Clinch River Homestead
Clinch River Homestead
  • 72
  • 142 955
Weeping Spring-Cover up- Branson 5520 BL200 *Spectra hv101 level*
Hello all today i am tackling the next issue and that is a weeping spring about 20 ft from the back door. My plan is to cover with rock and then get some dirt and cover over it. Not sure if it will work but ill see. I am taking most of the rock from a foundation wall that used to support a barn over 100 years old. I take a closer look at the spectra hv101 and make sure that the pad for our shed if level .Then i gotta get the branson 5520 out to fill in some holes in the front that i made the day before. Please leave a like and make sure to subscribe thanks for watching!
Follow us on our adventure/journey from maryland to tennesse on our 15 acre property.
We have lots of inventions for the farm such as water transportation , 3d printed items , chicken coop builds and much much more.
มุมมอง: 136

วีดีโอ

More backhoe work on the homestead! Repair grease fittings NO GREASE *ALL BRANSON OWNERS CHECK*
มุมมอง 4262 ปีที่แล้ว
Hello everyone today we are doing some more work around the homestead . Need to dig out some stumps and also finish clearing our fence line in the back of the yard area. While doing the grease on the tractor i remembered an issue i had with the grease fittings on the backhoe and i was not getting any grease to the moving parts due to the zerk fitting was grinding into the link pin that runs ins...
20Tons of ROCK for the Branson 5520! Some grading using the Spectra level! Garage is coming next!
มุมมอง 1012 ปีที่แล้ว
Today we are receiving 20 tons of rock to make a garage /shed pad for a 12x28 garage/garden shed. We are putting the branson 5520 to the test again and doing some grading and also using the electronic level system to get everything just right. We should be moving in very soon we both cannot wait. Thank you everyone for following us on our journey much much more to come ! Please leave a like and...
Branson backhoe *BH200* Telephone pole removal! More cleanup on the homestead its Soo muddy.
มุมมอง 5252 ปีที่แล้ว
Today we test out the branson backhoe (bh200) on some telephone poles that were used as fence post on the homestead. After that we have some more clearing near the back of the property and its my birthday so we went out Thanks to my amazing Wife Nicole Thank you Love! please like and sub to the channel and thanks for watching! Follow us on our adventure/journey from maryland to tennesse on our ...
Branson tractor 5520**Titan Grapple** Moving some BIG Logs *House Update* -Farm Life-
มุมมอง 1.9K2 ปีที่แล้ว
hello everyone hope you are well today we take a ride to our new property that we have been working on to clear so when we finally get to move in we don't have to do this. We also have to areal shots of the property now so you can see what we have been doing from the air. I also put the Branson Tractor (5520) to the test with some very heavy logs we had cut down the prior day . We are using the...
Homestead Build site before the work starts! Homestead life
มุมมอง 1712 ปีที่แล้ว
In this video we tour the property before they start work on the site. We have some good high up shots so hope you enjoy the video. Any questions please post them below also like and subscribe to the channel thanks for watching . Follow us on our adventure/journey from maryland to tennesse on our 15 acre property. We have lots of inventions for the farm such as water transportation , 3d printed...
Home building in 2021 High Prices got ya down? Check out our prefab/ modular Home, Clayton homes!
มุมมอง 1672 ปีที่แล้ว
