วีดีโอ

必須按讚 ❤

UP主一開始不就強調要極致的FPS跟最低的延遲 請問紋理過濾-質量為什麼又要選質量 這樣不就本末倒置了 雖說影響很小 但確實會降低一點效能吧

哥 在等您的win11設置😂

this guys posts on reddti claiming is the only way and his video is BULLLLSHTTTT

Would it be possible to do it in English? I would like to simply follow the video steps but unfortunately you can't understand anything. 😭

Bruh what are you watching? shit looks so sharp

有夠硬核WWW

For disabling the auto-dimming. I have a C3 so I had to enable the hidden menu and do the step mentioned. It works but then I can no longer control brightness from the standard menu and I have to play around with the advance menu and it doesn't seem to play well ... I've just reset it to standard ... disabled "eco mode" and set to PC / gaming mode and it's really not that bad ... I prefer that then having a static high brightness that is pretty annoying to change manually.

終於解決了撕裂問題

5:24 太专业了，成像工程师吗

感谢分享，但是抄作业后 虚拟机无法用了

太厉害了。讲解的很详细 全网第一

We recently purchased 3 LG OLED EVO G3s for the studio here and of course the auto dimming was a major problem as the monitors usually have still images in them So we wer so glad to find this Video - Thank You Neon Important to note - follow the steps exactly as shown in Neon's Video and it will work. DO NOT follow prompts on the screen. BUT as several people in the comments have pointed out - if you power off and power on again the monitors will come up in Engineering Mode DO NOT press exit or Green buttons 7 times this will do a factory reset and wipe out your changes Do NOT press INSTOP it will do the same Instead exit the way Neon showed us On Engineering Remote Press Exit (screen will go from White to Black) Press Menu and wait 30 seconds then on the Standard remote press Home button (Once the on screen mouse appears it's ready) I've tested this several times and it works - remember as Neon said - since you were in Engineering mode - the picture mode will be in Vivid - you will need to change this to you desired mode Happy Viewing

那我3A 只能跑60-70 fps 屏幕有240hz 是不是打開gsync 就行 不用鎖237幀跟不用開垂直同步的意思？

Following your advice, when you turn on the TV again, a window appears with information: Factory Mode Press INSTOP key to go to User mode. Press Green key 7 times to go to User mode (User Remote Control) What should I do to solve this problem? I don't want to see this information window.

非常有用，很感谢，只是垂直同步关闭后滑动网页的时候也会有撕裂感。

It's not clear what button you are pressing. After IN START you need to press P ONLY at the top left button at the top left of the remote. It did not ask me for the second password to enter Power Mode on my just-purchased LG CX55 2023. If was NOT easy to get out of the OLED menu and into the system 1 menu as there is no "accept these values" or "menu back" that's clear. WOW that was complex. LG can eat my balls for changing this setting and hiding that menu. They were just about to get a returned TV to Costco... Also, do NOT hit the IN STOP button ever. It immediately resets the TV to factory settings. And of course LGs servers are down so I could not set up my TV again. Ugh...

THANK YOU!!!

Thank for the video, I have a LG TV (55UR8050PSB). There is a satellite socket for connecting the TV to satellite dish/cable in the rear of it but in the tuning menu, I can only find DTV program search option. Is there any way to activate built-in satellite receiver on it?

It keeps reseting every time i start the computer. I can change the setting but everyime i turn the tv back on it stays in the service menu so I have to press the menu and wait 30 seconds before going back to user menu i have to repeat this every time i turn on the tv is there a way?

4080可以用吗？

Does this work with the latest "upgrade" to webos 23?

我按照影片設定完之後 觀看geforce experience或是Outplayed的錄影會一直卡頓 還原初始設定之後就沒事了。 想問會是哪一個設定有影響呢?還是只能一個一個試? 版本551.86還有前兩個的版本都試過了 顯卡2080

这个是4090专用的优化还是通用的呀？

Thank you God!!!!!

