckRc I thank you for your quick reply. I guess, your great remarks on this "cheap" rc crawler is enough reaasurance for me to get it also. You see, as a newbie in rc my perception is you will only enjoy the hobby with those expensive models but apparently it's not all true. Congrats again for a wonderful channel.

@@allansoria3478 thanks again my friend. I’m sorry , when I read your initial comment I was at work and for some reason was giving you my feedback and impressions on a different rc from HB Toys the “Beluga”1/10 Bronco. I did not have my reading glasses on and thought that this was the rc you were asking about. I’m at home now a day later, glasses on (LoL!) and now can see your were referring to the smaller 1/12 HBToys ZP1009. Yes, this truck and its other body styled variants are very good out of the box, and a lot of fun and to be honest quite capable. Mine is still going strong, pretty much all stock. I did have to replace the servo on it almost immediately as I don’t believe they are fully waterproof. The first time I went through deep water I lost my steering. I purchased another servo for this and have avoided deep water. It does seem to be splashproof, but full on waterproof it is not. I also think the shocks that come on this are sprung way too hard. It’s a minor fix but one worth mentioning. This should (in my opinion) be set up with oil filled shocks, not the friction type they have it set up with. Putting oil filled shocks will make a huge difference. Make sure you measure the length of the stock ones so you get the right length. Other than those two things this thing is an absolute beast! Mine is still going strong and I haven’t had any other issues. I do plan on upgrading the esc to a proper hobby wing 1060. The stock set up has no drag brake, so going slowly down a steep incline can be sketchy. With a 1060, I will have drag brakes which is needed for proper crawling. When I do this swap I will need to get a new receiver and transmitter because the stock set up is bound to a 2 in 1 esc/ receiver set up. So those are my thoughts on this zp1009. I don’t recommend it if your paying much over $100. If you can get it at around +/- $100 it’s worth it, considering the minor upgrades it will at some point need. If very durable and fun even in stock form. If your really looking for something on another level though, HB toys make a true 1/10 Beluga (Ford Bronco Trx4 clone that is amazing out of the box. I’ll leave you the link to that truck. It’s worth the extra you will spend. I hope this helps you make your decision and hopefully not too late! Happy Rc’ing my friend! Just found this amazing item on AliExpress. Check it out! $210.75 | RC Crawler 1/10 Rc Car 4WD RTR HB R1001 with LED 2.4G Electric Remote Control Rock Buggy Off-road Vehicle Rc Cars for Adults a.aliexpress.com/_mNzyUFq Just found this amazing item on AliExpress. Check it out! $484.44 | 1/10 RC Car HB RTR R1011 Remote Control Vehicle 2.4G Full Proportional Rock Crawler LED Light 4WD Off-Road Climbing Truck Toys a.aliexpress.com/_mMzUrI0

@@BangForYourBuckRc Thanks again sir for spending some time to reply to me. Your remarks and suggestions will truly help me along my rc journey. Oh by the way, a just took the bait and got myself the HB ZP1007, the Toyota FJ Cruiser version of your truck. I got it really cheap in my country at around US$52 and made all the free mods to it and I'm happy. Now my new question to you sir is, can I use a 7.4V 25c 2S Lipo battery for the stock electronics on this truck. Will there be an issue using Lipo. By the way, I also know the "Beluga"' R1001 and actually tha's my next dream rc car. Currently , it's around US$175 here. Cheers.

@@allansoria3478 Glad to hear about that awesome deal on ZP FJ truck you purchased! That think must look awesome in person as did my ZP Ford F150 truck! Yes you can absolutely run a 7.4 lipo in this with no worries. You may have to find a lipo with the same dimensions as the li-ion they sent you. Also, battery terminal or lead placement should be considered as well to match your li-ion, the battery compartment is made for a lipo or li-ion with both leads only on one side of the battery pack. Other than that. You won’t have any issues. I’m very happy for you, knowing you’ll be having a great time with this rig. It’s a great place to start and you got one heck of a deal! 💯😁🎉🤘🏽

@@pyroextreme3744 it is a 🚀! 👍🏻😝

@@BangForYourBuckRc How much does it catch with the Stock battery and on high speed?

