วีดีโอ

Glad it was helpful and thank you for watching!

Hi! Yes, it shouldn't be an issue, I've printed on Canon Magnetic Photo paper which is 600 g/m2. You can check my video on DIY Magnetic Bookmarks.

Oh, that's great! Good luck in your creative journey :)

Hi, there're a "borderless printing" option in the print menu, it is however not available for certain formats. Also something to keep in mind - this will enlarge your image to fill the whole page and as a consequence cut off the borders.

oh I can totally relate! I was also confused, I've ordered these on Amazon and by the time I was editing this video one of the products was already available under a different label.

thank you so much for watching and glad you enjoyed it!

Thank you dear! That’s so nice of you 🥰

I'm using Canon Pixma IP8750, I've filmed a review video on that - you can check it out :)

I'm cutting my stickers using Cricut Maker, I've made a couple of videos about that, check it out :)

Hi! I'm normally using Canon Colour matching, also when printing from Photoshop, I'm letting the printer manage the colours without further adjustments and have been happy with the results so far. Let me know if this answered your question :)

@@KariArtspace Thank you so much! I ask you because I'd like to buy this Canon printer, but for exemple with my actual Canon, colors are not so brilliant, so I was curious if there is a setting to make the colors more beautiful. Thank you!

@@KariArtspace Do you use a special setting instead on Photoshop/Illustrator o not?

Just the basics really, I'm always choosing high quality as opposed to medium or low, besides you might also try choosing the glossy photo paper as media type even when printing on matte, this way the printer will deposit more ink and the colours would seem brighter. In addition, make sure your artwork is in CMYK as opposed to RGB colour mode. Are the colours unsatisfactory when printing on matte paper or glossy as well?

@@KariArtspace I usually use matte paper and not the glossy one, so I don't know. Anyway, thanks for your help, I will try to "play" with the setting.

Hi! Nope, I haven't.

Thank you so much for watching! 🥰

Hi! Thanks for your comment :) Printable vinyl is made from polymer-based materials that are waterproof. In contrast, sticker paper is usually made from glossy paper, vellum, and white polypropylene, but it can also be made of polyester or vinyl. So these can be used interchangeably if made from the same material, I guess.

Thanks a lot, glad you enjoyed it!

Hi, thanks for your comment! Do you mean if the Cricut is worth buying when you're planning to make 100 sheets per day? If so, I would really consider outsourcing the sticker making, as it can be quite costly and time consuming.

Thank you for watching! 💕 The inks I'm using are the original Canon cartridges: 551 Cyan, 551 Magenta, 551 Yellow, 551 Grey, 551 Black, 550 Pigment Black. I get them from the local shop, which unfortunately doesn't offer global shipping. So I assume it would be worth checking on Amazon or your local platform :)

thanks a lot, that's a good tip :)

I’m really glad it was helpful! I’ve also recently tested the Cricut sticker papers, feel free to check it out :)

Oh, it totally can! The thickest material I've printed on was the magnetic photo paper - 670 g/m2 and it worked without any issues.

I also wanna try that, I will post a response here if/when I run a sheet longer than 19 in it

Hi! The maximum print size is A3+ format, so printing bigger than that won't be possible. I'm normally printing directly from my Mac or Canon Print app when printing from an IPad - these options totally fulfill my requirements :)

Polecam tego właśnie producenta: gptoner.pl/pl/products/samoprzylepny-papier-diamentowy-holograf-20-szt-a4-pap-csf013-698.html :)

@@KariArtspace dziękuję, jesteś wielka

Thank you so much!

