- 33
- 104 559
Stitch & Cars
เข้าร่วมเมื่อ 7 ต.ค. 2019
2016 amg c63s
learning about cars and enjoying cars
learning about cars and enjoying cars
Hellcat redeye CEL P0ea7
car came in for active CEL video showing the steps I took to figuring out the sorce of the issue
มุมมอง: 20
วีดีโอ
C63s GETS UPGRADES !
มุมมอง 1282 หลายเดือนก่อน
2016 c63s get upgraded mirror caps and blow off valve and some sound clips
Car & Coffee OKC 08-24
มุมมอง 4093 หลายเดือนก่อน
Cars and Coffee here in my city showing whats out there
Mercedes-Benz C63S #automobile #mercedes #mechanic
มุมมอง 844 หลายเดือนก่อน
Installing a simple but efective k*ll switch ON my 2016 C63s and showing how to install a dash cam all at home
You won't believe this Car
มุมมอง 2454 หลายเดือนก่อน
Unrevealing my new to me car for the chanel ,not much will change besides maybe the channel name .but follow along to see how it goes
Street car take over and corvette disater !!
มุมมอง 1875 หลายเดือนก่อน
Street car take over car show and a big mistake with the corvette
Silverado Brakes Replacment & Code C 0221/C 0222
มุมมอง 966 หลายเดือนก่อน
2004 chevy silverado has ABS light on dash due to codes C0221/C0222 which was due to a wheel speed sensor and showing how to replacing brake pads/rotors
Custom Cold air intake for C6,LS3
มุมมอง 3507 หลายเดือนก่อน
made a custom intake out of the oem not sure if it improved anything but the looks
STO ,C8s ,Mclaren,Hellcats at OKC auto show
มุมมอง 2428 หลายเดือนก่อน
Showing some of the cars in the OKC area lots of supercars ,classic cars,musle and jdms
C6 corvette high speed death wobble
มุมมอง 7K8 หลายเดือนก่อน
showing you all how to replace the rear toelink , had my car do the death wobble at high speeds and was not the best feeling :(
Serious problem with the corvette .............crank sensor
มุมมอง 1.6K9 หลายเดือนก่อน
changing out the crank sensor on my c6 grandsport due to it not starting or no rpm signal
Roll Race Night
มุมมอง 35710 หลายเดือนก่อน
Roll racing in GTA 6 was cold out so not much luck but had some good runs and fun times
C6 Carbon Fiber Steering Wheel w/Shift Light
มุมมอง 3.4K10 หลายเดือนก่อน
installing a aftermarket steering wheel with a built in shift light and information screen .
Camaro GETS LONG TUBE Headers ...stainless POWER
มุมมอง 56411 หลายเดือนก่อน
Camaro GETS LONG TUBE Headers ...stainless POWER
More Mods for the c6 vettt… catch can and infirai lights
มุมมอง 758ปีที่แล้ว
More Mods for the c6 vettt… catch can and infirai lights
“Review” on a daily driver c6 corvette Big Cam
มุมมอง 3.3Kปีที่แล้ว
“Review” on a daily driver c6 corvette Big Cam
Short DIY changing oem tail light housing to aftermarket lights ….bonus run at end
มุมมอง 520ปีที่แล้ว
Short DIY changing oem tail light housing to aftermarket lights ….bonus run at end
Mustang throws down !!! Tail light install
มุมมอง 304ปีที่แล้ว
Mustang throws down !!! Tail light install
2017 Camaro rear morimoto tail lights install….(CAM for the VETT )
มุมมอง 404ปีที่แล้ว
2017 Camaro rear morimoto tail lights install….(CAM for the VETT )
Speed engineering long tube headers on ls3 c6 corvette !
มุมมอง 33K2 ปีที่แล้ว
Speed engineering long tube headers on ls3 c6 corvette !
Great Video! Just 2 question, The red wire thats in the steering wheel(that needs to be connected to 12v power) where did u connect it to? And the white wire the comes from the box where does that connect exactly on the steering wheels as well?
Man them vetts look easy to work on. I'm surprised you haven't lowered it yet. Nice american muscle.
Red wire and the long white wire , which wire connect to?
The white one should go from the box to the steering wheel
@@StitchCruzinhey bro, how does it connect to the steering wheel? Or does it connect to the red or blue?
You have to relearn the new crank sensor no?
@@joshmarauder I didn’t have to just disconnect the battery and reconnected and it was good to go
When I push on the injectors when the car is running I do here a his noise Mabey they are leaking air but only if I touch them and push on it
Sounds like either you have a fuel problem or a air problem
I have the same code on my hellcat after replacing the engine and getting it tuned runs fine untill I hit wot what do u think it could be spark plugs are brand new less 1500 miles so I’m kinda guessing it’s not them but idk what els it could be ran fine when I had the other motor in so coils should still be good
That wobble was 100% caused by those old Michelins if they were super sports. I bought those tires when they were first released around 2012 for my c6 z06 and the wobble started about two yrs later when they had more than half the tread left. Running toyos since with zero issues up to 160
Yeah I figured that out shortly after
W1
Where did you connect the red and the long white wire?? Looks like to the airbag?
