วีดีโอ

2024! Thank you getting this replaced to pass down to my son.

I have a 2013 Malibu that uses the same switch. Saw another video saying you need to remove the airbag and steering wheel so I tried this repair figuring nothing to lose (no way I was taking my steering wheel off). Had the whole switch swapped out and working in less than 30 minutes. What a huge help!!! THANK YOU

Great video!

Putting the new gas pedal in only worked on mine for about three months then I had the same problem again turning the car on it wouldn’t start turning it again and starting in low power mode set up throttle body gasket replace gasket say oh now you have to replace the throttlebody it’s just one problem after the other with this car

2012 Chevy cruze the stabali trak will come on for anything. I hit the brakes hard one day and the wrench was on ..another time it was raining hard it came on. Both times it went out and never came back on

dealer recalled these for 10 years or 150k miles.

0:23

uhmm

So whe. Thos happened with your were you able to drive with those lights in?? Mine is a 2012 6 speed manual and has.same lights one with brake light and when brake light comes on you can start to drive it and all os fine than all of a sudden it act like someone is pulling up on the ebrake and dies right down, if you shut it off open close door and start back up you go drive again for a little ways and does it again.

I just replaced the one in my daughter's 2013 Cruze. The part cost me $26 on Amazon and about 15 minutes of my time. Took it for a test drive after and the blinker returns back after making the right and left turns. Saved myself a good amount of money. Thank you for the video. I did see the other video where he talks about disconnecting the air bag, what???? Once again thank you.

Just happened to my 2018 cruze, shitty

My gmc 1500 2013 is doing the same thing right now

Great job a d easy explanation

Thank you so much.

Was the car going over 3k rpm’s? In park my car will idle to 3k but in drive I’m not getting no reaction out of the gas peddle ?

What’s the part number

Thank you for making this video. This happened to me today.

After replacing still does not work now what

You think that might be the reason it accelerates on its own?

Thank you for this video Austin, visiting my daughter in Florida and their Chevy needed the indicator replaced.

Plz help me guys my Chev cruze over heated.I took it for repairs the changed the top gasket and took the cylinder to the engineers and it was fine.I drove it for about 8 months after it was fixed then then engine sound changed as if its a diesel.I took it for repairs again he took the cylinder head to the engineers and he put it back the sound was fine.Now the vehicle does not have power it wasnt uphill.What might be the problem plz help guys

My 2015 Cruze threw this code last week. It went out the next day and is driving fine at the moment. I'm afraid it's going to repeat.

Changed one on a Chevy Cobalt once, this looks easier than the Cobalt.. thanks for the video!

First person to show all the same codes my daughters car received, through "on star", after she received the limp mode error. Her code pointed to the throttle body as an possibility, "98%" of the time. Other vids also give throttle body as the reason.. so, I'm going to clean it and use ohm meter to check the circuits. on the peddle sensor..

Great video! I'm having the same problem and was sure I'd have to take the car to the dealership to get the turn signal repaired. I'm a DIY kinda guy. So, this simple repair video will come in quite handy. Thanks! (BTW, although the Cruze is considered to be a "throw-away car," I've really like it. I've done most every repair myself. With lots of TLC, I'm up to 208415 miles and still going strong. (Oh, and you're right. That plastic coolant valve is worthless! I changed mine to the metal version.)

Maybe you can help me, I have a couple turning signals out I’ve replaced the bulbs they still aren’t working. Do you think it could need a fuse replaced?

Thank you for the video! I just put one in. Less than 10 minutes I had the new one in. Thanks to you!!

So the motor mount needs to come off to replace the belt, but the part that breaks maybe twice in the car's lifetime can be done in 2 minutes with 1 socket. I hate working on this car. Very helpful video!

The link doesn’t work

Thanks

GM is junk they even stop the Camaro again and now this weak pedal that can't even take a size 11 shoe to the metal never again will I buy their products Toyota all the way from now on

Great video this will help me alot that you bro

Same thing is happening to me and it happened on my way to work. The car drives super slow like 2 MPH and I don't know what to do!!!

my daughters 2015 has same issue, did you experience any power loss or shaking while driving or did you just get the lights and warnings?

Do you know if I replace it, will my blinker stay off when not on. To be more specific when I have my blinker on and then make my turn it always turns on my right blinker and I have to give it a little tap downward to turn it off

Good job it really made it easy as soon as I seen it

Thank you for sharing really helped

I was getting stabilitrack and other electronic(radio/display reboot) issues while driving a 14-15' cruze. Nothing like taking a turn and losing electric power steering in the f*ckin middle of it. If it was acting up it sometimes wouldn't let me take the key out or crank the car afterwards. Wiggling battery connections clued me in to where the issue was centered around. Checked service bulletins and it turned out that during manufacture there was a lot of them that had an improperly crimped negative battery cable. Took the printed service bulletin to the stealership and had them do it before I did it myself. They were trying to charge for it and diagnostics and stuff when I already did that for them. Keep in mind when electronics are having intermittent issues while driving a car, it could be a spotty ground.

Where did you get the pedal?

Thank you for the instruction!

Chevy Cars Have so Many problems

When I am accelerating Cruze 2013 above 60 it's dropping the speed UpTo '0'.... Exactly don't know what's the problem....some one is saying, needs to change spark plugs, gear oil..... One mechanic told gear box needs to be repair or fix... Could you help me please....

I have this same issue with my Chevy Cruze .. but it's ONLY when I use my cruise control . The cruise control will work but it inevitably causes these issues after a lil while , and it seems like it happens during acceleration . Anybody have any idea why that is ?

How do you turn off the trouble code after replacing the pedal?. Because it is still showing the engine reducing.

Did you car have miss fire mine has same lights on and shakes when I stop at stop lights

I am ordering my part right now. I have replaced all the spark plugs and the coil pack and its still doing the same thing. I will keep you posted on the outcome. Thank you again!

Be better to reprogram by scan tool after repai. Welcome to the cruze

i remember replacing so much on my car for this problem (g6). i replaced the pedal, spark plugs, other plugs i can't remember, the gasket leaking oil maybe thought it was the problem, the map sensor, the throttle body, the TCM, 2 wheel sensors and the catalytic converter . it was the catalytic converter that ultimately got rid of it lol smh. and i was desperate to avoid replacing the wires. traction control was throwing so many codes. just putting this out there for others looking.

Exactly what I needed to know thanks dude👍

I've heard that that problem also happens when it's really cold outside!