วีดีโอ

Thank you very much Alex,

I don't think so, return the signal into the yamaha on channel 23-24.Rout all channels to stereo out,and channel 23-24 to adat 1-2.That's what I did.

Hi Brazil,thank you for your comment,they are wonderfull indeed. Greetings Marc

Hi Antwerp,thank you for your nice comment, the DM 2000 is indeed a wonderfull mixer with a lot of things in it that I have to take a look at.I think I will make video's of my explorations,to support my memory.Kind regards ,Marc

Thank you Feelicks for your nice comment.I have a lot of fun there,kind regards, Marc

Hi Paul,I no longer have the O2r mixers.Now I have a DM 2000.But i have inserts going trough adat i.o. , the effect out is going to to the input of a behringer adat ultragain pro 8.and then trough optical cable to my yamaha.I use the preamp and gain knobs of the adat ,then I can rout it to any channel I want.I remember that channel 1 to 8 on the O2r has an insert jack on the back.I hope this will help,kind regards Marc

@@paltrock. Hi marc, not sure if i understand you correctly but yes you are correct marc the yamaha02r has 8 insert inputs. I can not get my device (compressor) to work via insert input with the ADAT input channel, do you remember how this can be done? Many thanks marc

@@pauldiaz4273 Hi Paul,if you use the inserts on the channel,you need a split cable,one jack on one end ,plugged in the O2r,and two jacks on the other end,going in your compressor.I have used aux 1 to 6 on the yamaha O2r to connect compressors etc.and the returns on channel 21 to 24.I have never used adat.I'm using it now on the Yamaha DM 2000 throug an interface.(ultragain pro 8 behringer )then route it on the yamaha.

@@paltrockyes marc the cable is called TSR (tip sleeve ring) cable it is like a Y cable. I have that connected already my problem is my yamaha 02r does not reconize the Insert input with ADAT input. It recognizes Insert input with only Mic/Line inputs on channel strip. Is there a setting on Yamaha 02r i have to set to recognize ADAT and Insert inputs on same channel strip?

@@pauldiaz4273 I am sorry Paul,I wish I knew.

Hi there,the O2r has 4 slots,so you can insert 4 adat cards ,or optical cards,what ever you want.With two adat cards you will have 16 channels in out optical.I use one optical and one analog card.{Nice music you have on your account)Kind regards Marc Stam

@@paltrock Merci pour la musique et la réponse. Mon problème, c'est que ma carte audio n'a qu'une seule entrée et sortie adat. Je pourrais toujours exploiter les 8 canaux restent en analogique, puisque je peux déjà envoyer les 16 canaux vers dans le pc en firewire . Mon but, dans l'idéal, serait d'éviter autant que possible jusqu'à l'entrée dans mon 'ampli, de convertir le signal "N/A/N/A" si je peux l'éviter. Ps. Je n'ai pas encore la O2r que je devrai bientôt l'acquérir. Bien à vous Jérôme.

@@compozic8161 I have good results with 8 analog and 8 digital.Good luck.

It's gone.no problem.😬

@@paltrock it's gone when word clock is activate/On ??

@@studio.zemmour no,i took it out.

No valid software found on unity card in slot 1 please upload valid software...?? Solution ?? Please

@@studio.zemmour maybe it is broken,the software must be on the card.

Hi Alexander,thank you for your comment.I have used it on windows 7 ,linux is maybe a better option.I love the trombones, kind regards Marc

Ola,the auxiliares 1 to 6 needs a return channel,for an effect unit or something.You can use the EQ and compresion from these channels.Kind regards Marc

Hi there,thank you for your comment.When I use the compressor in the TC Unity card,it opens the mix,there is I think more low- mid, so it is like there is less harshness.Kind regards Marc

Hallo Howard,I think it will transmit 8 channels,kind regards Marc

​@@paltrock Thanks for replying. Unfortunately my O2R gave up on me a couple weeks ago with a series of "CPU fault" errors. I tried resetting the cards and factory rebooting to no avail. The whole system was getting pretty tired so I went out and bought a used A&H ZED-24. Of course it doesn't have the digital capabilities (only a stereo 16 bit usb output) but it is a fairly nice analogy console and I already have a decent DAC.

@@HowardBaileyMusic Hi Howard, thats bad and good news,A&H is good stuf, and analog is nice too.Maybe if you open the O2R and give it a vew punches here and there ,who knows,nothing to lose.Good luck.

Hi Howard,thank you for your nice comments,I think ,that you have everything you need to have a lot of fun.I have my stuf set at 48khz.Kind regards Marc

Hi Jay,thank you for your nice comment,and you noticed the bike.👍Under the Behringer monitors I have two old Celestions connected to an old Pioneer amplifier,sounds wonderfull.Kind regards Marc

Hi Juan,thank you for your comment, I love to be a hero.I had a lot of struggles with the O2r ,that's why I made these video's.I'm glad it helped you,kind regards, Marc

Hi Peter,that is possible, you can use the adat in out for recording and play back,and the inputs of the yamaha for playback,if you don,t have the analog card.Kind regards Marc.

