วีดีโอ

Hi Guy! This is super helpful, my washer looks just like yours. I’m looking to clean the white plastic bin starting at 12 minutes, but am not sure how the drain the water and rinse it out before putting the drum back in. How did you do it? Thanks I’m advance!

I tried all those and it’s still stuck

Why not just put some bleach on it.

God, I’m so sick of messing with this washer. I’m so tired of cleaning it and I’m not very handy, so I don’t think I can manage taking it apart. I clean it religiously. What is causing the corrosion on the wheel / arm? Is there a way to prevent it from reoccurring? Have you tried CLR? I’ve read that it’s an easy solution to run it through?

I'm losing my damn mind over this video it is so funny and helpful. I feel like I know exactly how to completely take my washing machine apart and put it back together and I have the engineering savvy of a 6 year old. Someone please PLEASE stop me 😂

just a question, why does the washing machine make a hum when it puts water in, is it because of the weak flow of water from the tap? Advance thanks for your answer😊😊😊hope u reply i really need to know plssss😣

Thanks! Some 20 year old CLR did the trick for me. That was so frustrating. Thanks for the tips! Now I'm back to look for how to take out the tub. It seems just as stuck, though it's currently soaking in CLR.

This video was a godsend. I tried WD40 and the thing still wouldn't budge. I noticed some of the other comments said to let the tub clean run with the bolt holding the plate either loose or removed. I kept it loose, ran s tub clean for about 10 minutes and after it drained the plate lifted right up. I think a loosening agent and letting it run a little was the trick.

Numerous cleaning cycles, CLR, WD-40, baking soda/vinegar, boiling water, compressed air, coat hangers and shoes strings to pull. Nothing will work. I'm going to buy a new washing plate bc I'll have to destroy this one to hopefully remove it. I'd order the win bags but I'm done spending time, money, and energy. Need to wash clothes.

How to prevent this from happening again

Thank you. This video helped us so much today! Random question - when we took out the entire drum we could hear water sloshing around inside the rim? Or maybe sloshing around inside the entire thing? Do you know what that is? Does that water cycle through and/or is there a sludgey inside that I missed cleaning?

My wash plate was stuck. I used gorilla brand duct tape across tge top, with enough slack in the center to slip my hand under. Lifted out easily.

Omg you are a god sent. 2 days trying to figure it out and a thousand videos.until I found this video. Thank you bruh lol

This is exactly what I was looking for. Started getting these flakes and didn’t realize how widespread the issue was. Thought I’d ruined the washer and would need to get a new one or pay for some repairs

I can’t even get the 🤬 bolt out

I still cannot get mine off!!!!

I am unable to remove the center bolt. I tried with 3/8" nut driver which is smaller for the bolt. Then I tried 7/16" which seems bigger. Which size am I suppose to use?

Still cannot get mine off

I quit

Method with CLR worked perfectly for me. Try it out!

Ah the missing 10mm socket 😂

Hey everyone for a longer video with detailed removal and re-assembly instructions watch: th-cam.com/video/aZHU325D3a4/w-d-xo.htmlsi=uE790PNFSqmC6a8L If your WASH PLATE is stuck please watch my other video with different methods to try and get it removed: th-cam.com/video/wtmy8cWjlXM/w-d-xo.htmlsi=Qhl8HT7R-7yynOWT Thanks! :)

Thanks for posting, but the 6 bolts on the wheel are hard to get off. I had to use a piece of pipe to gain more leverage, but if you have an impact drill like him, that should work best.

Great video, thanks very much! I soaked the bottom of the tub in vinegar, waited an hour - no luck. I then used 3 portions of a wire hangar with hooks bent into them and hooked into the three holes in the center. No luck. Ran a Tub Clean cycle. No luck. I decided to take a break, poured more vinegar in the tub and let it sit overnight. The next morning, it popped right off.

You saved me so much frustration, thank you!

Every single video “mine comes out easily” fuck all these vids 😂

Great video!! Do you know if that part would fit the WT7150CW? The part number I’m looking for is AGZ72909713

We followed your instructions on your you tube video and it was very helpful to get my washer taken apart to clean it. It definitely needed done. I am still getting brown flakes and junk in the water in the washer. I had watched your video and another video as well. The other video showed when you turn the wash plate over, to where the plastic side is, that there was some black spots inside the plastic part in the corners that could not be cleaned out because of not being able to take that plastic piece apart. Ours has some of the black residue inside that plastic piece as well. I have a feeling that is where the residue is coming from. I am going to order a wash plate but I cannot find the model number for my washer anywhere on my washer. From looking at your video yours looks like your washer might be the same as ours. Could you tell me where the model number is at on yours? I want to make sure I order the correct part. Thank you

my airbags won't go don't far enough. The video you linked is a different machine and doesn't even show how they did it.

