วีดีโอ

Wrong! Velocity driven load development is a fail. Let the target tell you what is the best charge weight. Just use the OCW method and leave the chronograph at home. Once you have your optimum charge, then you can adjust the seating depth to improve the tightness of the groups, and you're done. Chasing velocity and SD/ES is not gonna get you the perfect load with the smallest groups possible under the widest range of conditions.

As well designed as it may be, for someone who loads multiple calibers, this machine is some kind of ridiculous joke.

I can see how the rapid and uncomplicated caliber change is going to be the number one selling point for this machine.

Couldn't you find any louder or more obnoxious music for this video?

Why not ship them in a divided box with a foam pad like ADG?

Hi Gavin. What name brand primers are you running in the X-10?

What am I doing wrong? This is the dirties machine I have ever used. I’ve been reloading since 14 years old. When I started with my father this particular progressive has a couple issues that I don’t know what I’m going to do. The priming system works great then all of a sudden after five or six shells they jam up. I’ve spent many hours adjusting getting everything perfect then they jam up again. I have been using this machine for about a week and had the machine break that bearing on the indexing arm so I had to wait and get a new indexing arm bearing again with primers jamming. The nut on the gear of the primer came loose and caused it to jam and break. I have spent many hours adjusting everything on that press to perfection with still having a primer issue. I cannot trust this machine because sometimes the primer isn’t even put in the case. That is the first issue. The second issue is with .223 Remington cases shaking powder all over the press. That’s the dirty part again I have adjusted everything to perfection but the cases shake as your index and I mean very dirty again I have adjusted everything perfectly. I go very slow it’s still shakes powder. I’m thinking that the buttons that hold the cases could be a touch bigger. Perhaps this would stop the shaking. If I could find the perfect O-ring to put over this button, that would be a good test perhaps you need to make a more specific button for each caliber shell I don’t know I’m just throwing that out there. I have never had problems like this with my Leemaster press. I hate to go back to just using that but I don’t know please help I really want this press to work.

Complete bs! You dont need to crimp 9mm. Roll crimp for revolver cartridges makes sense, but crimping a pistol cartridge exactly where its suppose to headspace is totally ludicrous.

I have one and it's a POS!

Thanks Gavin. Your instructions worked perfectly....

"...until you get the appropriate amount of swage. You should see a smooth rounded transition..." I guess that is the of the station and you clearly stated the goal--and I appreciate the close-up camera shots in cut the cutaway, but you didn't state the initial adjustment that should get us there not the mfr's intended penetration depth into the cartridge primer pocket by the swage pin. make it so the anvil just crosses the threshold and rounds the entry edge? Send it in the full depth of the "anvil" on top of the pin so that the entire pocket for that depth is uniform? (or, "don't do that because you'll have loose pockets.")? Swage the full depth of the pocket so there is no change in resistance? I also agree that showing the whole process may have had other benefits. It was in actually as you were doing a step in the indexing that the way Not to remove side covers was pointed out. You toward the end had a sort of an aside aobut it. You never know what tidbit you are gonna toss out there, and it is the tidbits that make your videos standout in value. 0 Thanks, G. m

Undeniably hilarious. Well done. I'll admit it was the title that got my attention though--having myself reloaded my way back to my own "center mass" on a sleepless night or two. You should make this a series. Product now has my attention, too, so well done.

Hey Gavin. for 223 and 308. do you think it would be possible to run a trimmer in Station 3 (sizing) like the Mark 7 Trimmer next to the FW dynamic hold down in the swaging station? Is there room? I'd run a Lyman M die in station 6. Also, with FL rifle dies I assume I should have the die just making contact with the shellplate, correct? I've seen some conflicting information on this.

I know this is old but are you saying you should or you need to use factory crimp die on 9mm or is the normal SEAT & CRIMP Die in a Lee 3 Die set ok?

I've used corn cob media for about 50 years - don't care for the dusty walnut media. Sometimes I dump a cap-full of Nu Finish in.

Finally some kick butt back ground music!!! Bang tango

and another footnote i only use the hornady power measure for rifle i use a chaap 20 dollar lee auto powder measure for pistol, awsome

fuck all that, my hornaday lock and load i can do any caliber change in under 3 minutes from large to small primers, if i dont have to change primer size the caliber change is seriously i can do it in about a little over a minute.

Beware! I’ve been trying to get a question answered as a person who has purchased an X-10 for three days and no one at Frankford is getting back to me despite leaving several messages requesting a call back and trying their electronic messaging system. Today no one is even answering the phone at Frankford inside business hours. I wish I could cancel my purchase. Makes me wonder if these folks have gone out of business.

