- 429
- 684 922
Qs Tech Service
United States
เข้าร่วมเมื่อ 18 ส.ค. 2013
I am a Specialist in game counsel repairs, Iphone/Macbook, repairs, PC/Laptop Repair, and iPhone repair.
I love to take on new challenges and explore new tech on the component level, So you don't have to. I strive to bring you the solutions to your tech related problems. I will show you what they don't want you to know.
Join me while we take on the unrepeatable and unexplained, and I will do my best to guide you through the simple repairs necessary to keep your product out of Land Fills.
I love to take on new challenges and explore new tech on the component level, So you don't have to. I strive to bring you the solutions to your tech related problems. I will show you what they don't want you to know.
Join me while we take on the unrepeatable and unexplained, and I will do my best to guide you through the simple repairs necessary to keep your product out of Land Fills.
9 cops The Most Slowest Cop Chase Racine Wi
9 cops The Most Slowest Cop Chase Racine Wi
#racine #racinewi
#racine #racinewi
มุมมอง: 40
วีดีโอ
Can We Save The PS5 ?
มุมมอง 8321 วันที่ผ่านมา
Can We Save The PS5 ? Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE #howtofix #repair #ps5 #fixps5
Heathkit IT 28 Capacitor Tester Part 1
มุมมอง 50หลายเดือนก่อน
Heathkit IT 28 Capacitor Tester Part 1 Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE #howtofix #fheathkit #heathkitit28 #capacitor
How To Fix Nintendo Switch
มุมมอง 45หลายเดือนก่อน
How To Fix Nintendo Switch Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE #howtofix #fix #nintendo #switch
Xbox X Kid Did A Good Job Removing Port Wow
มุมมอง 58หลายเดือนก่อน
Xbox X Kid Did A Good Job Removing Port Wow Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE
Seesii 11000mA-h Battery Spot Welder
มุมมอง 1.3Kหลายเดือนก่อน
Seesii 11000mA-h Battery Spot Welder www.amazon.com/Seesii-11000mA-h-Upgraded-Enhanced-Adjustable/dp/B0BJ6FRPKR #seesii #Spotwelder #diy #howto
Seesii Battery Spot Welder with 5.0Ah Battery Upgraded Handheld Mini Portable Spot Welder
มุมมอง 106หลายเดือนก่อน
Seesii Battery Spot Welder with 5.0Ah Battery Upgraded Handheld Mini Portable Spot Welder Were To Buy At amzn.to/4caDAUM #seesii #Spotwelder #diy #howto
Xbox Hissing At You Fix No Power
มุมมอง 91หลายเดือนก่อน
Xbox Hissing At You Fix No Power Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE
Nintendo switch fix
มุมมอง 832 หลายเดือนก่อน
Nintendo switch fix Stirri V2-TF Flux Link Were To Buy 10% off stirri.com/ Code QSTECHSERVICE
PLD-MSLED6: Microscope Ring Light A superior microscope ring light
มุมมอง 1312 หลายเดือนก่อน
PLD-MSLED6: Microscope Ring Light A superior microscope ring light Were You Can Get Ring Light At Here the Link pldaniels.com/shop/
HOWARD THE DUCK Save PS5 Shuts Off After 15 Minutes
มุมมอง 473 หลายเดือนก่อน
HOWARD THE DUCK Save PS5 Shuts Off After 15 Minutes
BK5490c Multimeter Software Developed By Paul Daniels
มุมมอง 6524 หลายเดือนก่อน
BK5490c Multimeter Software Developed By Paul Daniels
Xbox Series S - X HDMI Design Flaw Design Flaw
มุมมอง 2574 หลายเดือนก่อน
Xbox Series S - X HDMI Design Flaw Design Flaw
Nvidia Shield Pro 2015 No Power Red Hot APU
มุมมอง 825 หลายเดือนก่อน
Nvidia Shield Pro 2015 No Power Red Hot APU
How much do you charge to fix Xbox series s
depends on what’s wrong with it
@@QsTechService1 well it needs motherboard work
@@QsTechService1 is there any way I can send some pictures. If I can't pay for it can I get some advice
@@JacobSwanson-m2w you can send the pictures through Facebook business or Google business
@@QsTechService1 I posted on your post through the comment section
darn I wanted to build my house with it
Have you seen or heard a version of the 559 asm uv tpf? By the way, is it true that the original costs $85? What does uv mean?
