วีดีโอ

Yes, I did rotate them according to Tesla's recommended pattern: Fronts to the rear, then cross the rears to the opposite sides in front. These tires aren't directional, and they're not staggared. Thanks for watching.

Yes! You are right! I had actually done this with the old toner box last time I got the message. Cleaning the contacts didn't help, so I had just removed the old toner (and recycled it). This time I decided to just buy this alternative to the OEM because it was so much cheaper (and cleaner). Great suggestion.

Mine sound surprisingly good. I mostly use them for flights. I accidentally left them behind on a trip earlier this year and was forced to buy a replacement pair at the airport (for some reason I have to have ANC in order to hear in flight entertainment). The new ones (SkullCandy Hesh ANC) were not nearly as good at noise cancellation and I gave them to my son as soon as I got home. I REALLY missed these guys. I've got a new trip coming up next week, so I'll be using these again several times over the next few weeks. I'll report back if I notice any degradation.

My pleasure! hope it helped :)

Yup, I had a 50-50 chance and completely blew it, lol.

it's about a quart.

Couldn't agree more! I had a couple of Cuisinart Grind n Brew models and I liked them, but they didn't have nearly the versatility this one does. It's a keeper.

Yeah, I'm always surprised by the number of cables and chargers that don't actually perform to their specs. I have a video coming where I try a 140w power supply and (spoiler) it doesn't put out more than 96w... even one of the two cables it comes with only works up to 96w (the other _can_ hit 140w if used with another charger though).

My juction box had wiring that was really close together and that was skewing the results unless I turned up (or down) the sensitivity. You can actually see me adjusting it with my thumb in the video. It turns out that that panel was depricated (and apparently has been since around the time it was installed in the 70s. We actually replaced the panel with a brand new panel so that we could install an EV charger on a 60amp circut, and the new panel is dead on.

It came from amazon. It's still going strong, so I'm pleased with it. Here is the link from the description. If you're not in the US, it might not work, but if you let me know I can find a link from the same manufacturer for you. geni.us/6y7b. Heads up! Links provided or mentioned in this video are affiliate links, I will earn a small commission, but only if you make a purchase using them. No extra charges are incurred by you. Thank you!

That is ALWAYS great to hear! Thanks for watching!

That's weird! Sorry for the trouble. The link seems to be working for me. geni.us/97ydV. This one might work better amzn.to/3T8ALgw It's the Cultures For Health Greek Yogurt Starter. This last time I made it I kept the milk at temperature for 15 minutes before letting it cool and it was the best batch yet! Hope those help.

This case has held up WAY better than the official Apple one I have on my work phone. They were both purchased at around the same time and are both used and treated exactly the same. The Apple one has been a heck of a disappointment. It's peeling and looks a mess. This one has some wear to the bottom, but compared to the Apple one, I can't complain at all. The light color isn't even showing any dinginess.

YES! I kept thinking "preston" and I knew that wasn't right. It comes with a Presta adapter, lol. Thanks.

Where are you located that you're seeing it listed for $250? I usually see it as around $99 and I've seen it as a lightening deal lately for as low as $65. We have are lucky enough to have several locations around here that have free DC charging so that we can use the CCS adapter. There are a couple of casinos, a shopping center and a few wineries... my suspicion is that that is why they are limited to 50 kw. They're nice enough to give us the free fast charging, but they don't want it to be toooo fast, so that we continue to shop or play.

@@darvasfamilychannel5563 no, there are two bigger sizes. If you follow the link it’ll give you the options. If you are using it on a passenger( or back) seat, should be great. They just may not fit on the center console.

My plate is the NutriChef electric crepe griddle. It just has a dial and the instructions for it say to use it at the max setting. For crepes and pancakes I've just always left it at that... sometimes it seems a little high, but I can't really argue with the results... I've only turned it down when I tried frying eggs on it.

If you mean the power supply? No, the power supply doesn't absoloutely have to be plugged in for it to work. The Square Stand can be powered by the ipad itself if you need it, or if the power goes out. Hope that helps.

I do have a Zebra. It is an absolute beast. I’ve used it for around 12 years. I changed out the thermal bar once because there was a thin line in my prints that bothered me, but otherwise it has never given me grief. I mostly use the Dymo for international and for a specific site that doesn’t play well with Zebra.

@@IannovichZebras seem to last forever especially the older ones. You can probably keep using it forever or until the drivers no longer work or aren’t compatible anymore. It’s too bad that dymo is going towards drm because they do have some good use scenarios.

I don’t think so. You have to plug the transmitter part into a NEMA 5-15 style outlet.

That's always great to hear. Thanks!

They are ususally! At least the most recent models. I've had other iphones submerged and they've done great. I think I got over confident when I realized it was in my swimsuit pocket in the hot tub... I didn't think it was a big deal and it seemed to work fine... so I took it in the pool with me... I think the hot water followed by the cold water caused it to expand and contract and that allowed water in and killed the original screen. The second screen was junk and caused all kinds of problems and ultimately failed after a drop so I replaced it with the Yodoit screen which was awesome. When I was installing that screen I think I thought the seal that came with the screen was a later step and I had to tear it in a spot to install it. I didn't think it would be a big deal, but then it went into the water in Sitka and it failed pretty quickly after I got it out, so I know the compromised seal was a problem. It may never be as waterproof as it was when new, but I was sure to install the seal in the correct order this time, so it's as waterproof as a replacement screen can be (without using silicone sealant, which I definitely considered).

Yes. That’s what the instructions show. We don’t use the top straps though, we just stowed those under the little blanket we have in there, just in case we need them. We just attached it to the console lid using the front and back D loops and that is secure enough for our vehicle. If your console lid opens from the side instead of from the front, you can use the front and back D loops instead and still attach it the same way. I hope that makes sense. If it doesn’t, please let me know and I would be happy to make a video that shows it!

Hope you love it! I have a Zoji, but so far I’m still just using this lil critter!

I’m going to be posting some videos of recipes soon I hope!

holy smokes! that never occurred to me. Standby!

Yes! Even the longest tip has close to an inch of clearance! Thanks so much. I just used it the way it came out of the box, but turning it over completely fixes that.

I know just what you mean. Thanks!

Thanks. I always try

Yes you're 100% right. Only that one tiny bubble in the center was actually under the tempered glass. All the rest, including that big one were under the plastic film. I'm not even sure how they could have gotten in there. Doing it under better lighting (and if I were wearing my glasses) would definitely have helped!

Here’s the manual with recipes

It’s such a great, compact design!

Neither was the refillable one. I’m not sure how much that one holds compared to these two.

Express