Oh yeah, I totally get it! Thank you so much for watching :)

Dziękuję za komentarz! :) Ważne jest aby wybrać folie która nadaje się do drukarki atramentowej (ewentualnie laserowej, jeśli takiej Pan używa) - takiego wydruku nie rozmażemy palcem, aczkolwiek nie jest on wodo- czy termoodporny. W tym filmiku drukuje na takiej właśnie folii: th-cam.com/video/zkd_tY6ZdzQ/w-d-xo.html

Thanks a lot 😊

Ohhh I can imagine how frustrating this must be! Have you maybe tried printing using the slower mode? It is one of the settings which also prevents ink smudging. If you wish you can share an example of the print outs via the e-mail with me, maybe we can somehow get to the bottom of this 🥺

Thank you for watching! I would say you can choose between Joyeza, J&J Packaging and Zicoto, cause I felt like Lzerking stickers turned out to be more contrasting than I initially envisioned, but I do like that :)

Really glad you enjoyed it and thank you for watching! 💕Since the matte papers tend to absorb more ink, I use the "glossy photo paper" setting or similar to make sure the printer deposits more ink onto the paper, besides if the print should be of the best quality possible I use the "best or highest" print quality. A lot also depends on the way you create your art and colour profile you store it in.

@@KariArtspace I'll try this trick with the glossy photo paper setting on matte papers, thank you for the tip!

@@stefanie.sparkles Hi! Did it work putting glossy paper instead of the matte one?

@@giuliagaviano3294I only used matte paper, and tried several settings, even the one Kari recommended, but did not help. Had to run many-many test, used many papers and finally got what I wanted!

Glad you enjoyed it! I would recommend any of the vinyl sticker paper brands I'm reviewing in this video, depending on what's more easily available or cost-efficient for you :)

I'm using Cricut Maker :)

Hi! You can customise the paper size, keeping in mind that the maximum custom media size is 329 mm x 483 mm. So I would say the printer is not designed specifically for that, I suggest you look into purchasing the Canon Pixma PRO-200.

I've only experimented with 1 brand so far, so maybe in the future :)

Hi, thank you for watching! Unfortunately not, unless you turn the page yourself.

​@@KariArtspace Thankyou for answering my question, if you don't mind me asking again, can i print using Art Carton paper with this device?

@@aldopratama9394 Oh I absolutely don't mind, but somehow your comment got lost so I couldn't address the question, sorry for that! Is the paper you refer to used for offset printing? If so, I would advise against it as it might lead to unsatisfactory quality. Are you looking for some printer to do high-volume commercial printing?

@@KariArtspace I tried asking it from instagram but i guess it got hidden from the request haha, i don’t really know if it was meant for offset printing, but i’m looking for a paper that is 260 to 310gsm, glossy on both sides for my personal photocard merch, do you have any recommendation?

Oh I believe that's what happened! I'll make sure to check it ☺️ If you're planning to use the paper with this printer, my only suggestion would be to look for a glossy double-sided paper for inkjet printer, however I can't recommend anything specifically. If you haven't looked into this option yet, outsourcing the photocard printing to a printing house might be more cost-effective.

Happy holidays!

Thank you so much 😀

Thank you for watching! I believe the longevity of the illustrations depends on the ink and the printed material. Some of the acid-free paper I've printed on mentioned the illustrations/photos can last up to 100 years. Anyways all the things I've printed in the past 3 years have the same vibrancy as the day they were printed :)

Hi there! Does it spit out without even trying to print anything? If so, it is most probably the paper size issue. So the actual envelope size has to match the paper size in the printer settings. I can make a detailed video on that :)

@@KariArtspace thanks so much for the reply! yeah it goes in, sits there for a second then spits it out. The flap also unfolds as it goes in so I don’t know whether to just unfold it flat but then I’m not sure if that affects dimensions. I also tried having the envelopes portrait but it always crumples and doesn’t feed neatly causing it spit out anyway 🫠🫠 any help especially if you have a Mac would be so helpful!

Hi again! I've just posted the video on how to print the envelopes, hopefully this helps a bit ☺️

Ohh this is the best compliment! ✨🥰

Really glad to hear that! Thank you 💕

I got mine in the local stationery shop, it's a Polish brand unfortunately not available globally :/ Try searching "self-adhesive holographic paper" on the Amazon :)

@@KariArtspace Thank you for replying! I will look that up :)

If it's meant for an inkjet printer - absolutely :)

@@KariArtspace can u put some link where i can find it? Pls😊❤️

@@lalalandentertainment318 I've seen some videos where crafters used this one, the results are pretty good! a.co/d/iRmL3MY. Check out this video: th-cam.com/video/kPmAXB3-NCE/w-d-xo.html