On the website there are only versions v2 as asm
Yes, a reflow or reball apu video would be perfect
That is a cool reflow machine. Yes, I like to see it in action.
I had one where the whole heatsink was a dry spot. Looked like a big thumb print. Somehow I still manage to get it to spread. Although I had to do some freaky weird s*** bro.
liquid metal eat at the dye packet after time
Dats a big fat yes from me
I must say that was a weak vape 💨 hit my nerdy friend
Bought a used ps5 I need u to save mine man what would it cost me? Before it would let me play like 30mins on NBA 2K and shutoff. So I removed averything down to the heatsink to make sure there was no dust build up by power supply, cleaned off all dust, put everything back together and now as soon as i get into a game in 2K the fan goes wild spinning fast and shuts off . Even after just being on for 2 minutes.
Now thinking back i realized i installed the apu coolerplate ontop of the plastic piece lol , does the cooler plate go immediately on top of the apu and plastic ontop?
possible the liquid metal It’s not spread evenly and the APU
Ok are you still operating? I want to stop by tomorrow
Are these dead consoles able to boot into the startup troubleshooter without the NVMe?
No they Can't 😞
@@QsTechService1 lovely. And no way we can contact Xbox for a boot partition tool and key that is match with the motherboard?
@@HunteronaBudget as of right now I don’t know of anyway, but maybe in the future will be able to you can try contacting them, but I doubt it he would probably have to send it into them
@32:25 is the black coin size thing holding something yellow in it, near the white AC-in wire, a fuse?? It blew up in my xbox one x.
So no microphones in there or creepy cameras?
Puede funcionar la consola sin ese componente?
question, do you still fix backwards compatibility ps3’s? if so what would be the best way to get into contact with you. The issue i’m having with mine is that it isn’t displaying anything even after using multiple TV’s, used different cord’s, so i’m assuming it’s the chip just like the video you posted about the Ps3 you were working on.
Hey buddy by any chance does anyone know what Varistor i need to buy to replace rv001 ?
WHEN STORING keep the battery topped off!!! if it gets low it won't charge back up again. i'm make sure to charge mine ever few months or more.
Slow Boyz, slow boyz... Watcha gonna do... Watcha gonna do when AARP comes for you. 😂
Hmmmmmmm🚶🏼♂️🧎🏼♂️👨🦽👨🦼🐢🚓🚨🚓🚨🚓🚨🚓🚨🚓🚨🚓🚨🚓🚨
If i move the cpu chip and Memory to another board will i have all data like on the old board or should i move something more? My Nintendo switch is water damged it was completly in water Help me with infos pls Thank you
you have to hope that the CPU did not take a hit I usually takeoff four chips three chips that are bounded transplant to another motherboard the slim models normally have flex damage inside the board. They had to be transplanted more than others models
I've been trying to fix one like this for days, and this is the first video that also has that problem that the board has no markings lol I've been comparing other videos and hope you can help me find out what my problem is. I've already ordered a thermal camera to find the short but in the meantime I'm trying manually to find it
you can always try rubbing alcohol To find the short if you don’t have thermal camera
Great you note the values.. when I see a trend of failures and no donors to pull a value just see where it is connected if i chip pull data sheet look at examples circuits if they have them most mfg's use the the recommended circuits in their designs.
