- 1
- 116 797
Banana Juice
เข้าร่วมเมื่อ 23 ธ.ค. 2013
High school project turned helpful
How to change a carburetor on a gy6 powered moped 50cc
In this video I am taking off the old carburetor and replacing it with a new performance carb.
After the video ends I went on a ride and it really does make more power and accelerates faster.
Carburetor that I used: amz.run/5eHw
After the video ends I went on a ride and it really does make more power and accelerates faster.
Carburetor that I used: amz.run/5eHw
มุมมอง: 116 818
Can I put a 160cc in a 49cc moped
If you are able to fabricate new frame mounts, I don't see why not.
Damn your house clamp trick put a hole in my hose.
I need to know about uptake an spacer please😊
I've done everything you demonstrated ten times. I've fixed scooters motorcycles and all. Wtching you do this was so satisfying. Sometimes you just want confirmation what you are doing is right. Somebody else demonstrated how the gas cap lid vent can be plugged stopping the gas from coming in. That was a new one on me. Thanks for the great video.
i plug the petcock valves suction side from the intake manifold and give it a gentle blow to stop gas from coming thru lol
i love this guy im so glad he showed everything step by step your a legend bro keep it up!!!
You had too reject that carburetor before you put that air filter
so, the bolts for my intake manifold arent long enough, what do i do??
I have never ran into that issue. You could see if you can swap out the studs to longer ones possibly. Are you positive that it is a gy6 motor? There are a couple that look similar but are different.
@@bananajuice125 I honestly have no clue what motor it is. I'm just trying trial and error
What brand and make of machine is it?
@@bananajuice125 Baja sc50
I'm not sure I can help you much on that. Everything I have searched suggests that it shouldn't be an issue. Best of luck!
Hi
Great video
I wish i have seen this video sooner
Excellent stuff Banana Juice. To the point and very well "illustrated". Could actually see what you were describing. Thanks!
Do you have to remove the old air box or keep it
The new carburetor comes with a filter that is much less restrictive. But if you would like you can still use the stock one, it should still hook up the same way.
This is literally the same model scooter and carb i bought, will be using this as a step by step
Happy to help! Best of luck!
Did it add any performance to the moped?
I bought the scooter with the stock filter and airbox which are very restrictive. I noticed a big difference in acceleration and top speed. The top speed is probably because I needed a new carb though.
You made a great video I like how close your camera shot saw thank you for doing this
Thank you! Happy to help!
ONE HANDED!
Good job kid I would use more plastic ties don't rely on them little wire clamps on your fuel lines and vacuum lines put plastic ties on I've been doing it for a long time working on them
I appreciate it! I havent had an issue yet but I will definitely switch them out when one fails!
This carburetor is junk . The spark plug junk too . Use better quality parts
This is a $30 carburetor. You cant really expect super quality parts. I put a new one on every year for the convenience of it. This video is just to show the installation of a new carb whatever kind someone orders.
The seat bucket is all you have to remove to do carb work. Clean carb and 85 to 90 jet. Where is the motor shroud for fan cooling? Don't you have a vac. Fuel peacock?
It was easier to remove what I did. I a shroud ordered but it had not come in yet. I have not put on a petcock but I plan on soon. Also, this is a cheap replacement for people to use as a convenience.
Thanks chief 💕💕💕
Happy to help ❤️
Nice job keep up the good work
Are 50cc and 150cc carbs the same or are they different?
They are different in a couple ways.
What’s that hose at the top of your engine ? The one not plugged into anything els
You just leave it in a spot where it can get clean air. All it needs is fresh air.
Did you end up doing a jetting video I'm interested in learning thanks btw
I have not yet, no
thanks, very well explained tuto, the best i saw
Would this fit A 50cc with dual hole manifold If so how do I can it to turn on with out the extra hoses and turn it to a singles hole one.
