วีดีโอ

Have you tried the steps mentioned in this video? I think Cammus have hardware level dfu mode so you should be able to put it in dfu mode and flash it manually using these steps, unless they used software level dfu which you override by wrong bootloader. Join in cammus discord or forum to discuss further. If you can reach its uart then maybe we can find a solution.

@@fk_tech I didn't try it yet but I prefer to fix my Cammus software if possible. I think it should be possible to reinstall the driver in device manager after the device is put into DFU mode if I can find the right driver file. I am a little worried about messing things up further though. If I reboot the wheel when in DFU mode will it return to normal mode? I am on the Cammus discord and I didn't see any answer for this but I can ask the question there too.

Cammus Discord discord.gg/G23jJsHN

Thanks. I will try these during the weekend session and give you a shoutout ;) LFM have changed the track to Barcelona to qualify for the License

I have not been following up on what have changed on the new bootloader of the android version. This is very difficult to maintain when vendors keep changing bootloader function while I have also moved to mainline uboot for amlogic devices. Maybe you can post on manjaro forum.

5nm base while 6-7nm peak. For me even 4nm is very high power hahaha. I use it at 80% power on cammus app and 75% on Assetto Corsa Competizione game. Wheel is very good for the performance while Paddle shifters are tiny so I replaced with 3d printer ones and since then it have been amazing. I case you're looking to buy one, they have 15% off until 7th oct while you can use "fktech" to get 5% extra off so total 20% off

No. Its soft brick. They have dfu mode so you can always re-flash.

Good Luck.

Hey, Finally someone noticed hahaha. Details can be found here www.fkardame.com/2023/11/07/113/

Manjaro Plasma edition with Steam UI

How can i get this ?

Its not public yet but you can get it by manually installing the available packages

Yes. I have that planned but I am waiting for a replacement paddle so I can switch the left one. All together.

It was fine cause I can't use c5 on 100% its very strong for my hands. I use it at 80% on cammus app plus 75% in game. Overall it was fine but yes it was shaking during heavy turns. You can checkout my videos which this stand and c5.

For this you will need to add that usb port to be on during sleep.

@@fk_tech on bios or how i try almost everythink i cant get it to Work

Are you using it over Bluetooth or usb dongle? With Bluetooth it should work out of the box.

I'm glad you like it. Thank you

You're welcome! Hope this video helped you fix it.

By default they had red elastomers installed. I thought red is more stronger so i changed it to black and do far using 50kg load i am enjoying it but I should try with red ones to understand the difference

Please update to the latest version of the application. In windows 11 there was some permission issue where it would not save the config ton device firmware. Also yes you need to restart the pedal controller to take effect.

@@fk_tech uygulamayı nasıl güncelleyeceğim win 11 kullanıyorum ve sizin videodaki uygulama bende mevcut.Win 11 problemı nasıl çözebilirim,Win 11 hangi izni vermem gerekiyor?

Download the latest version of the application from the new link. Remove the old version first. No permission needed. It should work with new version of the application.

I used it from Arduino forum. And added calibration to it. Let me find it for you.

Yes I am documenting the tools and planning to do a step by step guide on how-to soon. Plus it is under heavy development so I am also testing things for the developer and getting more features added.

@@fk_tech Thank You Sir ;)

No worries. So everything is fine. I have calibrated it correctly

No worries. So everything is fine. I have calibrated it correctly

Thanks for posting it here also. Will try to follow these points.

I started gameplay recording on this channel to showcase the power of minipc. First Instarted with Amd Ryzen 5800H which was vega igpu and now the 780m and 890m is almost as powerful as a midrange dedicated gpu.

@@fk_tech how do you keep it from over heating I hear these things while great they end up over heating after a while cause the task can be demanding I’m thinking of getting a air jet mini pc idk yet cause I would love to play no hesi I just can’t be bothered to build a huge rig

I don't do anything for the cooling. I have it stock and it can stay cool on it's own. You can check my post here th-cam.com/users/postUgkxN8mqVeQ76scjcsPv4QS5KEzr5PlLRnKl The mini pc is above the TV and it stays cool even after 2 hours or sim racing. I have done more than 1 hour of no hesi on the same setup and the fan is not loud at all.

@@fk_tech wow that looks amazing! Whole set up is sweet I might end up getting one of these things eventually

I have been playing games on minis forum um790-pro without any external gpu. You can check all my previous gaming videos where the total tdp is under 70w that means igpu is used from um790pro. I have not played rally game on it but i know 780m can handle wrc10 which I play on my OrangePi neo device which have 780m igpu. You can buy um790pro under you budget. If you like Linux then you can buy the one with Manjaro Linux pre installed. All the heavy games can be played on low-medium mix graphical setting at 1080p resolution only. Please don't expect it to do high graphical preset.