@@pyroextreme3744 it’s much more controllable with stock 2s battery and still capable of controllable wheelies! 👍🏻😝

Not sure what your asking, will be glad to help tho. 👍🏻

@@BangForYourBuckRc does this rc jeep brakes when you pull the trigger at highest speed forward and then suddenly pull the trigger at the reverse direction?

Yep, that’s right Eric, these can be found for as low as $56 and $90 depending where you look. No matter, you are 100% right,comparing this to a much more expensive Traxxas is a no Brainer. These well done somewhat clones of the Trx4m are just as good and you’ll save the green back for upgrading tire, wheels and shocks! Thanks for watching and leaving a great comment!👍🏻😎✌🏼

@@LukesVintageRC I really appreciate that my friend! Yes you are exactly right! Giving up something I love and put so my time and of myself into has been long contemplated at first not an easy thing to do. I felt it in my heart that he was requesting I do this . Not sure if I’ll be back , but if I do , it will be to bring glory to him in some way. Thanks for your awesome feedback buddy! God Bless!🙌🙏😎

@@MattysRCWorld thank you Matty! I very much appreciate you brother! Yes you would be correct on these two rc’s Being very similar. Awesome and fun Rc’s they are. Though I don’t feel they are made for hard core bashing , they still hold up well for bashing out in the woods,and around the house. I like these Rc’s very much!👍🏻👍🏻👍🏻😎

Dude, thank you for that awesome comment and also for you’re much appreciated sub! Happy you liked it.It’s a great truck!🔥💪🏽😎👍🏻

@@mark-mj5dl I think your correct on that reference. 050 and 180 size motors are very close in size physically! On this truck there are no markings on the motor referencing it’s size. Thanks for the correction my friend!

@@CarmineRC Thanks for your awesome and kind words Carmine. Yeah I really love this truck, the throttle modulation is not the very best , but is very good. Good enough for me right now. I do at some point plan on putting a HW Fuzion set up in it. My neighbor has a TRX -4 and this Is very much like it in many ways and is just as durable. It doesn’t have the ability to unlock the diffs, but it does have 2 speeds and great brakes! It’s also very comparable performance wise to the Gen 8. For the money this costs one can’t go wrong! It really great to hear from you brother! God Bless!

@BangForYourBuckRc That's awesome, Robby! Maybe you can find some used TRX-4 axles? 🤔 And good enough for YOU is good enough! If anything, I'd upgrade the servo... But the HW Fusion is a mind-blowing option! I'm dying to get my first one.... but for my Smokey and the Bandit Semi Truck! If anything needs more torque and low speed resolution.... it's the Tamiya Semi Trucks. Especially because my Grandbabies want to ride on the trailer! And somehow, I'm going to try to make that happen. That one I have to accomplish. Already figured out that the 1200kv version would be perfect. Because a $2200 RC Semi Truck, should never be driven fast. I have been working on Smokey again! There will be videos soon. I just need some small things.... And eventually, a Hobbywing Fusion. THAT one will take a miracle. 🙏 I may be out of those. Although, it wouldn't be right to Pray for a toy. That Semi Truck, it's advanced electronics, wild array of LEDs and unbelievable sound unit... was the only significant thing I got myself out of my Inheritance. Before my so-called friends and my morally corrupt stepkids, rifled through a large chunk, without me knowing until it was too late. Oh, and I bought my wife a $48,000 car..... which when she left me, she TOOK. Brother, I'm trying so hard not to be bitter. It's not healthy, and I'm the one who failed. Strongest lesson I've ever learned! My self penance is to be honest to a fault.

@@CarmineRC BiG THANKS my friend! Haha, my course has been work in progress. It’s bigger now than in this video. Not to bad for using just scrap material I had laying around the homestead. I have now added more boulders I picked up of Marketplace for free, a couple chicken wire crossings, and a garden cart hill climb. Just received more material for free from my buddy Gabe who also has a YT channel called -Make Stuff Better- ( check him out when you get a moment!), but yeah it’s coming along,and even though I am taking a long break from youtube,I am still enjoying the Rc’s! I really love this car featured in this video from WLTOYS. It’s got a fully locked rear end w/ 2 spds. And 4wd !It’s a great trail basher! Your definitely right about getting more ground clearance with this. If got longer travel shocks and some 1.9’sready to go on this at any time. Just haven’t had the time lately! Thank you so much for you generous offer on those tires. Keep them for one of your amazing projects Dude! Thanks again buddy and Blessing to you Carmine dude!✌🏼😎

