GassedGarage
GassedGarage
  • 18
  • 73 519
Fiesta mk6 1.6 tdci 16v GTD1244vz straight pipe RAW
Fiesta mk6 1.6 tdci hdi 16v
Gtd1244vz
Straight pipe
Focus RS intercooler
Last dyno was 169.7hp without the RS intercooler
มุมมอง: 2 068

วีดีโอ

Fiesta mk6 zetec S 1.6 tdci 170BHP 1.8 BAR BOOST # PART 2
มุมมอง 26K4 ปีที่แล้ว
STILL WITH SLIPPING KEVLAR CLUTCH Specs: AP coilovers GTD1244vz turbo @ 1.8 bar Pipercross induction kit Oil catch tank 110hp injectors (297's) Drive torque stage 2 kevlar clutch Scorpion downpipe/decat 3.1 bar map sensor EGR blank/delete MTC de-resonator pipe Standard(!) intercooler Mapped by HDI tuning UK
Fiesta mk6 1.3i | Backroad drive |
มุมมอง 5464 ปีที่แล้ว
An old video from when i was testing the gopro in the 1.3
Fiesta mk6 zetec S 1.6 tdci 170BHP 1.8 BAR BOOST
มุมมอง 23K4 ปีที่แล้ว
Small montage of my fiesta mk6 1.6 tdci zetec S running 169.7bhp and 312nm. Specs: AP coilovers GTD1244vz turbo @ 1.8 bar Pipercross induction kit Oil catch tank 110hp injectors (297's) Drive torque stage 2 kevlar clutch Scorpion downpipe/decat 3.1 bar map sensor EGR blank/delete MTC de-resonator pipe Standard(!) intercooler Mapped by HDI tuning UK
Escort mk4 VAN 1.3 | SOUNDCHECK |
มุมมอง 2164 ปีที่แล้ว
Soundcheck of my mk4 escort van Its got a peco backbox More vids to come (a lot more)
Escort mk4 VAN 1.3 | COLD START |
มุมมอง 3674 ปีที่แล้ว
Cold start of my van after standing outside for a couple of days
Fiesta mk6 1.6tdci 0-100 | 125Bhp 280nm
มุมมอง 6K5 ปีที่แล้ว
Tuned fiesta mk6.5 1.6 tdci 0-100km/h / 0-62mph Car mods: Stage 2 kevlar clutch Oil catch tank Scorpion downpipe Pipercross induction kit AP coilovers Remap stage 1 by HDI tuning UK.
Fiesta ST150 drive by
มุมมอง 1385 ปีที่แล้ว
Car mods: Graham goode racing induction kit Miltek 4-1 exhaust manifold Magnecor 8.5 ignition leads AP coilovers OMP strutbrace Roose motorsport coolant hoses TRC difusser TRC splitter
Fiesta mk6 1.6 tdci 0-100
มุมมอง 5035 ปีที่แล้ว
Fiesta mk6.5 1.6 tdci zetec s 0-100
Fiesta rs turbo drive by
มุมมอง 2195 ปีที่แล้ว
Fiesta rs turbo 1.6 cvh efi
Fiesta mk6 1.6 tdci boost gauge compilation (turbosmart)
มุมมอง 1.1K5 ปีที่แล้ว
Just a couple of clips from my turbosmart boost gauge.
Fiesta mk6 1.3 70hp 0-100
มุมมอง 3.5K5 ปีที่แล้ว
Fiesta mk6 1.3 70hp 0-100
Pitsterpro 160cc crash/fail
มุมมอง 1235 ปีที่แล้ว
Old video from 2016
Fiesta mk6 1.6 tdci vs audi a3 8p 1.6 tdi
มุมมอง 2485 ปีที่แล้ว
20km/h rolling start - Audi a3 8p 1.6tdi 105hp (stock) - Fiesta mk6.5 1.6tdci 90hp (scorpion downpipe/decat)
Fiesta mk6 1.6 tdci vs audi a3 8p 1.6 tdi
มุมมอง 4455 ปีที่แล้ว
20km/h rolling start - Audi a3 8p 1.6tdi 105hp (stock) - Fiesta mk6.5 1.6tdci 90hp (scorpion downpipe/decat)
Fiesta ST150 0-100
มุมมอง 6995 ปีที่แล้ว
Fiesta ST150 0-100
Ford sierra 2.0 DOHC wheelspin
มุมมอง 1745 ปีที่แล้ว
Ford sierra 2.0 DOHC wheelspin
Fiesta mk6 1.3 70hp remap/chip TOP SPEED
มุมมอง 9K5 ปีที่แล้ว
Fiesta mk6 1.3 70hp remap/chip TOP SPEED