不使用更高級的EVF是有原因的，你去查規格表，Nikon Z9原廠電池續航力只能拍700張出頭的照片數量，而EVF是比LCD更耗電的，雖然更優秀的EVF帶來的感受更好，但也更耗電，到時候就拍不到600張續航力了。而且如今各家廠商製造無反，其實都還在電力技術突破中，像SONY是直接放棄掙扎了，每出新一代機身就更耗電、續航力更差，把電力問題丟給消費者自己去解決，這是一個時代的背景，也許將來能解決電力問題，也許不能。總之Z9能做到別像SONY一開機，僅僅只是操作選單就瘋狂掉電力%數，已經很感恩了，如今的無反功能太多，用個SONY光是學習選單還要看電力1%1%的掉，心理壓力實在太大，Z9至少能做到讓人好好操作選單，很不錯了。

great vid thanks! edit - this doesn't work. All settings are gone (including initial TV setup) after each reboot.

系统 控制面板的电源设置要改成高性能吗。

how to save after reboot?

Worked on my LG C3, but now everytime you turn on the TV it starts up in Factory Mode and Dimming on the HDMI input is turned back on. The OLED adjustments are still there but Dimming turns back on the HDMI input. IN STOP will reset the TV to Factory settings and delete ALL your apps and adjustments. Hitting the GREEN key on the factory remote yielded no result for me. You can hit HOME on the original remote and it will take you to your home screen. and work normally, but you are still in SERVICE mode. Contemplating just resetting and forgetting the adjustments.

Im noticing the flags in your service menu. The same flags my CX had after a main board replacement when the factory white balance/calibration was lost, and i had to calibrate the TV on my own dime, as LG doesn't, or didn't seem to think calibration was necessary. The TV did indeed perform worse than it did with the original SoC. So if this procedure is doing the same thing, and causing the same flags, than thats kinda important to inform people of. This very well could potentially ruin your warranty. The webOS 23 update hit my C2 the other day. I went ahead with the update, and now lost access to TPC and GSR without a work around like this, one that i will not do. I'm curious what happens when you have TPC/GSR disabled and update to webOS 23... Do those settings stay off, or are they reset with the update. Truthfully, I can't remember if I had it enabled or disabled. I will say tho, having it enabled didnt bother or distract me nearly as much as my CX did. The CX would dim terribly during those long dark HDR scenes. The C2 just never did it aggressively to the point it bothered or distracted me. I did have TPC/GSR disabled majority of the time, but I'd often turn it back on, just to see if I'd notice... and i truly never could as long as logo luminance adjust was disabled.

希望可以有個繁體對照 .

7:56🎉

2:09 you dont explain how to shift the menu focus back to the middle menu.

看来之前2018年佳能曾在ces上亮相的超一亿像素的工业级别全画幅传感器并不是毫无用处😂😂😂。按照这个理论目前索尼的6千万像素的传感器实际只有两千万😂😂😂

經過各個測試最強的還是sony的雙層cmos，目前各家也是都用sony當手機主攝

why would anybody buy this dumb tv i want a good image not this crap oh and by the way you are eliminating youre warranty

For those having problems with turning off the TV resetting everything, just select "Screen Off" from settings and disable auto turn-off.

十分感谢了！！ 用了现在windows下生产力窗口不在是一卡一卡的了

请问，Z8和Z9，能支持Angelbird的AV PRO的4TB type B卡吗？我查不到。谢谢😋

请问，Z9和Z8支持的CFB卡的最大容量是多少？谢谢。我在Nikon网站上只找到了最大1330G。当然，Nikon网站上只是举例。是Nikon自己测试过的。

Is it possible to reset the adjustment settings? I tried pressing the Instop button, it did reset everything except for the adjustment settings.

爬了許多文 抄了許多配置 你的教程是最有用 最有感的 !

只想说it男就是不懂什么叫流量！这么高质量的，5个月了才1万多播放，白瞎了，，，

Unsubscribed

I've tried this three times now, got stuck in the menu & had to reinstall to register from factory settings twice & of course put back all my apps! I'm very disappointed, particularly because I was already upset with the various screen settings & was looking for that magic fix? Don't even get me started on the ugly Dolby Vision UHD on Netflix! 4K eh, come back HD all is forgiven...

請問開Gsync要在遊戲裡降三偵那不開Gsync要怎麼設置?

有沒有繁體對照

讲的非常严谨，大赞，希望能出一期关于fovoen x3的

thank you good sir! worked perfectly!