What size are the primer tubes ? Will they work with the DAA Prima fill?

My favorite gear! 🔥

just bought the hand primer and the de primer. Never been so frustrated using the hand primer on my 45 colt brass. destroyed almost 20 primers out of 100 as they were going in canted. the shell holder seems very loose and allows brass to move all over. tried 3 different brass same thing on all 3 very dissapointed, how ever the deprimer is great, i may take this back to cabelas and see if its just mine or maybe buy another hornady which it took me ten years to wear out.

I just reloaded 40 Hodgson 223 cases 40 times. When I hit 20 reloads 20 cases had to be thrown out due to that ring near the bottom of the case plus with a screw driver I could feel a ridge inside the case. By 30 reloads another 10 more cases thrown out. Between 30 and 35 reloads 5 more cases thrown out but due to split necks. At 40 still have 5 cases good for reloading. Next I took 40 Lapua 223 cases and so far after 31 reloads not one case thrown out.

Green screen😂?

Gavin, is there something wrong with the Frankford X10? You haven't made any follow up videos in over a year. Please tell us what's hoing on. Thanks

That die is moving around a bit in that slide in groove. Does that matter with the crimp?

Setting my rifle rounds and it kept going from too long to to short in the most minute turns of the die. Kept measuring and measuring using cannelure bullets and finally without me realizing it was happening I saw the bullet move when measuring. All in the cannelure, which I’ve never had a problem with before. I could push and pull it in easily which made me realize I needed a crimping die. Is that all that does is crimp or is it a reloading station. Never mind I can look it up on the phone I hold🤦‍♂️

is there any issues with the priming system, i heard bad things about the priming. also what's your thought between this and Apex 10 ignoring price difference thanks

Maybe someone can comment on this, I usually don’t crimp but when I so ( I don’t have a crimp die) I will throw my sizing die back in the press, remove the decapping pin, and run the bullet up until a barely feel the case neck start engaging the die, when I pull it down there will be that same nice little shiny ring and a nice light crimp (I think) on the mouth of the brass. Am I wrong for doing this ?

You actually made us watch you crimp ALL your bullets. Is there a video length time that’s a required minimum?

Why not fully demo the process? Some people are visual learners just stating the steps in the manual is not very helpful.

Doe they send an install and training team with every purchase? I hope it's more reliable and not overpriced like their vibra-prime.

Just like brass, I too am easily agitated when I’m thrown in a drum with steel pins

I bought 2 hand primers that didn't work. Wish I bought the Frankford Arsenal first I've had no problems. Highly recommend.

If only they would do something about the drum, a rubber liner like the larger version of even mold in some ribs.

Never use an adjustable wrench

Why not use a medium to secure the cases so the dont dent?

when ya gotta stand on a chair to load a press thaats when i call it quits

Holy Rube Goldberg!!!

I was going to buy another brand progressive. Well I had not realized the smart engineering that went into this. As a design guy myself I was digging the balance not just in one area was it thought through but seems like 9 out of 10 areas. Well here comes the big test using it.

I just cut 6 pieces of plastic coat hangers (1/4" round) to lay in each crease of the jug. Will be hot gluing them in place right after I scratch the inside up real good. Then I will try adding layers of plasti-dip or some type of rubber coating for porches/decks. This should make the cases tumble quietly.

I'm surprised only 30 minutes of vibrating got them so clean. My vibrator takes about two hours, with new media (corncob) and Dillon Rapid Polish.

At a minimum, decap and swage before you tumble. If the brass is fairly clean (no mud or dirt caking), go ahead and full length size then clean to remove the sizing lubricant and pocket dirt.

My question was , do you need to crimp if you're shooting from a single shot rifle ?

Can you mount the powder measure in station 6?

Is there a way to easily empty the powder measure at the end of a loading session without losing the adjustments? It appears that you have to either remove the measure or the tool head to dump the powder.

I like Frankford Arsenal, have many of their products

Tumbling and then having to flip a case upside down is ok to remove steel pins if you are shooting 100-200 rounds. I reload 1000 at a time of 5.56, 308, 300 blackout and 6.5 creedmoor. I don’t have time to do that. Use a large ultrasonic cleaner after you have deprimed and then let dry and slap it in your progressive. Time is your most valuable asset, use it wisely.

I just took delivery of my x10 today. Midwest shooters just got a few in-stock. Yeah, these videos are going to be playing in reloaders' homes all across the nation. Lots of traffic inbound

hi and hmm, does even a small - .030? chamfer - (to make it easier to load) on a flat based bullet effect it