yeah, I just wish I could get my hands on this schematics for PS5 models
In my lifetime, I've never seen more ceramic capacitors fail than the SMD type. What I would see were fifty year old dried up electrolytic capacitors. It's not cheating to use every tool in the toolbox to quickly find the culprit. Good job. 🏆
It’s crazy how common it is on the PS5’s the capacitor is failing and all random spots sourcing part out from different vendors and one quality control
@@QsTechService1 All they have for quality control is a QC sticker 😂
i have one of these always use gear 8 press down on the probes hard as you can and close to one another as possible it will only do 0.15 thickness so if you take 2 0.15 tabs and weld together they will break apart easy its only meant to do right on the battery its self with 1 0.15 tab... also it has a major drain on the internal battery if you let it go 2 months it will be down 50% that controller board inside has a parasitic drain..it will damage the pouch lipo cells anything below 3 volts which is 0 bars so charge it up often or check it.. its really not that good also there is a problem the case is soooo close to the terminals that you plug it into so you can short it out a guy did a mod where he stopped that.. really if you do this alot you want the table top version this is just for once in a while and the wleds are not that strong if at all
I wish my IT28 was as tidy as that one.
bro, I purchased this because you had it you showed it off in a recent video look pretty awesome and accurate I can’t wait to see what you say about the rebuild of it because you know your stuff. Will do part two showing the cover off and the rebuilt but would like your thoughts on it for sure your professional
Looking forward to part II.
yes, definitely part two to have a look inside of the rebuild
@@QsTechService1 My current project is restoring my first TV. A 12" B&W Sears tube TV built in 1972. I've replaced all the electrolytic capacitors; all tested out of tolerance. Now testing each carbon composite resistor. So far 23 out of 25 are really out of tolerance (each one has been replaced). Example, a 100 ohm reading 322 ohms 😳 I have 75 more to test.
This meter looks like new.
pretty good condition I must say specially it’s fully refurnished will do part two video of taking it apart to look inside
pretty good condition I must say specially it’s fully refurnished will do part two video of taking it apart to look inside
Those focal eye tubes can be hard to find some types of then but there are newer versions available
That’s awesome to hear newer versions do you have link on those ? lol
@@QsTechService1 sadly I don't but I can ask the colleague I was discussing this with because they found them for vintage radio they needed it for.
6v6.Co.uk for UK BUT there are USA options also available. They will also help you source from that site.
Nice work. 🏆
thanks for watching
Do u buy switches. I have one with no dock and hori split pad pro and charger. Asking 100 bucks for it
Depends what’s wrong with it and the price What’s wrong with the unit?
@@QsTechService1 nothing wrong with it lol just wanna get rid of it
@@al-rawstarr1027 sorry I only fix broken devices lol best to sell it on the Interwebs
Congratulations, you saved the day. 🏆
i got a question tho, can i do this myself and can i do it without liquid and with naked eye?
I built a new battery set for my PLB using a similar welder. I did adjust the pulse time until the welds could not be broken but the strip would tear. Nice little device.
yeah, they’re pretty impressive failed a few years ago I think I have video on fixing it, but I had to fix it .. This brand-name so far is pretty decent It works good Can’t wait till you building a new E bike battery 🪫 My battery I built every cell was soldered with a big electric gauge wire I think I have video on that too also but yeah, pretty awesome little device powerful can’t go wrong with the charging bank too lol 😂
So are the tips not user replaceable in this unit? I had briefly looked at getting a spot welder for batteries but I would not use it enough.