Hello everyone in this video we discuss the high prices of home building in 2021 and our journey in building our home using clayton homes as the builder. So far so good and we worked out the issues that we talk about at the end of the video. If you are looking into building a home consider a prefab home or modular home because the cost is lower and the homes are built inside protecting them fro...
Branson 5520 Fuel tank LOOSE !! Fuel tank bolts get replaced and more grease fittings found 50hr srv
มุมมอง 5703 ปีที่แล้ว
Today I replace the fuel tank nuts that came loose and 1 missing on our new Branson 5520 and same as 5220. I also found 2 other grease fittings on the back while I was under the tractor to replace the nuts on the fuel tank. These fittings are necessary when doing a 50 hour service so don't forget them. Also a shout out to Hank at Hamiltonville Farm for the info on the rear grease fitting on his...
New TRACTOR 50hr Service! New Branson 5520c & 5220c at home 50hr service tutorial video!!
มุมมอง 5K3 ปีที่แล้ว
THIS IS A LONG VIDEO AND DETAILED ON THIS SERVICE AND MANY TIPS INSERTED THROUGHOUT So its time for our new Branson 5520 tractor 50 hour service that we are going to do at home (also the same as the Branson 5220) to save money on our homestead and you should also to save on your farm or homestead. This is a long tutorial video going through each part of the 50 hour service on the tractor explai...
ALL Drone Pilots! Dont fly until the test! FAA "TRUST" certification test. Real time walk through!
มุมมอง 1813 ปีที่แล้ว
New FAA TRUST drone pilot test for all commercial and recreational drone pilots for all drones DJI , Autel Evo, Fimi drones, Holy stone drones and may others. If you bought a drone for your homestead, farm or just for some backyard fun to get great shots then you need to watch this! This is a Free test that can be taken at multiple websites and they are listed on the www.faa.gov/uas/recreationa...
How we Save THOUSANDS NEVER buying BAGGED mulch again! Buy smart on your FARM, Homestead or GARDEN!
มุมมอง 1523 ปีที่แล้ว
In this video we explain our reasons for not buying bagged mulch again. At the 4:26 mark i show you the differance between both bulk and bags as well as how much you can save. Anyone starting a garden on you land need mulch as it is a very good ground cover that also will decompose and fertilize the ground as well and you get a 2 fold benefit. The cost savings can be very substacial exp if you ...
Polaris Ranger Bed Attachment! Never before seen attachment for every farm or homestead! This is Big
มุมมอง 2253 ปีที่แล้ว
If you have a Polaris ranger utv then this is for you. I created a rear attachment that goes in the holes around the bed of the ranger. We have a country way water container that we use to water our orchard/garden daily and the carry strap for the hose broke on the country way 40 gallon water container thus leaving the hose to willy nilly float around in the back, and as we drive the container ...
How to ADjust the Top LINK! 3 Point Hitch on your Tractor! What to do with 3 HOLES! Lets Take a look
มุมมอง 26K3 ปีที่แล้ว
In this how to video with a little physics behind the 3 point hitch on the back of your tractor. I explain what the top link is and how it is used and more important how to adjust for your needs.This applies for most all tractors with a three point hitch and brands such as Kubota, Branson, Kioti, Mahindra, John deer, tym and the list goes on. If you live on a farm or homestead this info is gold...
Top 3 Must have Tractor IMPLEMENTS for your Farm or Homestead! TOP Tractor Attachments!
