วีดีโอ

There was one time the pump did make an audible whine sound, right after i started my system up. I rebooted, went away. In normal operation with the pc at desk level right next to me its inaudible unless I'm 4k 120 gaming, then you hear the fans, but no whine i can pick out. Hope this helps. 😁

Yes, and yes. I honestly just use the gloves for the aesthetics and nothing else. In fact they make things way more difficult then they need to be. But I like the way they look in the videos.

White and red is my go to color combo. Black and red also looks good but I think its done too much. But thank you 😁

also please get a boom arm for your microphone, waving the mic around is distracting, changes the volume and direction of your voice all the time, and makes it even harder to hear you through the music

or even just use the mic stand that was surely included with the mic

Thank you! If you have a printer the files are available on printables for free. It a pretty quick and easy project.

Will do... I am working on a couple of upgrades.

I'm glad you liked the video, I wanted to do something that's different from the live-stream builds that are more common in the community. I've been meaning to upgrade to CAN for a while now, I am hoping to make an update video with a couple upgrades I am working on. Figure its probably for the best to get them all done at once.

Thanks for the feedback I really appreciate it. In all honesty, I did feel like my coverage of resin was lacking, I'll note that down for when I make an update video. Also, thanks for mentioning MicroCenter, there isn't one anywhere near where I live (yet) so I never really considered it as an option. Thank you for sharing that bit of information. It's hard to beat an ender at 99$ new. 😁

lol... Thank you, I am very happy it helped you out :)

Thank you

Thanks

😁

Thanks man 😁

Thank you!

I am happy to hear this, I did watch some of Hipyo's videos and when I looked up the keycaps he used my jaw dropped. I thought there would be more affordable "legit" sets, but the ones that where not unrealisticaly priced where so plain looking that I might as well have taken the keycaps from an old Dell keyboard and painted them. Still tho, I am glad I'm not the only one who feels this way.

Thank you so very much. I do enjoy trying new things, even tho it was stressful this was/is a fun project for me. I will come back in and attempt to fix the issues with it now that I have gotten some pointers from the community. 😁

@@MakerMilogood luck desoldering

The keys come out kinda rough on FDM printers. Resin printers tend to be much better in this regard but unfortunately I don't have one of those. I am playing around with the idea of attempting to do FDM keys but that is an entire project of its own.

Thank you for letting me know, especially about the plate. If you don't mind me asking. The plate goes between the switch and the PCB? Because this was something I considered doing I just wasn't confident in that decision. In the bottom section, we ended up changing a switch position in post and it got a little better. there is still some spacing around the space bar but at least is even.

@@MakerMilo You should imagine of the switches as a screw, they fix the PCB and the Plate, then when they are all put together it`s going to have an emphty space betheween the PCB and the Plate then you can put the rubber ring and is going to fix perfectly on the case

@@pedro54541 Thats what I was questioning in the process. I will de-solder the board and correct this. Thank you all for the help. I will do an update when I finish doing the corrections.

@@MakerMilo You put your stabilizers correctly, so you don't need to make adjustments on then.

@@pedro54541 Thanks, I apreciate the help. 😁

Thanks :)

Absolutely, It’s been on my list of videos to make. I’m a bit backlogged at the moment but do expect a full review in the coming months

Thank you

Yes the bearing is there to hold the hot iron, it works surprisingly well for that. It also has a pert for the brass brush to clean your iron, and room for multiple soldering tips. It is also highly customizable so you can essentially look for what you actually need. I got an insert to hold my flux syringe. There are also larger variants of this case that can also hold, alligator clips, and the AC adapter for the soldering iron.

That's a very good idea. If you go with the insert approach (like in the video) the level of utility would be very high. Multi-part prints are not a big deal for me, plus they look better than single print Items because you can play around with the color scheme a bit more. I am working on a fume extractor too. Hope to have that out soon, we will see.

@@MakerMilo DIY fume extractors are great I made my own with a old DELL 120mm FAN, its loud AF, but it can suck quite well, even at 60cm away it still sucks up all the smoke. [What I do sugest is to use a small switch to turn it on/OFF] and a barrel jack to power it. depending on how small you want it For filters I used 2 of those cheapo aliexpress carbon filters. and a 3+ layers of fan-grils, with a fine mesh one between the one at the front between the print/filters. Since I didn't care about looks i went FULL function over looks. making it easily modifiable. as it is made from 3 layers of parts. [with the filter case existing off 2 layers, and a FRONT panel layer for switches/other plugs]

@@darknessblades Sounds great! Have you published your build anywhere? I'd love to see it if possible. On mine, I am using a type-C connector to power it and a PWM controller to run the motor. It is working pretty well to push air but I don't know how effective it will be till it's done. For filter medium I got a carbon filter pad, I am hoping this will do the trick.

I really appreciate the feedback, I am very new to the recording and editing thing. I will work on that for the next one. Thank you

@@MakerMiloGood luck on your next video! This one was well filmed and crafted from what i could tell!

Yeah that was just to get a little B-Roll I am not actually using that cable for anything. Good eye though!

@themiloverse on discord

I cannot recommend it enough. Not to mention that if you are doing it from the get-go you are going to have a supper easy time with it. Best of luck and enjoy the build! 😁

I was just concerned (and still am) of someone hurting themselves while trying to “figure it out” and decided to air on the side of caution. But you’re completely right, I thought about taking out the bit in the video but decided it was probably for the best to leave it on.

You are very welcome. Glad it helped you out, and good luck on your build! PS: My friend has a Bamboo and those are pretty nice machines.

@@MakerMilo Ya know, when I started this, I didn't realize how much printing was required. This is kinda a slog lol.

@@21area21 It really is, I went with the “print it forward” program in the Voron discord and those guys are a mystery to me. My provider got my parts to me in 5 days flat from the time I put the order in. How? No idea, he had to reprint all the parts because I went with colors he had not pre-printed. That’s some black magic stuff. Oh and the parts flawless. I’ve spent countless hours tuning in my machine and still can’t get that level of quality consistently.

Yes that's correct... It uses an M3 Spring-nut and that section is just held with one M3 bolt.

@@MakerMilo thx!

Thank you! Thats the reason I’ve made these videos. I have 2 more (soon to be a third) videos that kind of go over tips before the build. Hope those help too.

Heck yeah, thank you!

😁@@mrbutchee1

That means a lot… I hope the video helps people in the areas that are not as strait forward or talked about. 😁

I got to be honest... I used a normal pi for this, so I am not familiar as to what the setup looks like for the BTT pi. If its anything like the normal one though you need to create an image of mainsail and put it in the sd card you'll use. If you got that that far then I can help you with the config stuff as it should be pretty much the same from there on.

I have a discord server up for the channel its not quite done yet but its functional, I can give it to you so that we can talk on there.