It goes to the steering wheel Box that it came with
He asking where the red and white with connect too because it connects to something like the airbag
Great video, this is how it’s properly done. Revs, fly bys, etc. Gorgeous car 👍
Thanks 👍
What happened with the vette, are you fixing it
No I wasn’t able to repair the car and didn’t have time to
I’m getting a rough idle at start and I have the red lighting light, I basically bog out when I floor it and it goes into dead pedal mode, my codes are p3032 p3000 p2227 you have any idea what my issue could be? Changed throttle body and ecus/pcm and still same thing
Is it stock ?
@@StitchCruzin yes completely stock other than a bwoody air filter but I changed the stock one and does the same thing as well
@@benyloaf1559 did you program the new PCM to the car ? if you know how to I would check the pcm to make sure its getting 12v with key on engine off .basied off the codes its due to barometic pressure circuit Also check the 4 sensors on the supercharger and make sure the wires are good and that they are plugged in and if the have tabs that the tabs are in all the way
So I found out that the pcm/rf hub/bcm were all from a 2016 and mines is a 2016 so the vins were miss and matched so we flashed them and put a new ecu but it would just start and stall out right away after flashing any idea what that could be? No codes after flash and programming it to 2018 recalibration just starting and shutting off now
I’ve checked for bent fuel lines looses hoses or any air leaks and nothing everything seems to be connected and in order
Can tell this guy doesn't know shit about cars, totally passed the grand national on slicks 😂
@@gavinharmon8803 I know nothing about cars 🚘
I need you 2 mines.
Congratulations on the new car🎉🔥
@@owamamazongolo8200 appreciate it 🙏
Y’all can stop that Mexico lie we police already kno what that means
@@4everyoung869 it’s an AI generated video in Mexico;)
Good vid. Not sure if you can answer or point me in the right direction but here it goes. 2016 Hellcat. I get a ticking while under acceleration. I don't think its the injectors. Kind of sounds like knock, kind of like you get with bad gas or low octane. Can't hear it at idle. No active codes on the dash. Once its hits 2500rpm or higher, you can hear a slight tick/sputter. I know you can't diagnose a car on the internet but would love to hear your thoughts. I have read it could be anything from an exhaust leak at the manifold or collector to a lifter or possibly a rocker issue. 93 Shell, Chevron or 94 Sunco always put in it.
I know on the 5.7 the headers bolts break and cause a exhaust leak that sounds like a tick/knock but fuel knock can happen but depending on the mileage I would check the spark plugs and run that gas out and try from a different gas station if Possible You can always add in fuel system cleaner to help with that and if u have a breaker bar you can put the handle up to your ear and the other end on different parts of the engine while it’s runing to listen for the noise to see if it up top or down low
@@StitchCruzin Thanks. Yeah, I've tried gas a different places, no change. I have tried Chevrons complete fuel system cleaner and no change. I do have a mechanics scope, but couldn't hear anything at idle. I only get the marble in a can sound around 2700 rpms. I dunno. Its possible it could be the start of lifter tick. I would like to think if something serious, it would have thrown a code.
That's pretty sweet!!
Your car sounds awesome! And that steering wheel is hot
:(
Stopped watching as soon as I heard music
hell ya thanks
Even going normal speed can you hear the wobble?
its not really a noise but more of swaying rear end
I was getting speed wobbles under hard excel third to forth. Well what was causing it was my 345 rear tires on the stock rims made for 325. Soon as I went back to 325 tires the problem was solved
yeah i think mine may of had to do with bad tires as well
What scanner do you use?
Otofix D1 It’s on Amazon for around 450 and it comes with 2 year free license Really good scanner
@@StitchCruzin If you work more on GM car, i want to invite you to test our scanner, Not sure how to message you.
C6 or ls3 swapped f body?
c6
Do it makes any noise because i have 2012 ls3? Please let me know ty. 🙏 god bless 🙌
mine wasnt making a noise you could just feel it but it ended up being the old tires i had
Glad I found your channel. Your car is beautiful. Did you color your wheels ? I also have a 2011 Grand as well. I’m getting tired of the crime and looking for some input.
Thank you and no the wheels came that way when I bought it
So did it fix the issue?
Yes it did but I also had bad tires which I found out later
Nice. What tires did you have on?
Some old Michelin tires
I seen the one on Amazon for about $600. How has it been holding up any issues ?
No issue if properly install works super well
@@StitchCruzin . I love your video. Question are you able to change the LED lights colors? Also I seen a video where it was able to change the logo to the Chevy etc. are you able to change the logo?
I haven’t found anything about changing colors or logos on mine
Thank you very much my C6 Corvette brother!!