มุมมอง 9363 ปีที่แล้ว
This is my top 3 tractor implements everyone should have on a homestead or farm. These are not in any order but I think they all compete for the number 1 spot. I feel that these are the most used tractor attachments that I have on our homestead. What are your favorite implements ? Post down in the comments! Have you bought your first tractor a Mahindra, Branson, Kubota, Kioti, or Tym and many m...
Unboxing Review CHEAP Chinese Softbox PhotOgraphy LIGHT Kit! Andoer Softbox LED VIDEO light kit!
มุมมอง 8K3 ปีที่แล้ว
In this video we unbox and an depth review of the Andoer Softbox Photography Lighting Kit also the Neewer softbox photography lighting kit and many others are the same. I was not able to find a review on this kit to display the lighting in the room before and after as well as ISO camera settings before and after so i made this to show you how much of a difference it can make. This cheap Chinese...
KILL WEEDS Not your Plants! Crazy GooD Weed Killing HACK thats basically FREE! At 1:15 mark
มุมมอง 563 ปีที่แล้ว
KILL WEEDS Not your Plants! Crazy GooD Weed Killing HACK thats basically FREE! At 1:15 mark
Cheap Deck! Cub Cadet Zt2 and Cub Cadet ZT1 DEck SpinDle/Blade Replacement How To! Zero Turn mower
มุมมอง 5K3 ปีที่แล้ว
Cheap Deck! Cub Cadet Zt2 and Cub Cadet ZT1 DEck SpinDle/Blade Replacement How To! Zero Turn mower
Thousands of StrawBerries! GARDENing at HOME and SAVE! StrawberrY Patch Creation!
มุมมอง 343 ปีที่แล้ว
Thousands of StrawBerries! GARDENing at HOME and SAVE! StrawberrY Patch Creation!
Hill-Side GARDENING Tips & tricks, Gardening for Beginners! Save TIME & MONEY Next level gardening!
มุมมอง 833 ปีที่แล้ว
Hill-Side GARDENING Tips & tricks, Gardening for Beginners! Save TIME & MONEY Next level gardening!
Cub Cadet Zt2 and Cub Cadet ZT1 Mower BLADE replacement How To! This is CRAZY? Hit a STUMP!
มุมมอง 3K3 ปีที่แล้ว
Cub Cadet Zt2 and Cub Cadet ZT1 Mower BLADE replacement How To! This is CRAZY? Hit a STUMP!
Autel Evo2 BRICKED? Open box review of my new discontinued Autel Evo ii DRONE by Autel Robotics!!
มุมมอง 8843 ปีที่แล้ว
Autel Evo2 BRICKED? Open box review of my new discontinued Autel Evo ii DRONE by Autel Robotics!!
Digging Drainage trench between rain storms! Blocked Drain AGAIN! Save the Orchard!
มุมมอง 513 ปีที่แล้ว
Digging Drainage trench between rain storms! Blocked Drain AGAIN! Save the Orchard!
The MOST Boring Video We made So far lol !
มุมมอง 333 ปีที่แล้ว
The MOST Boring Video We made So far lol !
3d Printed CHICKEN Feeders & 3d Printed Chicken tractor Adj WHEELS! MUST have on FARM or HOMESTEAD!
มุมมอง 8403 ปีที่แล้ว
3d Printed CHICKEN Feeders & 3d Printed Chicken tractor Adj WHEELS! MUST have on FARM or HOMESTEAD!
MINI Rescue Farm . All Animals GREAT and small AMAZING!
มุมมอง 9303 ปีที่แล้ว
MINI Rescue Farm . All Animals GREAT and small AMAZING!
Rural Internet options! UnLimited T-mobile 5g gateway BEST option? Gaming MSFS2020 on 5g?
มุมมอง 3K3 ปีที่แล้ว
Rural Internet options! UnLimited T-mobile 5g gateway BEST option? Gaming MSFS2020 on 5g?
Trailer video
มุมมอง 1673 ปีที่แล้ว
Trailer video
Homestead name Change! Another trip to the nursery!
มุมมอง 543 ปีที่แล้ว
Homestead name Change! Another trip to the nursery!
POLE Saw Maintenance on the homestead. Tree trimming along the driveway.
มุมมอง 463 ปีที่แล้ว
POLE Saw Maintenance on the homestead. Tree trimming along the driveway.
Bush Hog (Brush hog) clearing land stuck in the Mud with New Branson 5520 Now what?
มุมมอง 4293 ปีที่แล้ว
Bush Hog (Brush hog) clearing land stuck in the Mud with New Branson 5520 Now what?