Doing a bit of googling, I do not think it would work
He put the intake tube spacer on upsidedown
Whoops
Yep & no fan shroud...the inverted spacer is a restriction flipping it will improve W.O.T. performance
Do I have to replace my carb with one made for a 50cc or can I use a bigger carb from a 125cc like a 22mm or 24mm carb? I have a gy6 49cc with 72cc bbk, aftermarket exhaust, 5gram variator rollers, orange cdi and coil, and maxing out at 41mph
Yes you can
New carb made all the difference, and the open air filter. Now running a 24mm carb and it climbs hills and accelerates exactly how I expected a 72cc kit to perform.
Did you have a flat air filter before getting a cone one? And if so is it better than the flat one
I bought the scooter with the stock filter and airbox which were very restricting. Can not confirm your situation.
Would that work on a ruckus
After some time on google, I dont think it will work on a Ruckus, it will most likely not fit
u can use a hammer or mallet to push that tube on
Nice little bike th-cam.com/video/Y-qS-y4Ok4Y/w-d-xo.html
Hi, Thee link is not working currently.. can you send me an other link to the carburetor born a similar one.. Can you send me the specifications so I may search the prizes and availability over here in the Netherlands.. Thank you in advance!!!
I have updated the link in the bio. Thank you for letting me know. I hope it can work for you.
May have been a good idea to adjust the mixture screw once the engine was warm good video.
Where is this located
Thank you for a very detailed video. So the extra holes next to the drip line and the drip line itself, it attaches to nothing?
You can attach it to something but it is not necessary
a rubber O ring sitting on a paper gasket seems a bit strange can guarantee its doing nothing would of made more sense to put the paper gasket on the flat side the o ring is surely there to but up against something
It butts up against the ridge of the o ring. not enough pressure to worry about any sealant.
How I did it was paper gasket to engine to plastic o ring facing up to the intake and it works Js
@user-yi2uv2rb7o it has that same on ring on the carb hose that's coming in. But the whole setup on this design sucks. There seems to b pressure there for me on mine. I keep cracking these dang plastic pieces
How much was the performance and speed increase
I still had the stock carb from 2005 on it so it was pretty significant for me. It isn't exactly a performance carb so don't expect to much.
What size is your filter
Can this carb go on a 2stroke 50 cc Venice or is there a different carb 2 stroke carb or something
It probably can but you would need to change the jets. I would just buy a carb that is suited for the motor to make it easier.
hello can you tall me plis what tipe of motor is it. 2t or 4t? tnx
4t
Well explained video step by step. Thank you for your time.
Great vid walked me right through…I put a racing Cdi…nubbi carb for my icebear trike…and unrestricted…it’s got wayyyy tooo much power but I love it
where did you buy it? Please I have a Icebear q6 50cc trike and it has trouble with a hill!
What about the big stock airbox hoses?
You remove it
Is there a needle restrictor under the brass cap at the top?
Yes it is
THANKS FOR SHARING. 👍
Bro in my country only the spare plug will cost you 3 dollars, don't ask about the price of a new carburator
I'm going to do this a icebear 150cc. Question will need to adjusted air/fuel screw and the idle? Also is it ok to mount fuel filer above the petcock with a shut off valve closer to tank.
You might need to adjust the screws depending on the air filter that you use. If you use the one that comes with it, you should be fine. As for the idle, it should be fine as it is as long as it will idle with the new carb. Just make sure that you order a 150cc carb as the one that is linked is for 50cc.
You guys will burn your motor up without a plastic cowling
Sorry, the cover for mine broke when I was riding so I was waiting for a new one. While the scooter had some downtime I decided to replace the carb. The tutorial is about the carb not the cooling shroud.
Does this work with a Yamaha bws 4 stroke ?
I am not really sure. It should be about the same process but the carburetor works with the GY6 motor which I don't think the Yamaha uses.
how much faster wuill the moped go with this carburator?
I still had the stock 17 year old carb on it, so the new one gave me faster acceleration and it was able to rev higher for more speed. Though I have not actually tested the actual numbers.