![Money saving Tips](/img/default-banner.jpg)
- 3
- 99 522
Money saving Tips
เข้าร่วมเมื่อ 25 ต.ค. 2012
Hi Welcome to my you tube channel. The aim of my channel is to provide fixes for every day items in a cost effective / money saving way. I have being doing DIY for over 30 years. Fixing things is my hobby (as crazy as it sounds) please subscribe to my channel so I can bring more fixes.
วีดีโอ
Replacing stuck Bosch Oven bulb cover
มุมมอง 99K3 ปีที่แล้ว
video shows you how you how to release a jammed oven bulb cover with everyday items you may have around the house no major tools needed.
Thank you! Great tip
bloody well worked. thanx kindly
Same oven as I have . Before I saw this tip I nearly gave up. I tried for ages to get the glass cap off . Then saw this . Absolutely brilliant. Spayed WD40 . Left it 15 mins . Effortless to come undone. Thanks so much for the tip.
@dannywillis7143 great news. Glad it worked for you . Give us a subscribe. 👍
Done @@moneysavingtips7006
Thank you for this
Thanks mate.. tried every ounce of brute force, no way was it budging! I had a tiny bit of WD40 left in my can, put that around the edges and 15 mins later came back and off it came!
Thank you. I did it your way
He prefers "Robbie" but Bob will do.
Rubber glove - great hack!
Nice idea . It has worked. Thank you. I was able to open it after 1-2 min. So maybe not needed to wait too long .
Hi Kris, happy it worked for you.👍
Thank you so much for this simple "trick"! Been trying for months to get the glass off and not succeeding (putting it down to be over 70 now😢). Watched your video and gave it a good spray with WD40, left it then gave it another spray for good measure and left it again for half an hour and using the magic glove off it came. As you say leaving the WD40 to soak is the key - patience. Super pleased👍😀
Hi Ken, thats exactly what I went through to get to this fix. And once it worked I had to tell everyone. 😁 so please it worked for you.
Me to 😂
Poor advice really. WD40 residue will stink your kitchen out for days when you heat up your oven again, not to mention its not food safe. I had to use a steam cleaner to get rid of any residual WD40. Use a hammer, screwdriver or wrench to remove a stubborn oven bulb cover. DO NOT use WD40 - you have been warned.
Thank you kind sir. The marigold turned my fist into the hand of god and the cover came off instantly 😂😂😂
Absolutely brilliant 👏 👌
Agree with others here. Special ‘tool’ made all the difference. Thanks.
moi, c'est l'ampoule du four brandt que je n'arrive toujours pas à dévisser après avoir sorti le cache, j'ai vraiment peur de l'écraser en dévissant, je vais appeler un réparateur ou passer par l'extérieur du four !
I’ll save you all some time.. use channel lock (tongue and groove ) pliers. Gently grab the lens cover and work back and forth. It will take very little torque to work it free. Don’t bother using a rag or anything to protect the glass. Use a gentle touch and have patience.
Hi, Rob definitely a good way forward. James I did have one of my subscribers who tried that and unfortunately broke the glass covering. They must have applied too much pressure. But like you said it has to be done very, very patiently. thanks for the tip.
Worked for me on a Neff oven. WD40 worked extremely well as had not been able to budge it previously. Thank you very much
The WD40 might have helped, but I had to suffer the wrath of my wife as the residual oil smelled up our kitchen for a few hours. Had I known I would have just taken it out without it or ordered the correct tool from Amazon which is only $17. To make it easier on the next guy I did not tighten it back very much.
Thanks. WD40 sorted it immediately, I was about to take the entire oven to pieces!
We had exactly the same issue with exactly the same Bosch oven model. Tried everything and was at the verge of calling an electrician. You saved the day. After soaking the wd40 overnight it finally unscrewed and hey presto ….. .. and we have light. Thank u sooo much.
@user-oo9uh2rb1v glad it worked for you. 👍 Please give us a subscribe.
WD40 & Sellotape used, as I didn't have glove. You're a star
Thank you and Well done suzie. 😀
Hello mate, this worked a dream for me, thanks! It also saved me a tenner ordering one of those plastic cap tool things too. Cheers again 👍
Tried the WD40 but unfortunately I still can’t remove the bulb cover
my issue is same, ok, i will try this way! thanks
Was thinking to do this. Trying it in a mo!! Is it worth putting the smallest smear of blue grease around the cover to stop future sticking ?
