วีดีโอ

What's up friend! I have a GE DRYER, and I think the previous owner had this DRYES change to 110V. 1) How can I check if this GE dryer is a 220v? 2)How can I swap it back to 220V? 3) Would you have a video showing how I can check all these information? 4) model is GE dryer Mod # GTDP301EL1WS SeR. # VV740839A TKX

Do you do just by yourself or you are two guys?

nice truck

This is good for a beater washing machine.

Thank you for this video. I have struggled with stretch wrap. Your technique makes is easy.

I just wanted an adapter, but this is so simple thank you!!

Do I need to use pads or can I just use the plastic wrap?? I’m moving everything myself so I feel confident I won’t carelessly get it dirty.. but I’ll be an easy sell on what’s best recommended

With it being white, shouldn't you shrink wrap then pad and shrink again so the pad don't bleed onto the white couch

Thank you for making this video!

he is fit and strong

What happened if for some reason you put the red one on the black spot??

Thank you very much

No boxes?

I have a question.my dryer is a 3 prong plug and my landlord bought a 4 prong plug to attach my 3 prong wires to the 4 prong plug. On my dryer is a green already connected but is it safe for him to attach the 3 wires to the 4 prong plug. Im not sure if im understood but im spooked because i dont want a fire. He actually spliced the wires and attached to the 4 prong plug. I wish i could post a picture. The top prong is green. But my cord has not color. Im kind of freaking is this safe

Thank you ! 2 years later and this is 100% helpful!!! Thank you!!!

Why does it be to be grounded twice

Love it man great work

I went from A GE profile to whirlpool cabrio platinum. However the 4 prong green cord does not reach the green screw on back . I have 2 whites in middle , black and red on side. But the green doesn’t reach . Can we move the green screw closer ? Or should I get a whirlpool cord that has circle hooks???

What about a 3 prong plug with the regular plugs 3 prong plugs that’s now installed in the newer homes like front load?

Hello! Do you have advice on how to wrap a large mirror- its about a 6 ft tall mirror 😅

Super nice Video,You are a best Boss👍👍……

What do you do if it’s the reverse way. 3 to a 4 into the wall

Bro you saved our life thanks a lot!!

I don't have a brass piece for the ground

Almost lost your feet there lol

Only provlem is not putting the bracket for strain releif is a code violation in most states. Don't post things and bot do it to code. Your video is dangerous and if your home burns up or the person who trusted you knew what you are doing, home burns, your negligence could cause fire claim to be denied. This also puts you liable for a potential lawsuit. Go buy another clamp or don't do the job

Do I have to have pads

I hope someone knowledgeable sees this and can help me... I bought an old dryer that originally had a 3 prong cord, the previous owners changed the cord to a 4 prong. I have a 3 prong outlet so I am changing it back to a 3 prong. Apparently they lost the ground tab used for the original 3 prong. What can I use to replace that little metal tab?? Any advice will help. Thank you

If you installed it with the bottom of the plug facing you, would it still work?

This made my back hurt 😂

Wowww!!!

Flat side DOWN on the screw bracket!

Thank you 🙏

As a 21yo female who didn’t grow up with someone who taught me ANYTHING about appliances/electricity/home maintenance, this helped me tremendously!! Thank you so so much!! 😊

This would be one of those times when seeing downvotes could possible be beneficial. So fucking stupid. I’m gonna try this tomorrow. I hope it’s right.

The front and back of the cable line up helped tremendously thank you 😊

if you ever have to do that again ditch the wood. just use the dolly and tilt it way back till the bottom of the washer is on the lip of the tailgate. that looked like a bit more of a struggle than it needed to be. just my 2 cents.

I need to know for this brand. I have a four prong. Red on red, white on yellow, black on black, green on green. Is that how it goes?

Thank you for such a helpful video, made it easier for me how to protect my couch while moving 🙏😇

This video is so helpful! If the ground wire bracket (brass piece) is not connected/ used, will it cause the dryer not to work?

Great view of the work being done!

I'm a professional mover. 17 years experience. This is how you wrap an expensive couch that cannot get dirty or damaged. If it's just a cheap or old couch, nothing expensive, you dont need the blankets or that much shrinkwrap. Start at the bottom and as you go, PULL TIGHT and go around to the top. I make sure the entire couch is covered in a layer of shrinkwrap so whenever possible, I can put the couch on its side to save space and it's not getting dirty. I do lay a blanket down before I place the couch on its side, just to make sure. If it's raining, I use some extra wrap to make sure the couch cannot get wet. Again, the method of wrapping in this video is only for expensive couches or of course if the customers requests it. BTW, be careful with how much time you spend wrapping. Some customers, if they are paying an hourly rate, will think you're overwrapping to run up the moving hours. Yes, some customers are clockwatchers and get nervous if they think you're taking too long to complete the move. Best way to avoid it is to wrap each item according to its condition and worth and do what's necessary but not overkill. If it's glass, bubblewrap it well, then a blanket, then place it in the truck in a way it cannot get damaged. China cabinets, curios, any large item with glass, there's no such thing as overkill IMHO.

Awesome job! Can we wrap furniture without pads if the furniture is just going into storage and can’t use rented pads? Of furniture goes in storage do you keep it wrapped or unwrapped?

How large are the pads?

Looks good. Always use the light side of the pad if available on all furniture. Fold them light side in, it keeps them clean. The only thing I would add is the bottom dust flaps of the couch should be folded up and secured as this will keep them from getting wrinkled.

Except when you're on a job you don't have time to wrap it like that. Way to much stretch wrap.

Why did you ground the neutral wire ??

Hey, man! Did you ever make that tool bag overview video?

Pianos are one of the heaviest things you can find in a house.

You wrap a couch to keep dirt out. You wrap a rug to keep the dirt in.