Beelink Ser7 can make it but don't buy ser6 as 6800u/hs with 680m igpu have stability issue. I have gtr7 and that too have some stability issue as it would randomly reboot at times. Never faced issue with minis forum um790pro in that regard.

It happens only on cold boot, once you press all the pedals once then it will settle down.

Which version are you using?

Which version are you using?

@@fk_tech i sloved the problem. Only Change in the config data CN to EN. That it.

A new version is released so the crash is fixed and new support is added.

This bug is fixed in new version.

Well every customer will have different point of view. Maybe for you 4g is not needed nor controllers but gpd is known for such devices. Maybe they can have different series of hardware in future which can cater to your expectations?

On windows you do not have to setup it up everytime. It gets saved in the epprom/firmware of the controller. They are releasing a new software for the pedals and I will do a detailed video on that maybe next week once they release it.

@@fk_tech Hi I have downloaded the new software at it doesnt upload the changes done

Yes there is a bug in the software. They have updated the software and I have still not tested it yet.

Sure. Let me schedule it for coming weekend. Thanks for the feedback

Yes it does work with c12, the same driver have support for c12. I should recieve my C12 soon to demo in in new videos

@Vincentb63fr I know why you cannot use it in Am2. There are 2 reasons. 1. Sdl2 doesn't have c12 added in older releases, it have in new release which is already in arch linux now. 2. You need to make the game aware that c12 is a steering wheel. I will do a video tutorial maybe tomorrow or day after.

Sure, sadly shorts uploaded using phones doesn't really get to edit description. Thanks for the response. I will do a video on crewchief on Linux of that helps ?

Thanks.

You're welcome to join simracing community on matrix app. Where we discuss simracing on Linux. #simracer:matrix.org

Your next best friend will be 'gamescope'.

You can launch it from lutris. It should work fine using ge-proton-8.22 above. CSP should work too using lutris.

You can use the Manjaro Edition of UM79-pro, it will have linux already installed. Why you need Bios details? store.minisforum.com/products/minisforum-um790-pro?variant=44359316766965

This one was $30 free shipping.

I am trying to get more users for sim racing community in Linux so we can add more device support

@@fk_techcan i run a Simucube Wheelbase on Linux?

Which model? github.com/JacKeTUs/linux-steering-wheels Simucube have silver rating. Check if your model have linux drivers.

@@fk_tech i have the Pro Base!

Simucube Pro 2 works with Silver rating.

Yes fixed. But are you using Linux and launching game from proton ? Which wheel is used ?

Well the image was a proof of concept and not a stable release for end users to use it. Well the new images will be stable releases and will not break on updates.

Manjaro Gaming edition Yes.

@@fk_tech where can i download it? Manjaro's official website don't have it.

Currently it is only available on gpd win max2 device install. Soon it will be made public.

That's the plan!

It was recorded at 1080p and upscaled to 4k. Idk why you're saying its 360p. Maybe you have slow internet connection.

Did you configure the controls in the game ? 1. Look for configuration in ETS2 Setting > Controls. 2. Add all the controllers in the Controls and assign the ACC, Brakes, Clutch, Steering and gears. For more details connect with simracing matrix channel. #simracer:matrix.org

@@fk_tech I took another look at the force feedback. And there was a catch. Hook gone and I hear nothing more about it. Then keep looking....anywhere is still a problem..... Ok, i'll do that.... In any case, I already drive about 35 km/h..... a beginning...

It's a prototype and I am one of the tester for it.

Its a prototype. I am one of the tester for it.

cammus-ff driver which I have on my github. Thanks to Jacketus work on simagic driver.

Cammus C5 Driver github.com/spikerguy/cammus-ff Also posted pkg on Arch user repo. aur.archlinux.org/packages/cammus-ff-dkms Which OS are you doing to use ?

Thank you 👍

Yes, steam and wake up works similarly.

Forza horizon 5 works out of the box. Force feedback for g920 works out of the box too, but forza the game itself restricts wheel drivers so if you're using a different wheel then maybe sure forza supports that wheel. I am using Manjaro Linux for all the gaming videos I have done in this channel. You can check them out. You can also try Manjaro Linux on your pc and test the games.

Um790 was being sold with manjaro pre installed but it's out of stock on their website. Everything works out of the box plus 6.9 kernel have good improvement on gpu and usb4 support

@@fk_techthanks mate! Gonna check it out soon.

It is in stock again.

store.minisforum.com/products/minisforum-um790-pro?variant=44359316766965

@@fk_tech thank you! Mine is on the way already.