ความคิดเห็น

  • @Osmani-10
    @Osmani-10 12 วันที่ผ่านมา

    Hi, would you recommend it now still after some years have passed?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 12 วันที่ผ่านมา

      I still use them today on my other channel .

  • @bikesbullets9080
    @bikesbullets9080 หลายเดือนก่อน

    AWESOME video of this Backhoe in action! Nice tractor!! This video deserves WAY MORE views!

  • @dingleburry7919
    @dingleburry7919 หลายเดือนก่อน

    Wouldnt it make more sense to use the holes to make the toplink as parallel as possible to the lift arms, so you implement travels without tilting forwards or backwards through its motion? Then use the toplink length to adjust tilt? Itll keep same tilt through whole lift/lower, IF toplink is parallel to lift arms.

  • @brianbrink1421
    @brianbrink1421 หลายเดือนก่อน

    Great video. I just picked up a 2024 zt2 50”. I really love it. I was hoping to see how u change out ur hydro fluid and filter.

  • @LeslieSquire
    @LeslieSquire หลายเดือนก่อน

    Car ramp on the discharge side is easier.

  • @landking3742
    @landking3742 หลายเดือนก่อน

    2 questions: Did you check to see if you bent your blade? How often are you going to grease the spindle?

  • @amyallen9021
    @amyallen9021 2 หลายเดือนก่อน

    I have a 3032 E John Deer I use it mainly for my arena drag for a horse arena. I have no knowledge of the proper way the 3 point hitch should work and just learned about the three holes.. Thank you! Now to my question .... The toppling twists, my arena drag is a lot lower in the back than I remember it to be. The area of the top point seems too long but I do not know if shortening the top point will fix the low tilt of my arena drag. PLEASE HELP :)

  • @Robert-bg2nm
    @Robert-bg2nm 2 หลายเดือนก่อน

    What did you hit?......a tree stump?......lol......blame the operator not the machine!

  • @briantodd2376
    @briantodd2376 4 หลายเดือนก่อน

    Dude that’s a 12” wide rear tire. How wide did you want?

  • @alittlelessdumber2587
    @alittlelessdumber2587 5 หลายเดือนก่อน

    This is a good refresher video because I don’t often add/remove my BH200 on my TYM 3620.

  • @fatima.zhakup4147
    @fatima.zhakup4147 6 หลายเดือนก่อน

    Thanks for the video!

  • @MegaShahla
    @MegaShahla 7 หลายเดือนก่อน

    So loved your video! Very fun! I would love to print the baby chick feeder with the spinning top!

  • @JesseKlaus
    @JesseKlaus 7 หลายเดือนก่อน

    I am considering, very soon, buying a 4820. If anyone knows of any compelling reason not to, please, please let me know.

  • @MadZprod23
    @MadZprod23 8 หลายเดือนก่อน

    Great review thank you. I managed to bag these at £40 second hand still boxed. For what I need them for I’m sure they will be spot on if they are anything like the quality in this review.

  • @scottjefferson6984
    @scottjefferson6984 8 หลายเดือนก่อน

    I have a 5520R that has 300 hours on it. On mine you do not need to take off the air cleaner housing - just unsnap the 3 cover clips and you can pull the air filters out to blow them clean and wipe out the interior. I suspect the same condition exists for your tractor. I have never seen anyone put oil in an oil filter before installing and I don't do it either. Just oil on the gasket before installing. The Branson dealer parts guy said I could change the transmission filter without draining the hydraulic oil at 50 hours (he said that is what the dealer does). I tried that - big mistake. With the backhoe frame (on mine) the transmission filter access is tight and you get bathed in the oil trying to swap the filter. Just drain and change the hydraulic fluid like the manual says is what I learned!

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 8 หลายเดือนก่อน

      Great tip on the hydraulics I haven't don't mine yet it's been sitting . I'll be doing that soon Thanks for the comment .

  • @Rcmellophotography
    @Rcmellophotography 8 หลายเดือนก่อน

    Couldn’t you just get better stands? This is a decent barren for what i need. I got remote LED 65W color lights for it.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 8 หลายเดือนก่อน

      Yes you can . I am still using the original stands for a small studio now and they are fine .

  • @carltrano1325
    @carltrano1325 9 หลายเดือนก่อน

    How do you like the Branson?

  • @TheVideocreations
    @TheVideocreations 10 หลายเดือนก่อน

    Excellent, Excellent. You did a great job, and it is easy to understand you. I look forward to watching more of your video. 3 thumbs up to you young man. great job. Thank you de garth

  • @jimrowe7519
    @jimrowe7519 10 หลายเดือนก่อน

    Thank you for sharing. I found the video without using the softbox kit to be the most pleasing. The lighting and skin tone looked great without using the softbox kit, and looked bleached at all settings when the softbox kit was used.

    • @cjporter3747
      @cjporter3747 10 หลายเดือนก่อน

      It's because of the camera settings. Realistically, you would use an iso of 200-400 depending on the camera.

    • @jimrowe7519
      @jimrowe7519 10 หลายเดือนก่อน

      Thank you. @@cjporter3747

  • @stephengraber4015
    @stephengraber4015 11 หลายเดือนก่อน

    Your advice is exactly opposite of what Tractor Mike says in his video. He says the top two holes are for implements that need downward pressure- box blades, plow etc. The bottom hole is the least aggresive and is used where down pressure isn't required, like for brush hogs and mowers that are supported by the bottom links and their rear wheel. WTF?????

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 11 หลายเดือนก่อน

      Well I guess tractor Mike is wrong about this one here is a link you can read up on it www.messicks.com/school/what-adjustments-can-you-make-to-your-three-p

  • @rwarren2007
    @rwarren2007 ปีที่แล้ว

    Great review. Thanks! I ordered this kit regardless of the poor reviews because it is affordable (i.e., cheap). Now I know precisely what to expect and so will not be at all disappointed as I set it up.