Hi , yes definitely give it a shot. Don't use blue grease as I belive it is combustible. Once you get the cap of using wd40 will be enough for future also. Hope that helps.
Can't thank you enough. After a very stressful hour trying to remove a solidly stuck bulb cover on a Neff oven we eventually found your video. After initially not being too keen to use WD40 in an oven I gave in and applied the ever faithful WD40 (what do they put in that?). After leaving for 10 miutes and then a little wiggling it opened very easily. I had previously used the special cover removal tool five years ago when the bulb went but this time that proved in effective. Much appreciated. Thanks for putting it out there.
Absolutely brilliant. So happy. 😀 Don't forget to like and subscribe. 👍
¡Many thanks! Worked so well😊
Great news Sylvia. Don't forget to like and surprise. Have a great day.
This worked for me and I am thankful I did not have to buy the removal tool because it is not cheap. I did two sprays of WD40, waiting about 20 min. after the first spray; still couldn't get it loose. Then sprayed again and waited a few minutes. The rubber gloves are a very helpful hint.
😋 @ 7/8
Use a oil filter removal tool to get a grip on ones that refuse to move by hand
I don't have one and a bit expensive for a one off use 😁
@@moneysavingtips7006 About a £5 on e bay,
Wow, thanks mate! Yellow rubber gloves are the real game changer!
I have gorenje stew and i can remove cover, but light bulb is stucked...
I have gorenje stew and i can remove cover, but light bulb is stucked...
Thank youuu! Our instruction manual said to turn glass cover ANTI-clockwise, so even that little tip to turn CLOCKWISE helped us!
So happy the video helped you. 😁
Your "secret tool" to remove the bulb cover is so simple!! Thanks - worked first time!!
Many thanks . So glad it worked for you.
I used an oil filter wrench.
that's how to do it. WD40 is for sure good enough for that but if you need something for stucked/ruested bolts etc. get the Deblock Oil from Innotec! After soaking a rusted bolt over a week with WD40 without success someone gave me a bottle Deblock Oil and after first application and about 2 hours later the bolt was loose👍
Perfect solution, thanks!
Thank you - rubber gloves worked without the WD40!
WD40 worked, but now its smoking and stunk out the oven -_- seems poisonous !!
Thank you for the tip here - unfortunately it did not work for me. However I was able eventually to remove the glass once I realised that there was no way it was held by grease. In fact the glass moved slightly from the beginning but then clicked against metal. My solution was to use a kindling of about 10" and tapping it with a hammer while resting on the slightly raised part of the glass cover - the glass released perfectly.
ça marche, Merci Beaucoup !!!
You seriously rock!!! Thank you!!!
Thank you. ...You rock also 😀 Dont forget to subscribe.
Excellent demonstration. Saved me needing to get the weird little tool other videos suggested. Great work!
My pleasure John. Have a great day.
I watched 6 different videos on how to get the bulb …I was still to weak..so I used a oil filter wrench ..off in 2 seconds
The WD40 and the waiting time around 10mn (important) did the trick for my NEFF (type HBB-AP71-7) stuck bulb cover. No other tooling needed for me but what's in the video. Thanks for sharing this demo!
My pleasure.. im so glad it worked for you.
It works! Thank you for that! I have used all the “Amazon Tools” without success. WD40 & gumi hand gloves are better
Worked!
and the smell of wd40 in the oven and your food ?? or was it not a problem /
Hi Tony, Just a couple of quick sprays of WD. Will do the trick. After it has lossen the lighten then wipe all area down with a anti bacterial wipe. Also WD40 is not flammable so you are ok using around ovens. But make sure you wipe down with anti bac wipes before oven is used for food. Also another idea is after you have fitted the new bulb but the oven on full for 30min. This should do away with any smells. Hope this help.
The washing up gloves did it! We'd been trying for an hour with the stupid tool and I was looking for tips on here. Thank you so much for this!
Hi Lillyankh, Good to hear that it worked for you.