ความคิดเห็น

  • @Feinstaubrakete.
    @Feinstaubrakete. 5 หลายเดือนก่อน

    I drive with 2,3 bar boost

  • @jannisbareis
    @jannisbareis 9 หลายเดือนก่อน

    My 1.6 tdci became a stage 1 from 109 hp to 150hp it works pretty good no problems and its much faster then stock round about 7,5 sec 0-100 and it only use 4,7-5,0 liter/100km

  • @vasylbodnar7199
    @vasylbodnar7199 10 หลายเดือนก่อน

    👎👎👎

  • @Troya19
    @Troya19 11 หลายเดือนก่อน

    Das hier ist fiesta mk5

  • @gabrielv.4358
    @gabrielv.4358 ปีที่แล้ว

    Nice!

  • @James-se2di
    @James-se2di ปีที่แล้ว

    How did you get the time to show up constantly?

  • @logenstlogensta1151
    @logenstlogensta1151 ปีที่แล้ว

    Salut est-ce vous avez un instagrame ou Facebook pour vous contacter

  • @nicolastelmar6383
    @nicolastelmar6383 2 ปีที่แล้ว

    hello who did the mapping?

  • @s20091504
    @s20091504 2 ปีที่แล้ว

    How do u pass MOT with blank/delete EGR ?

  • @-asn3174
    @-asn3174 2 ปีที่แล้ว

    where did u get the turbo gauge mount for the grille?

  • @estrophy
    @estrophy 2 ปีที่แล้ว

    Grat! Love them.

  • @afscrandan3114
    @afscrandan3114 2 ปีที่แล้ว

    Stupid question, whats the fuel mileage like?😂

    • @partyboy8071
      @partyboy8071 2 ปีที่แล้ว

      5L/100km if driving normal, fast driving was 8L/100km

  • @gimble8638
    @gimble8638 3 ปีที่แล้ว

    1.8 bar is just tiny bit over standard, i think they run 1.6bar anyway and the 1.8 and 2.9tdci's are both way over 2 bar!!!! again thats without being touched, your tune/bhp and MOST IMPORTANTLY torque figures is the important measure not that psml, so what s the torque??? your obv a whipersnaper, but you'll learn ;P

    • @gassedgarage3860
      @gassedgarage3860 3 ปีที่แล้ว

      Completely standard they run 1.0 bar, stage 1 they are around 1.3 bar. The engine which comes with the gtd1244vz runs 1.75 bar standard though

  • @joxcte2514
    @joxcte2514 3 ปีที่แล้ว

    Were to buy sensor map 3,1 bar pls

  • @jamessullivan8250
    @jamessullivan8250 3 ปีที่แล้ว

    Alright mate do you have instagram or Facebook?

  • @danielemurru1383
    @danielemurru1383 3 ปีที่แล้ว

    Hey! i'm planning to get the same car! Can we get in contact via Facebook?

  • @jaysweeney1427
    @jaysweeney1427 3 ปีที่แล้ว

    Was the turbo a straight fit

  • @edups3307
    @edups3307 3 ปีที่แล้ว

    I'd love to get more info on that 3bar map sensor. Also what about the injectors? I have the 90hp ones, the 239s. What's the actual difference in them because both can do at least 75mg? Also 1.8 bars meaning you have in total a 2.8 on the manifold, is it holding good?

  • @modellbahnco.2709
    @modellbahnco.2709 3 ปีที่แล้ว

    Which company did the remap? Have you got any engine problems until now?

  • @Mr330d
    @Mr330d 3 ปีที่แล้ว

    Did you like the Hdi tuning remap?

  • @theboosted2jz699
    @theboosted2jz699 3 ปีที่แล้ว

    Where can i find a genuine GTD1244VZ turbo, from hdi tuning its out of stock. And is it a hassle to install?