Just what I needed! Thank you.

I wish I could figure out how to get that metal wheel at the bottom out (the hub). I have the right socket (38mm) but with the wheel turning it’s very tough to get enough force to turn it. Cleaned with a pressure washer and a brush within an inch of its life but still getting debris after cleaning cycle.

Notes to self: 2:31 Remove cap from agitator 3:54 Remove wash plate (10mm socket) 7:24 Top part of washer, screws (Phillips head) 8:17 Lift up top part of washer to access drum 9:23 Remove gasket (screws, latches) 10:57 Remove bolts from bottom of drum (10mm socket) 11:38 Remove drum 11:53 Cleaning bottom of machine 12:53 Process for cleaning drum 16:36 Putting the drum back in 19:26 Reinstall the gasket 20:56 Put top part back into place

May 2024 Ran across your 1st video. • Very helpful. • you asked for tip, 'a little less talk more Video'. • you helped me know what to Expect. > How do you get stuck plate out if stuck?

Where does the washer nut go on the bottom putting agitator in or on top with screw ?

Tried the mallet, boiling water, soaking in vinegar, wd40, hooks through the holes and it wouldn’t budge. Then ran a short cycle and in 5 minutes it floated right off! I’d advise to keep an eye on it so you can pause the cycle as soon as it comes off & remove it before the spin kicks in. Thanks for the great video!

Thank you. It’s just what I needed.

May I suggest method #8- no special tools or additives needed. Loosen the bolt on top of the wash plate just slightly but do NOT remove it. Then just put your machine in wash cycle. The strong back and forth movement of the wash plate will loosen it naturally. I used my machine for a few days in this way. Finally I removed the bolt for another wash cycle and as the water was filling up, the wash plate just floated right off.

I had to purchase a new agitator plate, previous one was stuck on there on big time. Cleaned it a few times but still getting debris

previous commentor. remove spider with 2 flat blade nail pullers or 2 claw hammers. remove agitator turn bolt out 3 turns and pry across bolt and and edge of hole. harbor freight cheap bearing puller for this and big nut. silacone grease all parts replaced.

air bags great idea.. hot water and soft hammer. tap 100 times. tap top and sides be patient. hooks great... screws and slide hammer.. put vaseline or silacone grease on all threads and binding surfaces for next time. my big fight was with the spider.

My pulsator/washplate is significantly stuck to the drive shaft!!! Can I use WD-40 or olive oil or similar to get it loose? I've tapped and pried... Obviously, I don't want to introduce clothes staining, but cannot get it out (without damaging the pulsator, I fear).

Mine would not budge. I poured one pot of boiling hot water, waited about 30 mins, then started a normal wash with hot water and about 3 minutes into the wash, it popped right out!!!

Ooo do the drain filter next!

These are a bane on washing machines as a whole!

I can’t get the 6 bolts out of the very bottom to pull the drum out! I’ve tried many different tools. Including socket wrench. Can’t get these things to budge!

Great video! Thanks for the help! Wish I could’ve seen how dirty it was originally and then get a satisfying after picture!😂

I had a similar issue and couldn't remove the plate. I tried several methods, including WD40 and pulling it with a wire inserted in the three holes, among others. Finally, I purchased CLR and poured it with hot water, letting it sit for 2 minutes. I attempted to pull the wash plate again, but it didn't budge. Then, I ran a short washing program to clear out the CLR, and within less than 2 minutes, the plate came off by itself! I believe the combination of efforts contributed to this result, but I trust that CLR worked in my case. Good luck to everyone facing the same problem. Moving forward, I plan to do a deep cleaning with 2 cups of washing soda and 2 cups of borax every 3 months. Hopefully, it will help keep it clean!

This video finally helped me get ours off. The WD40 + lightly tapping with a rubber mallet did it. I used some old weed Wacker string to route around the holes and pulled while lightly tapping.

IF YOUR WASHER HAS A SANITARY OR SANITIZE CYCLE USE IT TO UNSTICK THE WASH PLATE. I INTERRUPTED THE CYCLE AFTER ABOUT 1 1/2 HOURS JUST TO PEEK AND FOUND THAT THE WASH PLATE WAS FLOATING IN THE TUB( l had removed the center bolt/screw). You might have to let yours run the complete cycle. It’s definitely worth a try 😊

Great video. It helped tremendously 👍🏽