@@GregM no Greg unfortunately they’re not. I don’t believe you had to replace the whole probes or disassemble the probes the other model they sent me has replaceable tips. That’s why I appointed it out in this model that you can’t replace the tips. Kind of a bummer just keeping honest review but Gray I would probably refer this one to It’s got some serious power I didn’t even up it I was at setting 3 and you can go to 8 lol
its xt90 bullet connectors minus the yellowq case just search for those then the wire 10 guage i think it is might be 8 guage then you can make some tips sorta like nails that you use to nail a 2x4 to a house frame you can solder some of those and grind down the tips alittle or leave em which ever works so yes.. but id keep the same lenth because of electrical amp losses this thing dumps about 250 amps or more at once.. really a capacitor style is far better than a lipo style capacitors charge up you can build one and they discharge instantly which is what you want the reason this is so slow and welds crappy is its not a capacitor type so your limited by how fast the lipos in side and thers 2 of them 5000 mah each that limist the amps apppplied to the probes so get a table top 110volt model they are far better far stronger or build a capacitor style.. just a regular old capacitor like for car audio with a arduino and a fast mosfet to dump all the current pleanty of youtuybe vids on it
I have something similar. I've rebuilt the battery pack for my Personal Location Beacon (PLB) for the boat as well as some electric tools. Nice tool, enjoy.
Nice work! Love saving the landfills. :)
thanks appreciate it
Thanks for the shout out re those squeeze bottles
Hell yeah bro that’s a game changer cleaning the tables and cleaning other components. Thank you very much appreciate it the other ones in the US way too expensive but you shared the link 🔗 appreciate it lots
My ps5 cuts off while I’m playing ncaa football 25is there a fix to that
I see Jiffy Pop electrolytic capacitors often in 40+ year old amateur and CB transceivers. Good job.
Magnífica reparación!!!! Felicidades amigo, es usted muy, muy hábil!!!. Tiene un 👍 y le envío un cordial saludo desde España.
What battery do you need for the kit ?
I've seen a video where a guy uses an M.2 cloner. As long as you can get the partitions it can seem to rebuild it. But there's a hidden partition which makes it linked to the hardware serials #'s.
Yes, I know that but the drive in this video was completely dead could not be read by any device therefore cannot get the partition off
@@QsTechService1 Do you need just the partition structure and it can rebuild itself? Or do you need the data as well? Mates Xbox is bricked and it's bad enough he's been unable to clone it.
@@Hunty49 yes if you do not have the partition to clone the drive does not work, the Xbox becomes a paper weight
Hi @QsTechService can you fix mine ?
yes, you’re welcome to send it in. You can contact me through Google business or Facebook business.
Hi, I got the same issue on my Shield and the same capacitor is involved. Do you remember (or noted) the capacitor reference ? Is it the 22µF you're talking about at 26:30 ? It seems to be the value of capacitors C507 & C514. Thanks for your video and your reply (I hope).
yes, 22 x 25 V also, you can leave the capacitor out of it if needed. If you can’t replace it .. don’t forget to hit that subscribe button
@@QsTechService1 And if I don't replace it I mustn't shunt it ? Because when I try without the cap I've no more the shortcut but shield didn't boot. I don't have the exact same motherboard version because I have 8 cap at this place instead of 4 on yours.
@@TheElkAiN must be a different issue with it but those capacitors sometimes they don’t even have them on some boards So that’s why I say they’re really not that critical like there’s not even four of them sometimes
I received one of these for Christmas in 1984. I loved it. I also had a set of Robotix that I used in conjunction with the Armatron. Good times.
That’s awesome. It’s a cool toy that’s for sure. It’s even fun to play with now lol
Awesome vids! My ps5 is overheating but the liquid metal isn't 2 bad,no dust around the psu anything else it could be?
The white stuff is from the Styrofoam packing. You really shouldn't move the arm by forcing it, the gears will break. Use the motors only. Have fun.
that makes sense with the Styrofoam yeah, I’m not trying to move the arm by itself it accidentally slipped lol 😂
Back in the Days 🤣 Yep, I spent many hours at my local Radio Shack looking at products to purchase when I saved enough up from my afternoon paper route. P-Box Kits were my favorite.
🎣🌮🎯👏🤣
How much do u charge for an Xbox controller stick drift
Unfortunately, I currently do not offer that service
Do you do repair and where can you been contacted too
yes, we repair them you can contact through Google business messenger or Facebook business messenger