    • @geraldhutten8927
      @geraldhutten8927 3 ปีที่แล้ว

      The gtd1244vz turbo use part number 9804119380 its the one from a 1.6 bleu hdi 120ps. The hybrid you need to change the wheel to a 49mm .

  • @theboosted2jz699
    @theboosted2jz699 3 ปีที่แล้ว

    Hi mate, awesome car there really fast and the power is usable. Would you mind if I contact you somewhere as i’m trying to do a similar build and want some info

  • @hoodnut197
    @hoodnut197 3 ปีที่แล้ว

    No smoke no poke.

  • @ym-imyloi981
    @ym-imyloi981 3 ปีที่แล้ว

    Where did you get the 3.1 bar map sensor mate

  • @garethwatson9553
    @garethwatson9553 3 ปีที่แล้ว

    What did you do to get the turbo to fit ie pipe work anything else?

    • @Mr330d
      @Mr330d 2 ปีที่แล้ว

      Nothing straight bolt on you can use original pipe work

  • @lukastyn
    @lukastyn 4 ปีที่แล้ว

    What catch can are you using?

  • @mrdevan137UPDATES
    @mrdevan137UPDATES 4 ปีที่แล้ว

    I'm pretty much going for the exact setup as you with the rs intercooler included but how exactly does a kess unit work so I can get hdi to send me a map instead of sending my ecu to them?

  • @lukastyn
    @lukastyn 4 ปีที่แล้ว

    Mapped by Hdi tuning?

  • @jhautomotive
    @jhautomotive 4 ปีที่แล้ว

    👌🏼👌🏼

  • @mrkane1897
    @mrkane1897 4 ปีที่แล้ว

    wow 169.7bhp on standard GTD1244vz not hybrid? thats awesome results

  • @DaniAlvarezRey
    @DaniAlvarezRey 4 ปีที่แล้ว

    Hello friend, how did you do to control the electronics of the turbo gtd? because as standard it is controlled by an electrovalve and the gtd has a connector with 3 cables. Thank you.

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Contact HDI tuning UK for software, he can set up the VNT perfect. The 3 pin connector is not used.

  • @richardmaddocks9058
    @richardmaddocks9058 4 ปีที่แล้ว

    Why does it only rev to 4000 rpm???

    • @tylerhr2663
      @tylerhr2663 4 ปีที่แล้ว

      Rev limiter

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      it revs to 5200

    • @cloroxbleach608
      @cloroxbleach608 4 ปีที่แล้ว

      Because its a diesel and diesels don't rev as high as petrol engines

    • @richardmaddocks9058
      @richardmaddocks9058 4 ปีที่แล้ว

      @@cloroxbleach608 I know they rev to 5200 but he just not pulling it cause mine goes to 5200. Ps petrol cars go to 7 8 or 9k

  • @rickycolley1268
    @rickycolley1268 4 ปีที่แล้ว

    What clutche you using

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Stage 2 kevlar. But its slipping. Ive got a paddle clutch going in next week

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 Let me know how you get on with the paddle clutch if you get the one from HDI, I find it feels like the clutch needs bleeding although i have done it 5+ times (very light) and a high biting point too

  • @fpmclovin2014
    @fpmclovin2014 4 ปีที่แล้ว

    Is this on stock turbo ? And stock internals how can you push so much extra power ?

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Stock internals. Gtd1244vz turbo

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      stock internals can handle up to around 230 i think

    • @RGD-Audio-Repairs
      @RGD-Audio-Repairs 4 ปีที่แล้ว

      @@mrkane1897 Someone has 327bhp on stock internals, on their 1.6 tdci... and 402bhp forged...

    • @lukastyn
      @lukastyn 4 ปีที่แล้ว

      @@RGD-Audio-Repairs where can I find this?

    • @Allanpug
      @Allanpug 10 หลายเดือนก่อน

      ​@@RGD-Audio-Repairscan I get some info on this too please?