No info on the type or brand of carbon fiber steering wheel with shift lights in the description? Dude don't leave us hanging lol
Lol sorry man I got it as a gift but I think on Amazon I believe but I’ll ask
@@StitchCruzin Yes please. I've been wanting that for my C6
@@cobraconvert it’s on Amazon and the manufacture is top10racing sorry I couldn’t get the link
What a sweet c6 gs.
Thank you!!
Mine is slightly rumbly when its sitting idle, and i swear i hear a slight sputter, she has a bit under 21k for miles and i kinda assume that its the sparkplugs.
If it’s not your spark plugs I would check your injectors for a stuck one
Do you have any issues with the rear Camera staying on??
No issue with the reverse camera
yoo that sounds sickk
Appreciate 🙏
feels like Oklahoma. Lived in Moore until an F5 wiped out my house in 2013. Nice Vette
Appreciate it and Yeah that’s Oklahoma for you but glad you’re good
Awesome Grand Sport. I'm in the okc area too, and thinking about upgrading to a C6 GS from my 1990 C4 here soon. Get a K&N drop in filter, the factory is very restrictive, it'll sound better too.
My dad has that code and now he’s crying because he switched the plugs and coils and still has the code and the exhaust straight smells like un burned gas bad and it’s throwing white smoke .. what do you think it is bro ?
unburnt fuel so it running rich does it feel choked out like under power could be a bad o2 sensor or clogged cat as well i would look at those
@@StitchCruzin we’re going to check the fuel injectors since it’s basically flooding the fuel I’ll give you a update , and if that ain’t it we’ll go sensor to cat like you said
@@MannyMopar sound good let me know what you find could be a injector stick open
@@StitchCruzin took out driver side fuel rail and put it on the run position 1 of the Injectors was wide open , just ordered the part will be here tomorrow I’ll keep you posted
@@StitchCruzin replaced the Injector no more misfire , Exhaust and idle is back to its original sound , BUT There is a nasty Tapping sound like a Lifter Tap … by your experience what could it possibly be ? It wasn’t doing this before the misfire situation.. it’s a 2015 challenger HC original owner 40k miles
How much did you pay for it if you don’t mind me asking? I was looking at a 2013 grand sport with 45,000 miles on it a few days ago at a dealership, and the wanted 42k for it. I was thinking that was too high
I got mine right under 40k with 26000 miles
Hello, I got 2015 Hellcat abd today i saw engine light, diagnostic wrote P0300. I have 16 000 kilometers on it. Do you think it is spark plugs? And what kind of spark plugs is good? NGK laser iridium? Thank you for answer 🙂
That’s low mileage but it does depend on how you drive it and if has been modified it could be (spark plugs ,coils bad fuel , damaged wires) but those are the things I would check to start
Hello I sending update: Yesterday I changed spark plugs and problem is same. When i check diagnosticks code, there is P0300 still there 😔
@@ChallRT I would check into your fuel system someone had one of there injectors stuck open causing a miss fire
2 days ago I was on diagnostics and with live data and everythink was ok. Answer was i cant compare German engine and Hemi engine with shaking. Somebody asks me did you control ASD relay? Maybe it can be problem 🤷♂️. Idk..@@StitchCruzin
@@ChallRT ya honestly I’m not to sure I haven’t messed with that have you done a compression test
I have the chrome wheels on my GS but I love the smoke wheels
Hello sir, I am a manufacturer of car navigation screens. We have currently developed the Corvette C6 screen and have tested it on vehicles in China, and the situation is very good. But I am concerned that there may be differences in some parts of overseas cars, so I would like to install and test them overseas. For this product, we currently offer a very favorable price. Would you be interested in joining us and helping us provide feedback on its situation?
Nice vid informative I wanna lower mine on the stock bolts and see how it looks
Yeah I would love to get wider wheel so they fit flush but I might just get spacers so when I go to car shows
You bought a gm you bought a disease.
Who makes the arms that you used? Can you post a link? Thanks!
There made by FDF but I got them off of driftHQ.com
Could it be that easy.😊😊
Very easy but if you have rust build up some pb blaster before hand would help
I live in the mid west and last night i was racing in mexico😂I'm back at my house
Fast travel bro like forza lol
@@StitchCruzin🤣🤣
Hey man, use a jack stand when working under your car, hydraulic jacks are susceptible to failing and you don't want to be under your car when that happens.
Thank you and ya I slipped one in once I was actually going to work on it
STOP i can't watch any more especially when he pulled out the crescent wrench..
I can’t stop but how you get those hulk laughing faces ?
I had my 2007 C6 up to 145 mph on Saturday. No wobble
That’s good man was good till it wasn’t lol
My '07 is stable at 170
How far from the Mexico border are you? Lol
Please lose the back ground music. Otherwise great job thx for sharing.
I have it cuz my mic sucks trust me it sounds worst with out it