@BangForYourBuckRc Robby, I'll leave the tire option open.... but yeah, 100mm Shocks should be capable. To the point that it could handle nearly as well as my Wraith.... Which BTW, has Redcat Gen 8 shocks. 😲 They're actually smoother than most premium shocks! And in 7 years, I've only had to top up ONE shock, once! The real key to that is, I replaced the factory O-rings with Team Associated X-Rings. They're THAT good. And, remember the golden RC damper rule.... Short shocks (like on-road cars, drift cars), use thick oil (50 to 120wt). Long shocks use thinner oil (15 to 40wt). It may seem counterintuitive...... but, a very short shock barely moves its piston up and down. With a thin oil, you'd have NO damping whatsoever! And with a long crawler shock, the piston obviously moves much faster and longer. A really thick oil will almost prevent the piston from moving! 25wt should give you a surprisingly smooth ride, and have no trouble extending fully.... and have a nice, soft rebound. Oh, and you can buy the Gen 8 shocks, used off of Evilbay. Sometimes for less than $25! For the set!

Those are all channel functions to their perspective number. If you wanted to switch things around, you would be able to do so by changing these dip switches. (I just leave them alone)

@@eliflynn7282 use stock gearing with 2995 tires/wheels. Should hold good! 😝

@BangForYourBuckRc using stock gearing. Have rcawd tires. Still strips out the pinion gear even with stock motor. I have a 2845 , 3400kv motor, stripped it, used the stock 2000kv motor, same. Used a ridiculous 5900kv motor and i can't even full throttle so that was funny, but.. same.. can't find a good pinion gear.

Really appreciate that my friend! You can’t go wrong with these trucks as they are very impressive performers. They could charge any price under $130 dollars for it and I would still say this. Really hope you’ll be liking yours. You’re pretty close on the accent, I’m two states up in Maine. It’s a hard accent to hide isn’t it?😂 Thanks again for your kind comment!

Thank for watching and the positive feedback man! The 8560 has been awesome and blows me away at how good it is for so little money! Have a great weekend !😎👍🏻

Thank you! Cheers!

@@BangForYourBuckRc welcome brother

Thank very much for the awesome comment my friend!! Very happy you liked it!

Thanks dude, it’s still a great little car for me! 👍🏻😁

@@BangForYourBuckRc welcome my brother

Good morning Jose! Thanks for the great comment. Wish I had better news as far as parts go. These are pretty cheap so maybe buying two of these might be warranted. One to use , and of course one for parts.I have been using the metal dog bones from WLtoys buggy a959 and they work very well. I had one of the originals strip out on me just a while back. I love this little truck though. I do recommend reinforcing the inside of the body shell with gorilla tape or something comparable. Hope you continue to have fun with it. If I locate parts for this I will post a video! 👊🏼😁

These rc trucks on Amazon also shares all the same parts as the Guardian only body shells differ!👍🏻

a.co/d/fjEdjrG

a.co/d/aAcPSop

I know, very aggravating too! I’ve have been using wltoys 1:10 parts to repair mine. Some things fit perfect and other things slightly modified. Look up WLtoys 104001 parts

@@BangForYourBuckRc i bought one from amazon and it came brushless, stripped a diff planetary gear on 3s almost instantly, but i got it with amazon's Vine program, so i can probably message the seller for a new part or new car, but do you think the differential from the wltoys 104001 will work in this car? they look similar

Thank you for this Larry! Hope you had a blessed Father’s Day brother. All Glory and praise is Christ’s, Amen 🙏! Peace and blessings to you my friend!

Thanks buddy! It’s quite fun too!

Your very welcome friend! ✌🏼😎

The 3s lipo I used in this video was a Ting Ling 45c lipo. Awesome and inexpensive battery available on Amazon. Not sure if it’s still available there or rebadged under a new label. Thanks again for the feedback!

@@BangForYourBuckRc awesome, thanks! Don’t this they make them anymore, I’m going to diy something up.

