วีดีโอ

Thanks brother 🤘🙏🤘

🤘🤘

Hi bro, I built the frame accordingly and I had to hire someone else to install the glass window between the live room and control room since each glass weighs 120kg :)

Hi bro, it doesn't vibrate. I applied silicone between the metal frames touching the ground and the concrete, including the ceiling :)

Thanks. Yup I drilled the floor and ceiling to mount the metal studs brother.

@@brandongomez2925 I'm not sure that will work where I'm building. I think I'll have to put in a subfloor and screw the studs to that. Thanks for answering though! Your studio looks great.

Hi! the total cost came up to 10 grand Malaysian Ringgit. The live room is approximately 500 sqft, while the control room is around 192 sqft. The gap between the concrete and the new ceiling is about 1.5 feet, with the untreated distance from the ground to the concrete ceiling is 12 feet :)

Hi bro, yup it's non adhesive. I'm using 8mm laminate flooring :)

Hi bro, I picked up my materials at a nearby dealership. You can find the list of materials I used in the description :)

Hi bro, yup, I went ahead and drilled holes into the walls and the ceiling. This was to insert the wall plugs and screws which would secure the frame. I wouldn't really recommend using alternatives like glue. If you ever decide to take it down in the future, all you need to do is remove the screws and wall plugs, then do a bit of plastering and painting, It will look just fine. As for the partition, I used a 12mm plasterboard with 60 grams of rockwool placed on it. I made sure to leave a one-foot gap between the two partition boards. A 6 inch gap would also do if you dont have enough space. It's important to ensure that the partition is securely attached to both the walls and the floor. I used a 1-inch thick plywood for the large tempered glass and as for the door I used a timber door frame. Just make sure that the frames are fastened well to the floor and the ceiling bro :)

Jerry, thank you very much brother!! 🙏

Hi Prod. Subbi, that material I used is a sound insulation foam :)

Thanks Tayfun. For the flooring I only used a Pe foam below the laminate. I don't have much issues sound leaking from the floor. There's no tenant below me and the sound can't hear from outside the building as well. There's a walkway around the studio so the sound gets trap in between the studio walls and windows.

Hi D.M.H Productions Studio, Here's the size of the rooms below :) Live room = 27f X 22f Control room = 16f X 11f