วีดีโอ

You butchered the rubber!

Not a car guy or mechanic...just want to understand what is the purpose of these parts?

The sway bar links bushings are to thick for the oem bushings collar on a Camry 2009 (USA)

Can you do a tutorial for PSB 258B for a Nissan Tiida /Versa front lower control arm rear bushing please ?

Is the concave on the top or bottom of the front bushings ?

its same size for rear upper arm ?

Easy & clear thank you.

Any way of tracking items bought in your website? Please reply to emails sent to your official email!

I did this job and now i have up and down movement whith a knoking noise

U need more light

i noticed there is a 60 mm and a 65mm how do i know which ones to get? i have an 01 gs300 stock suspension.

I brought one for a 2000 crv. It is very hard to put it in and you have to trim one of the ears on the bushing. Be ready to spend a few hours trying to get the bushing in.

It is unclear in your presentation whether the outer metal sleave of the original Nissan bush has been removed. By burning out the rubber I am assuming that the outer sleave remains in the crossmember. The reuse of the heavy inner sleave is quite obvious. Please clarify. Your written instructions on your website for these particular bushings state removal of the outer sleave and insertion of "new" inner metal bushings, this I'm guessing is your generic instruction for split type polybush replacement. Somewhat lazy and unprofessional presentation in my opinion.

Fitted these to my fabia and had problems straight away with the lower arm moving back and forth within the bushes.

It looks like you leave the outer metal shell of the original bush in place, is this correct?

I need help

What’s the life spend on them?

At what stage do you need the old bushings

Is lithium grease ok to use

You don't need a press, I pushed them in by hand. MK1 Octavia

😮Never use lube just soap n water

do you have a video for the 2007-2012 Nissan Sentra subframe bushing installation?

can you please do a video for the 2007-2012 Nissan Sentra subframe bushing install? thanks

If it rips during installation it probably won't last long.

supper cool

My car failed its MOT for one of the bushes - as per one of the other comments got a cheap bushing tool from Amazon for £25 and replaced them without dropping the subframe. The PSB bushes fitted so much easier than I expected and reassembly was really quick and simple... the hard part is removing and control arms from the car in the first place.

Ooohh wait so you don’t need to remove the outer sleeve? And they come with new inner shafts?

How’d he get the old shafts so clean?

How durable are these bushings? Last a long time?

Hello boss, can that bushing be responsible for the sound that can be heard from the right rear of a bmw e46? I leave you this link where you can hear how it sounds! Thank you very much! th-cam.com/users/shortsNNwF5Ogbvmw?feature=share

What’s the part number please?

Just about to fit your PSB bushes to used R56 arms i got for my R53 along with a load of other bushes :)

Just wondering why isn't the picture for this a R50 or R53

Hello I was wondering if you guys have a kit for 2009 Nissan Sentra 2.0 front subframe?

There are two bushes for the housing, are they the same bushes for the front and rear

Where did you buy those bushing I need for the montero sport 2003 model

Filmed with potato cam 3.0

How did you press it in so easily? I have the same one and it is near impossible to push it in. Did you freeze it?

These are very low quality poly and the sleeves are made out of aluminum,u are going to be sorry and have to do the same job twice

I fitted these recently to my R53 and it transformed the car. Easy to fit with a £30 tool from eBay. I had the subframe dropped though as I did a load of other work at the same time. cheaper than Powerflex and Superpro and at Shore 90 they are between Powerflex Purple and Black in hardness.

Can't understand why so many people showing "How to DIY" by hitting from the outside in. When ATG, you and I do it from inside out (0:35), the correct direction of hitting out the bushing. With tips from ATG & me, saw a little off on the metal bushing ring & make sure you DO NOT cut into the arm. Only a light hit on the bushing's ring is needed.

Is the oblong hole installation correct? The Oblong hole faces the outside of the vehicle on the factory bushings

did they discontinue the bushings for Kia and Hyundai? Their websitedoesnotlistthem, and a search of the part number yields nothing. Hmm.

Getting the sub frame out is the hard bit !

i just did this job with these exact bushings and method. once you burn off/scrape the old rubber bushing (longest part of the process), i wire brushed the metal clean. lubed them up just like the video and BAM! done. it was like 5 min to lube and slap them in with a rubber mallet. so far im happy with them! i will be installing the subframe tomorrow, curious to see how long these will last!

I've just brought this for our mini looking forward to getting them fitted

Insufficient lubrication

what are symptoms of the bad bushings

Hi. Can these be installed without taking the mount off the vehicle? (Savin dropping the subframe)

עבודה יפה ומקצועית 👍❤️