@@magnusstone running a 2s hi capacity lipo is almost as good as 3s and easier to drive without flipping it over. It will still do endless wheelies though.😂 When I take this truck out to bash I normally run a 2s 60-100c and it’s still an animal! 🙌⚡️💪🏽😂

Thanks dude!😎👍🏻

Yes in due time it would with out any care. I clean and oil my cars pretty thoroughly after though and run them pretty regularly. Thank you so much for the comment my friend! 👍🏻😎

Thank you Robert brother. I love you too man! I’m very glad to have gotten to meet you as well brother! I really appreciate your very kind sentiments too.I will probably be back in time, but in a more fun and light hearted way. Right now I am enjoying sitting on the sidelines and watching when I can. No pressure, no feeling of obligation. I definitely feel like I was giving too much of myself to my TH-cam Family and not enough to God or my family and family duties. Something felt off. I still am enjoying this awesome hobby , only without the pressure of a camera and hours of editing following after. It’s just nice to have control of my schedule again. Before I do return , I’ve got to figure out a balance I am pleased with. In the mean time,expect me to be active on the sidelines as a part timer, still supporting my dear friends when time allows. Hope all is well my friend and God bless you Robert!

@@BangForYourBuckRc you're doing exactly what you should be brother. God and family first. You can always pop on occasionally when the time is right, without pressure or obligation if you feel like it. Any way around, I'm here for you and please stay in touch!

$8!!! You’d a man! That’s awesome Dude!💯👍🏻😎

Thank you my friend!

Thanks MR.Panda Sir! I do most honorably thank you. It was a fun video to make! 💪🏽😃✌🏼

You're welcome my Good Friend ❤! Have a Awesome weekend ❤

????

When I purchased this it was under $150 off from Amazon with the use of an Amazon coupon. Great car for the money and great service as have spare part availability which came rather quickly after ordering through Haiboxing. Parts are now also available on Amazon as well! Thanks for the view and question! 👍🏻😎✌🏼

Sorry you feel that way bro. Some people like it,few don’t. According to YT stats,background music has helped viewer retention. Still, can’t satisfy everyone! Thanks for the feedback!👍🏻😎✌🏼

Thank you so much for the kind words my friend! God Bless and thank for your insight and all your amazing videos!👍🏻❤️💪🏽😎

Thank you so much for taking the time to leave such an awesome comment.I really do appreciate your excitement about these shows! What an amazing experience for your Mom to have met the A*team. I for one loved that series as well! Are your labs chocolate and yellow? Chocolate being Luke and yellow being Bo… still cool names nonetheless! I do have a Dixie horn for this car , but it only works some of the time. It wasn’t on in this video. Really happy you enjoyed and good luck with your build of the General Lee! 👍🏻 Have a blessed Memorial Day weekend!✌🏼😎

@@BangForYourBuckRc The yellow Lab is Luke and our black Lab is Beau. We also met all 3 Dukes at the same convention. Thanks for the luck and have a great memorial weekend too!

Thanks dude!

I most definitely appreciate that Arty! Your channel is great, and if it leads to self satisfaction in the end than what more can we ask for right? I just let youtube consume too much of me and my time. I did feel the moral thing to do when other channels supported me was to in turn pay respect and support them as well. Of course, if one thinks this way, it will become difficult and wearing to keep all these obligations. This part consumed me and all of my spare time. Not sure I could have a youtube channel any other way, so something had to give. It was a blessing and a curse at the same time. Thanks so much for hanging in there with me though. I still Rc just the same but without the pressure of video, editing and all the other jazz. Hit me up if you still wanna go for a crawl. Will definitely stay in touch on your channel from time to time. I’m thankful to be considered your friend!

Can I make a suggestion just enjoy the car and make a running video. No pressure, I often barely edit. No time too. Run my business, get my kids to everything, with wife working, but when I get a few min I do my rcing that I love, and share like this…..no time to make RC friends to really play with, that takes lots of extra time. But ten min with phone and a car and I love it….hard for me to just drive w out filming….but no time to create high production quatstuff I’ve tried a little some performance upgrade reviews….thats like a job. And I have one idk how some dudes can swing it all…. Please stay in touch. I’ve known you weren’t into it since you took a break you’ve put good stuff out since but kept expecting this. Hope to see content and you in person some day!!!

Thank YOU!👍🏻😃