วีดีโอ

It’s definitely not a trail side feature that’s for sure. Too many small parts fall down inside the frame cavities.

👍

When they drag or don’t retract it’s because there’s air in that particular piston. Whichever one is dragging, press it in to send the air up to the lever and let the bubbles out during a bleed. Air in the pistons causes them to push out towards the rotor. Thanks for the comment.

Good song 🤙

Nope 2023 5010 in matte gray.

I’m about to order those. I have heard of those before. 130$. They have black, silver and gray. I think I’ll order black.

Also the dt has the ratchet that spins longer than the i9 which has the pawls that drag pretty bad

That’s funny I’ve been wanting to try that. Thanks for the tip!

@@spicymountainbike Just need a punch to hammer the pin out and then put the new lever on and hammer the pin back in. I tried finding a hammer with a plastic hammer end which wasn’t a mallet. Ended up just using a bottle cap on the end of the hammer.

I just got a Magura lever changing kit. I tried some oak components root levers but I didn’t like them. Should’ve just ordered hc3 levers for my mt5 instead.

I recommend just 1 token. I put 2 in the time of the video but I took 1 out. The ideal suspension has been with just 1 token. I use 55 psi in my forks. I weigh 160lbs. You can run the forks soft so they handle better with 1 token.

🤙

prenderò solo un po' di vino e formaggio a Venezia invece

@@spicymountainbike bravo si vede che sei un intenditore😂😂😂😂

😂🤌

Thanks man more vids coming soon!

That means a lot thanks for that comment. I’ll keep it going!

Thanks!

Never heard of it but I’ll check it out. Thanks man!

Glad the video helped you out! I wrapped 3 bags on there because sometimes those Walmart bags have holes in them. It works a lot better than the old towel! ✌️

It’s a fun spot to ride. Still got the 5010. It’s still my favorite bike. Next video will be with the 5010 for sure.

Utilicé un cepillo de dientes, una toalla de microfibra y un spray desengrasante simplegreen.

You know I thought the same thing at first but yeah the corner speed is insane and the traction in turns is substantially better than my 27.5. Actually the entire ride has become incredibly better. Climbing is slower than 27.5 but a lot smoother with better traction. I’ve only ridden that bike one time so far and it’s still the best ride I’ve ever had since I started mountain biking in 2015.

@DestinationDiariesAI-s3c El Paso Texas. You can find the trails by searching the trail names in the video.

🤙

www.amazon.com/stores/Granite/page/805E2253-EAEA-43C0-AB2B-26C7E5EA5500?ref_=ast_bln&store_ref=bl_ast_dp_brandLogo_sto It is smart man. I’m really impressed with the design.

I have some other videos on bleeding the maguras. If you got oil on your pads you will have to replace them first before you can bleed the brakes. All you need to do is put the funnel in the bleed port on the top of the brake lever and put oil into it and squeeze the lever repeatedly until all the air comes out. Go ride and then repeat the process. Eventually all the air comes out. Watch some of my other bleed videos g.

You have to have it exact. Theres not much room.

Yes you have to flip both sides at the same time. If it feels loose check your bolt and make sure it’s tight and that you didn’t lose the washes that are on the side of the shock body.

I had 2 tokens but then removed 1. It’s been pretty good with 1 token but I’m not too impressed with the new pike. It’s too flexy and I can hear some kind of metallic cha Ching sound when I jump at certain angles. I should’ve gotten the lyrik 140mm fork.

🙌

🤯

Yeah the Lewis are ok but you’re better off with the Magura hc3. He’ll probably end up getting maguras too eventually.

Thanks man. The 1/1 is definitely my favorite hub

Mt7 with hc3 and mt race line with HC lever.

For sure man tannus is great. The only reason I use cushcore over tannus is that you can ride with a flat with the cushcore. I do prefer tannus otherwise

@@spicymountainbike I’m 60, so ole Skool. Always ridden with inner tubes. Never will trust a tubeless setup, so now I ride with self healing inner tubes and a Tannus Armour insert. I’ve only ridden it with a flat ONCE and it got me home, no problem but I wouldn’t do it again.

@user-ot2qg8np8y 60 is not too old for tubeless. You’ll enjoy riding a lot more with tubeless installed. I still use tubes in my dirtbike though.

1/1 feels lighter and more efficient even though it has Abec 3 bearings and the hydra have abec 5.

@@spicymountainbike interesting. Thx!

🙌

Can’t blame them.

If I hit 1000 subscribers I’ll change mine to 27.5 with a 160mm fork.

I think it took me an hour the first time I tried it. It’s hard not to let the pieces fall down inside the linkage. Thanks for the comment! Glad you found this video!

SMALL

@@spicymountainbike What is your circumference? (Sorry, I want to base it on my size)

@@spicymountainbike My circumference is 55.5, but I'm afraid the helmet is too shallow (it won't sink inside the head)

@allanleal I’m at about 21.7”. I’m in between medium and small but the small fits very good. The speedrame pro fits a little big I think.

Try the medium. It will sink onto your head more.

Thanks man. Yes all the versions of the PRO have the magnet. It’s really worth it.

@@spicymountainbike Thanks for the reply. And you 100% have the best colorway! I don't like the new one's on the site with the small fox logo. I measured my head yesterday and it came to 21.5 inches. The small size of the Fox Speedframe Pro helmet measures 20.1 - 21.7 inches and the Medium measures 21.7 - 23.2 inches. Should I opt for the Small or the Medium? I will be buying the same colorway you have but I will have to purchase via eBay since it's discontinued everywhere else. Only bad thing is the seller doesn't accept returns so I'm taking a risk. Thanks in advance if you can give advice. I'm new to this biking thing and haven't had a helmet since I was much younger.

Yeah the other colors are ugly. That’s the only problem with the helmet. Go with the small size. Thanks dude!

@@spicymountainbike Thanks for the advice! Stay safe out there 👍🏾👍🏾👍🏾

@jeremyjackson8643 thanks man you as well 🙌

Yeah you gotta wiggle it a little bit!

I’ll make a video for you. I actually figured it out after a lot of suffering. It can a nightmare but I’ve gotten to where I can change it in 1 minute flat. Stay tuned for a video.

@@spicymountainbike thank you!

I agree!! Can’t beat MT7

Magura roil blood

I also have the raceline mt7. Love the neon color. I just need another frame to put them on. Yeah man the hc3 are amazing levers and they’ll last you a lifetime. For some reason I just keep going back to the hc levers.