  • @BankonJovan
    @BankonJovan ปีที่แล้ว

    Very descriptive thanks!

  • @802louis
    @802louis ปีที่แล้ว

    Thinking of buying how was yours going?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      It's been great about 130 hours on it now.

    • @jasonburress8201
      @jasonburress8201 6 หลายเดือนก่อน

      Thinking of buying one how is yours still going

  • @swearnest72
    @swearnest72 ปีที่แล้ว

    I notice your ZT2 has the star pattern on spindles, mine is the S shaped. I want to swap out to the star pattern. Does the ZT1 and ZT2 interchange?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      Not sure about the spindles you would need to replace all 3 of them and blades I would get 1 from Amazon and try it if it works order the other2 if not send it back.

  • @HarryMcKinney4
    @HarryMcKinney4 ปีที่แล้ว

    The very best video on this! Exactly what I was looking for! Thanks!

  • @jimpowell9205
    @jimpowell9205 ปีที่แล้ว

    Where did you buy your tractor?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      American outdoor equipment in Tennessee. See Hershel he's awesome 👌

    • @jimpowell9205
      @jimpowell9205 ปีที่แล้ว

      Darn, that’s a drive from Rutledge.

  • @omegafortnite7337
    @omegafortnite7337 ปีที่แล้ว

    I have a zt1 do you have a part #

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      No i don't I just went to Amazon and typed in cubcadet zt2 deck spindle

  • @arhon888
    @arhon888 ปีที่แล้ว

    Thanks for sharing. Is it possible to assign one remote for each, so they can be controlled individually (I would assume so, given that they supply 3)?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      Unfortunately I haven't found a way to isolate the remotes to 1 lamp 😕

  • @bernardhfox
    @bernardhfox ปีที่แล้ว

    RC Aircraft has been flying freely for over 70 years. Governments are over stepping. And people are bending overr and grabbing their ankles for a corrupt communistic system. Why? Fear. REALLY! F the FAA and its over reaching money grabbers!

  • @cavyboy99
    @cavyboy99 ปีที่แล้ว

    Cub cadets blades are so horrible. I wish I can find a different brand to use

  • @ownjam
    @ownjam ปีที่แล้ว

    The reason i'm here is because I was looking to see if I could add my own zert fitting Because my spindle is freezing it's only the beginning of the 3rd season.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      No I don't think you can

    • @ownjam
      @ownjam ปีที่แล้ว

      @@ClinchRiverHomestead Oh you can absolutely do it and I kept my old one and I'm gonna? Try. It on that one and you gotta pop out the Piece of plastic that's covering the bearings inside because they're shield as well but anything can be taken apart and put back together

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      @ownjam oh ok I didn't even look at the original all that well since it was broken . Needless to say I stock 2 spindles now just in case .lol

    • @ownjam
      @ownjam ปีที่แล้ว

      @@ClinchRiverHomestead I Just paid For One from mahondra A hundred and twenty five and they charge me for the bolts four dollars a piece

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      @@ownjam that's ridiculous.

  • @ownjam
    @ownjam ปีที่แล้ว

    They should have came with zert fittings in the 1st place. It's just another way for big corporations to rob everybody legally God God forbid. I go still a candy bar.

  • @Thetankguy308
    @Thetankguy308 ปีที่แล้ว

    How's the zt2 60 holding up? I'm thinking of ordering one myself.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      Still running great I did replace the rear tires with something a little more beafy to handle hills and boy now it will climb over anything .

    • @Thetankguy308
      @Thetankguy308 ปีที่แล้ว

      Ok great..I'm looking at a spartan as well..they are a little more expensive and john deere is way more expensive

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      John Deere is way overpriced not to mention. They're one of the companies that are trying to keep the public from being able to repair their own equipment. Check out the right to repair bill.. So for that reason I probably wouldn't ever get John Deere.

  • @johnniejackson3182
    @johnniejackson3182 ปีที่แล้ว

    Did you have to adjust the tension on your belt?