  • @mrkane1897
    @mrkane1897 4 ปีที่แล้ว

    should be sending my ecu off to them tomorrow cant wait to get it back,

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Congrats 👍 you will be amazed

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 just had it friday, had her up and running today, wow totally different car, havent even took it over 2200k rpms cause need time to bed everything in as ive had engine down to bare block but can tell its a huge difference got so much more turbo noise now from the GTD1244vz hybrid. will have to get some miles done in it over the next few days 👌🏼

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      @@mrkane1897 you got the hybrid mate? The turbo sound with mine is very good to, its insane 😂

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 yes hybrid GTD1244vz its sound is insane over stock noise, im even tempted to drive over to him after we are allowed to travel again and get him to do a live mapping on it, hes done great on mine and has talked me through a fair bit couldnt fault it.

    • @NicuDP
      @NicuDP 3 ปีที่แล้ว

      @@mrkane1897 can you please leave me a link with a video of your turbo? Interested to see it, how it sounds like, how the car behaves and so on. Please.

  • @unknown-hl4bj
    @unknown-hl4bj 4 ปีที่แล้ว

    Why is there no smoke? I mean, my standard 1.6TDCI with 90 horses leaves some puffs of black smoke lol

    • @thomasashman8738
      @thomasashman8738 4 ปีที่แล้ว

      I don’t think that’s good mate, my 1.6tdci fiesta used to throw out black smoke until I figure out that a boost pipe was split before the intake, replaced the pipe and not only went better but no more black smoke

    • @adampalmer6732
      @adampalmer6732 4 ปีที่แล้ว

      No smoke is good he can up power by adding more fuel air etc

    • @oluskloc
      @oluskloc 3 ปีที่แล้ว

      Diesel smoke when mixture is too rich. Here we have big turbo providing good amount of boost so with correct fueling that's perfect. If your car smoke it means not enough boost (boost leaks, worn out turbo, wrong sensors, bad egr or too much carbon buildup in intake), leaking injectors or too rich engine fuel map

    • @unknown-hl4bj
      @unknown-hl4bj 3 ปีที่แล้ว

      @@oluskloc I'm 100% I had no boost leaks (turbo made 1.1 - 1.2bar in load). I've changed injectors sealings (they were leaking before - still smoking tho). My car has 290.000km right now, turbo has been changed at 230.000km. I'm using high quality engine oil and filters (LM Special Tec F, Ravenol FDS USVO and now Polytron which is my opinion is by far the best). I've tried to unplug the EGR connector - the car is smoking almost the same, but it has a better pedal response. I've done a remap to ~120bhp, not tested yet. It smokes the same as standard (sometimes I see no smoke, sometimes I see alot of smoke). Can you recommend me what to do next? I just want to have a "clean" car that doesn't smoke as hell.. I mean, no smoke means a healty engine..

    • @oluskloc
      @oluskloc 3 ปีที่แล้ว

      @@unknown-hl4bjreplacing injectors sealings doesn't mean that your injectors doesn't leak or spray bad. On a budget side try to do some Liquy Moly diesel injector cleaning (not put to fuel tank just do as instructions on TH-cam), remove, clean and blank EGR for testing (cleaning might help but even that or as you tried unplugged one can stuck open some time under full throttle causing smoking). You can then leave egr blanked (it's just for emmisions) or replace it if it's the reason. You can do injectors leak off test and clean (or unplug for testing) MAF sensor). Check for boost leaking again because that's main reason of smoking even if everything is new. Unfortunately repairing diesel cars could be expensive but this you can try fairly easy and cheap. Also cleaning intake manifold can help but usually that's not main reason of smoke.

  • @gox310
    @gox310 4 ปีที่แล้ว

    Nice! Finally some video with this setup! Would you like to take 30-70 run? Or 30-90😁

    • @gox310
      @gox310 4 ปีที่แล้ว

      *Mph or 50-150km/h😄😄😄

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      After MOT in a few months i'll do it

  • @mrkane1897
    @mrkane1897 4 ปีที่แล้ว

    how come you used 279 injectors over 297s?

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      279 over 297? :p

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 your description states you used 279 injectors, ive not heard of people using the 279's before, only seen 0445110297's being used

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      @@mrkane1897 My bad, i'm using 297. There are no 279. Good spot lol

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 i did wonder as the only 279 injectors i can find are hyundai 😂

    • @_R_CADDY
      @_R_CADDY 4 ปีที่แล้ว

      GassedGarage Steve set you up without MAF?