Hi Chrstopher,thank you for your nice comment

Hi Atcordice,thank you for your comment, I can do that on my Yamaha DM 2000.With the old O2r I can't, there is no USB port available.Kind regards, Marc

Hi You,thank you for your comment,very important.Kind regards Marc

Hi,thank you for your comment,i am sorry for the pain i caused you.This video is about how i connect the o2r to an interfaces,nothing more.Kind regards,Marc

Back in time,kind regards Marc

Hy Icaise,thank you for your nice comment, always nice to hear,kind regards Marc

Hey,thank you for your comment.For me this was the way to do it,because I allready had the behringer Uphoria 1820 interface.There is a part two after this video ,this set up wasn,t nice to work with, the later setup is wonderfull.Kind regards and succes ,Marc

Hey Coki, thank you for your comment. I am not a specialist on the O2R ,just a user.The first thing I do is a factory reset. Hold the left cursor and turn on the mixer.There is a video were I open the mixer and I checked the fuses and loose connections. th-cam.com/video/k0or8VQZ7Ao/w-d-xo.htmlsi=AdJv50wKRBUlUmKf That's all I know about the technical aspects of the mixer.I had a simular problem once, and I tried to check the components by moving them a bit,using rubber gloves.Thats how I discovered a loos soldering. That is not the propper way I think.For me it worked.I wish you luck.Kind regards ,Marc

Thank you Dear Marc for your answer, I was so happy yesterday that my 02r started, I did all test but today again doesn't start. I think it's must be some bad connection , just a little one but make me problem. I am looking all yours videos, I love the ambiance. Thank you for your work! Have a beautiful week Marc! Hugs!!❤🙏

Hey Coki,thank you for all your nice words,I hope you get your O2r running again,just take your time,Hugs.@@cokimarquez2009

@@paltrock 🙏❤️

Greets from Holland,id regards Marc.

Hi Dimitrios,thank you for your nice comment.You can download the drivers of the UMC 1820 from the Behringer side.After that,connect the unit to the PC,and install te drivers,restart,and now you can select the UMC 1820 as your sound card.It has 10 analog outputs 6.3 jack,and 8 adat outputs.I use Cubase pro, with Dolby Atmos and that arranges the sound.I don't know if you can do that without the dolby software.After this video I made another video about this set up. th-cam.com/video/kWD9WzHmdsk/w-d-xo.htmlsi=j65apmp707OiFGkA with something about selecting the channels in Cubase.Kind regards Marc

Hi Lucy,thank you for your comment.I think the O2r is a very good choice for your synths,you can store all your settings in the memory of the Yamaha.It,s a very clean sounding machine,good luck with it.Kind regards Marc

Thanks Marc! very helpful. Looks like I might be buying one then :) @@paltrock

Hi there,thank you for your comment.With a multi channel interface I can record and mix in the O2R and bounce it back to my DAW again without latency.I can use and record the effects of the O2R too,I love it.Kind regards Marc

Hi Alex,thank you for your comment.I was joking about the Stradivarius,but suprised.It is old but I don,t think he had anything to do with it. I will make it playable and I will have fun with it.Kind regards Marc

Ah lol! Yeah exactly it just has to sound good right?

Hi Paul,thank you for your comment.You need an exturnal recording device.I use several interfaces,the cheepest one is the Beringer UMC 1820,a multitrack recorder,in combination with cubase on the PC.I don,t hear the difference with the Steinberg UR 824,higher in price.If you buy an O2r ,try to find one with insert cards,in and out.Good luck,kind regards Marc

Hello ,I have never used coax kabels.I have had an m-audio fast track pro,and I had used jack 6.3 mm kabels to connect my o2r to the m-audio interface,and that was connected to the computer with usb.Kind regards and succes, Marc

Hoi Eduard,thank you for your nice comment.I bought the magnetic tape and the labelprinter at Ali express.There is a video aboet the labels,kind regards Marc th-cam.com/video/TQllTw-OG1g/w-d-xo.htmlsi=yM0P_PBjvGzmb_0u

Hi there,thank you for your nice comment.When studios bought these TC Unity cards they were registered,and i think the eproms were involved, maybe thats why the cards wont work without the eproms(2000 hours). Once I bought a card without the eproms and I coudn't use it.The Eproms I showed in the video are the two dedicated to the card and I think the licence.These cards are so old,if you can buy one working,with the eproms, there is no problem with the 2000 hours.Kind regard, Marc

@@paltrock Thanks Marc! If I power on my 02R while holding UTILITY it shows me Version "2.16TC" So it means I have already the TC software on my installed EPROMS? What for OS version your 02R with your EPROMS as shown here th-cam.com/video/XPXfn23_Wac/w-d-xo.html and with working TC Cards shows?

@@modularcodeswitching 2.16TC is written on my eproms ,thats an O2R with tv unity card in it.If you open the back you can see the two eproms.I will make a little video about that matter,and about the settings.

@@paltrock Hello again Marc! May you have a "Visualizer 03D" Software from c-mexx for 02R too. I have it, but on disk #3 one dll file can't be copied ;( I can't get the old devoloper via email...

Hi,I never had a visualizer, I didn't know about it.It looks cool.Do you need a special card too?

Hoi Bart,bedankt voor je leuke reactie,groet Marc.

Thank you for your nice comment, there is an other video about the set up.Kind regards ,Marc

Hi Willard,thank you for your nice comment,kind regards ,Marc

Something to think about,thanks.

Hi there,thanks for your nice comment.I didn't know about the sale.Kind regards Marc

Hi Brandon, nice to here from you again. I have a DM 2000 upstairs ,and a DM 1000 in the workshop downstairs and they look a lot like the O2r 96,the one after the old O2r..The latest DM serie is out of reach for me, but they look nice.For me the DM 2000 is the ultimate.Kind regards Marc

Try Ebay,

where to buy it

Hi Thorodinson,I recorded it with an extra camera,Kind regards Marc