  • @janemartin5402
    @janemartin5402 ปีที่แล้ว

    What about the center hole…

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      That is a neutral point. So if you are using the box blade and don't want it to dig down to deep then use the center hole. Thanks for the comment 👍

  • @MickLuton-le8se
    @MickLuton-le8se ปีที่แล้ว

    Apparentl they put the bearings in without removing the covers so the grease will not get into the bearing. The bearings needs to be removed and caps taken off

  • @johnnysancheese4727
    @johnnysancheese4727 ปีที่แล้ว

    How many hours does your 5520 have on it now? Any problems? I am contemplating on getting this tractor! What did you pay for it? Thanks Clinch River Homestead! 👍

  • @barrymiller9876
    @barrymiller9876 ปีที่แล้ว

    you need a beehive.

  • @BruceFinley-cb8nc
    @BruceFinley-cb8nc ปีที่แล้ว

    good video but too damn long

  • @Haywire1979
    @Haywire1979 ปีที่แล้ว

    Off the wall question, but I just bought this same tractor “used” w/ 60 hrs and I love it. Been using the backhoe for the past month so didn’t know it (took it for granted) but the top link didn’t come with it. What’s the stroke on yours, extended & collapsed?

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      I am not really sure . On ths size you may be able to call the dealer and they can get you 1 or ths size. My tractor is not near my home or I would check .

  • @Rj12922
    @Rj12922 ปีที่แล้ว

    Video is long but really appreciate how detailed you are so that explains the video length very informative and helpful video bruh🔥

  • @larrylass4268
    @larrylass4268 ปีที่แล้ว

    Amazon after market spindle used a bushing that needs to be greased. Cub Cadet used a sealed baring so no greasing necessary.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      Yes that's what I got I actually have 2 on hand now just in case lol.

    • @larrylass4268
      @larrylass4268 ปีที่แล้ว

      @@ClinchRiverHomestead That will guarantee you will never break it again.😀

  • @ninjalightning2631
    @ninjalightning2631 ปีที่แล้ว

    I am very hard to give thumbs up but dude you are awesome ! I was just about to order 1 of this lights i came a cross to your video Thanks

  • @jeeprocks86
    @jeeprocks86 ปีที่แล้ว

    Thanks for sharing. I’ve got a 3620h with a BH250 on the way. Very informative.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead ปีที่แล้ว

      Hey thanks for the comment you will love the backhoe. Once you connect and disconnect a couple times it goes pretty fast . I love my mine and use it a lot .

  • @gowenrv3762
    @gowenrv3762 2 ปีที่แล้ว

    I'm sorry,,,, I missed your dam problem. Was there something wrong with the tractor? I am looking to purchased this in close future.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 2 ปีที่แล้ว

      Thanks for the comment ... the dam issue is at the 5 min mark. Nothing wrong with the tractor still going strong its a great tractor without all the bells and whistles. Love the backhoe it's well worth it . We use it all the time .

  • @valev.design
    @valev.design 2 ปีที่แล้ว

    That LED light can be disassembled in case it burns or breaks?

  • @robertpluszczynski4383
    @robertpluszczynski4383 2 ปีที่แล้ว

    Thanks for the vid, I have a 4820R and totally brain farted on how to install the backhoe.

  • @joeproffitt5908
    @joeproffitt5908 2 ปีที่แล้ว

    Great video. Very helpful. Just purchased this tractor for my farm in NW Fl.

  • @mikecentex
    @mikecentex 2 ปีที่แล้ว

    I know it took a lot of effort to make this video, but as a 5520H owner with a backhoe, I really appreciate it as its been quite helpful with my new tractor. Thanks!

  • @stonehorn4641
    @stonehorn4641 2 ปีที่แล้ว

    I completely disagree abput pallet forks. They are absolutely great to have, but personally, my homestead is 130 acres of mostly hardwood. The grapple is priceless, especially with my sawmill.

    • @ClinchRiverHomestead
      @ClinchRiverHomestead 2 ปีที่แล้ว

      Everyone has specific needs and the grapple is great but I find myself going for the forks before the grapple they each have their own pros and cons. Someone on a budget the forks can get you pretty far . For a saw mill where you need more precision of placing logs yes the grapple is probably best. For a more all around tool the forks are a great choice as you can do a lot more with them that a grapple can't do. Thanks for the comment