  • @Kevin220494
    @Kevin220494 4 ปีที่แล้ว

    Turbo stock or hybrid?

  • @damianursusc362
    @damianursusc362 4 ปีที่แล้ว

    Nice

  • @damianursusc362
    @damianursusc362 4 ปีที่แล้ว

    0-100 6.5s?

  • @renaudlouis5820
    @renaudlouis5820 4 ปีที่แล้ว

    What type of remap ? Chip Box or reprogramming ?

  • @jakktor-automotivecontent194
    @jakktor-automotivecontent194 4 ปีที่แล้ว

    oiiii m8

  • @STFOOTY
    @STFOOTY 4 ปีที่แล้ว

    Hey, where did you connect the boost pipe from the boost gauge??

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      ive adapt it into one of the boost hoses

  • @robduggan9854
    @robduggan9854 4 ปีที่แล้ว

    Hi there, love the car! Did you buy a generic kess to do the mapping or a genuine unit? Also, is the gt12 able for 1.8 bar of boost? It must be if hdi tuning were happy to set it there. I have a volvo s40 myself with the 1.6 and it could do with a new turbo so I'd be interested in fitting the gt12 and getting hdi to map it if it was reliable.

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      It runs 1.7-1.8 bar stable. And its very reliable, hdi tuning really knows his stuff mate. And its a cheap kess clone of eBay, was about 55€.. 😂

    • @robduggan9854
      @robduggan9854 4 ปีที่แล้ว

      @@gassedgarage3860 cheers for the reply mate👍 they're a very underrated engine in my opinion. And that's a standard gt12 from an 8 valve 1.6? Not hybrid or anything.. I can't wait to see more videos once you've the clutch replaced!

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      @@robduggan9854 Yeah standard gtd1244vz from 1.5 tdci 8v. Yes these engines are really good. 😁 Paddle clutch is being shipped tomorow, be sure to check my channel for new vids

  • @Albe983
    @Albe983 4 ปีที่แล้ว

    Next video a 0-210 pull 😁😁..nice one 👍

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Clutch is slipping at the moment, ive ordered a paddle clutch. When that arrives i will do some new vids, the intake is also changed now.

    • @Albe983
      @Albe983 4 ปีที่แล้ว

      @@gassedgarage3860 👍👍..i wait 😁..i saw your dyno sheet on fb group 1.6 hdi and tdci owners

  • @mrkane1897
    @mrkane1897 4 ปีที่แล้ว

    finaly a video of this setup in action, i will be getting mine done by HDI over the next couple months, just bought my GTD1244VZ hybrid from them, they have been absolutely awesome with helping to find parts.

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      This is a standard turbo mate.😅 Yeah Steven is a top guy, really helpfull and knows his stuff. Cant recommend him enough. I recon the hybrid unit will go like stink tho, as my setup shreds tires in 2nd and 3rd gear in the dry like its nothing. 😂 If you want i can make more vids of my car, my clutch is slipping as soon as i put it in 3rd, as you can see in the 0-100 but ill make some vids if you want mate

    • @mrkane1897
      @mrkane1897 4 ปีที่แล้ว

      @@gassedgarage3860 yeah that would be great mate ill be getting paddle clutch from him too, cant wait

    • @adamg8554
      @adamg8554 4 ปีที่แล้ว

      @@mrkane1897 where abouts you getting the paddle clutch from mate? Mine with the gtd setup is 290nm but I have a map for 330nm from hdi that I badly want to put on

  • @CraziiTomm
    @CraziiTomm 4 ปีที่แล้ว

    Please do some more videos on the progress! Maybe some 0-100/ pull videos of acceleration

    • @gassedgarage3860
      @gassedgarage3860 4 ปีที่แล้ว

      Clutch is slipping at the moment, first i need to put a paddle clutch in. Make sure you subscribe, as i'll make more content in a few weeks/months. Cheers

  • @oscarwilson5207
    @oscarwilson5207 4 ปีที่แล้ว

    Is it hybrid or standard unit

  • @jordandonaldson154
    @jordandonaldson154 4 ปีที่แล้ว

    How did you fit this