วีดีโอ

Thank you!!!

You talk like you're trying to make it take as long as possible. Then you skip the part where you compress the caliper.

Torque spec?

Thank you for taking the time to video your repair

hey bud this Is a awesome hack! haven't had to change my ink cartridge in a year!

Nice explanation...not wtf did you do?

Thank you so much for making this video because I've been fighting with this printer since I came to work today.

Thank you so much, you just saved me $$$ I bought the same o ring kit on Amazon for $15 and it worked on my 2014 infiniti qx60, thank you once again.

You saved my life. Thank you!

Great video thanks, it helped me out when replacing the carb on my Cub Cadet 1190H. Same engine and carb as mine. :) Also if anyone needs to know, the bolts for the carb have eTorx heads. I didn't have any eTorx sockets but a 4mm socket fit perfect and I was able to remove the bolts.

I'm in the process of restoring a MK6 Transit, but everything is missing. This helps me target the best installation to get and what it should look like.

thanks for making this video. i need to replace mine.

What kind of bold holds it, and where can I find it?!

thank you

My replacement did not have a hex on it to keep from spinning. But the back side fits a 19mm wrench to back you up and get it tight. Just in case anyone is in the same boat.

Next time you push the seat forward and then access it from the back . That way you don’t have to remove the complete seat

To get better access to the interior bolt and wiper linkage, stand the wipers up from the windshield and the plastic grill can be easily lifted 4 to 5 inches high to gain full access behind the firewall. No need to remove the wipers either.

Thank you.

Thank you!

For anyone else trying to make sense of this video… Once you remove the motor, you will need a torx 45, then you will need to spin the nut on the caliper clockwise until it stops, and then you will be able to compress the piston.

So helpful, thank you

Thank you!

Thank you, been trying to figure this one out for awhile

this helped me, thanks

need more details... C for effort

What size is that open ind wrench at 1:29? 17mm?

this saved me 45 minutes of dicking around, and losing a battle to a coat hanger. Thank you

I beat off to this like three times a week and I don’t know why?

Video would be awesome without background music.

Well I’m a single mom with 2 girls and we are going to attempt this job Saturday on my car 2011 Honda Fit Sport. I am sure that it’s the problem after watch this video. Is there anyway you can give me a list of tools I’ll need. I think I have everything but would like to be as sure as possible before I take my sole mode of transportation apart. Lol

Great work

Did you rebuild or replace for a new one?

I have a crack in the same place. I tried to think if I didn't have the correct antifreeze in it or just a bad design, bad plastic.

Will it cause the battery to go dead because sometimes when I turn my car off and still be flashing on and off

Change all three if them

Where can you get the diode from?

Do you need to do a front end alignment after this? Local shop wants to charge me $1000 to change mine, but if its this easy...

Where is the PVC check valve

Did you have to grease the joints?

Thanks it was a perfect vidéo.

What are the brake pads for rear ?? Part number?? Hard to find

THE BEST

Will this work on a different color CRV?

1/4 of a million miles and still running.😊

So this is the only what to replace it?

if you have to cut it and shape it then its the wrong part .

That’s why you don’t buy cheap parts

Concludes your video, and also the clunking

thanks

Thanks for the video. Do you remember how many miles you had on it at that time .