วีดีโอ

when do you vent out after the fill?

Loved it, I was not aware of the show. I will definitely check it out.

Yong heng for larger fill tanks "over 1 litre' and the others that run on 12v for just filling guns up or small Buddy bottles is the way to see it. I may be wrong but from all I've read,seen and talking to my friends it's the Yong heng for cylinders up to 6.8 litres, I do know one or two that fill 9ltr and 12ltr tanks/cylinders using the Yong heng. Just a case of doing it in bits not all at once. Keep the temps low is the key apparently.

They do the same version now with 18v batteries I believe "if memory serves and that's iffy at times lol" Is there much difference between this and the older versions that sell everywhere under various names ?

Great video, thanks. I got some of the medium fill. About the same weight as my secret mixture of beans and peas, but so much better in terms of feel and how it conforms to a variety of things and then locks in. 777

I’m loosing air in my cs4 and cannot locate it. I’m good at finding leaks but this is crazy, could it be leaking from the inside where the piston is?

For anyone that cares, MiP makes some of the best allen/hex drivers on the market. They are geared towards RC racers, like myself, but they are fantastic sharp drivers that are nearly impossible to strip fasteners with...... they are expensive.

Excellent video - getting my new Diana Stormrider tomorrow. When’s the best time to polish. Safe to do on pcp? Removing the barrel is a little intimidating for me. Thanks

I’m a believer - thanks, I’ll give it a try.

Great video Bill. Got the bag, now the rest👍

Rossi is the biggest tool in the entire industry.

Congratulations on the great sponsorship and great interview as well

Where is this? I’m in Gettysburg how do I come?

Is there a part 3 of this Notos upgrade, or is there another platform where i can see it? I'm an old man, just getting into the precharged world. Just bought my 1st pcp rifle, an AirForce Escape for my 56th bd present to myself . I feel like I did when I was 14, waiting on my Benjamin 342 i got for Christmas...

I wish there were a way to remove the moderator or a guide. Its quite annoying seeing as how the only way to install a plenum is removing the moderator somehow, and it being molded makes it difficult

I own both Yong Heng, and the C2 compressor. The Yong Heng fills REALLY quickly, but I tried to make one of those all in one radiator zip tied to the side so it's a portable unit with no need for a bucket of water and of course I seized the motor. Now I need to rebuild it. In the meantime I'm using my C2 which is slower, but it requires NOTHING but an outlet to plug it in, r on the field attach to your car battery. It is SO easy and reliable !!! I'm SOO grateful to have a spare pump.

🎯🇬🇧🇺🇲✌🏼🤩

Shooting fire, eh?

😂

🎯🇬🇧🇺🇲❤️🙏🏼

🎯🇬🇧🇺🇲🇨🇦🇦🇺✌🏼🤩

Just bought one how do I purge it out?

😂👍🏻

Creativity in action!

Great video Bill! I’ve been using the plastic picks for a while with good results. Put a small “dime rock” baggie of breech o rings for what ever caliber you are shooting along with foster fitting rings in with the picks. Those are ones you’ll be scrambling for on competition day.

$299 far to pricey. For little compressors you'll burn them up using these big filters. You're filling a filter that's way bigger than the rifle.

How the diameter size your membran seal in milimeter?

Listen Up Sizzle Chest, Knock Off The Politics And Bring Back The Dancing Woman!

Excellent selection, Bill. I've ordered myself a set ($69.26) and will be glad to have them onhand!

Does the unit come with everything you need for a deadhead test?

Do you recommend an additional filter?

True that on the JB products. Something of note to those that have not thought bore poling thru. One, No mothers or any other mag wheel polish. They are is made for Alu.. Not steel. Entirely the wrong type of grit. Secondly, No, JB is not like the brown or reddish bar compounds. Those are jewelers rouge. Made again for non ferrous metals such as brass, silver, bronze and so forth. Not steel. Compounds for steel are Green/White/Pink. They are alu. oxide and made for polishing steel. An alternative for steel final polish in a bbl. is Flitz metal polish. It is ultra fine and made for steel. I use JB Bore paste initially and follow with flitz or JB bore brite. Both do a fine job and are non inbedding. For those that do not want to spend over priced line such as shown, although a great product, It is nothing more than weed cutter line. Most or many of us have weed whackers. I use Stihl line and it works just fine and I have tons of it. I make stops for it from very small dis. shrink tubing. ;<) KnifeMaker/Retired after over 47+ years in the Craft

I’ve not been able to get any of these links to work. 😢

Once again, you the man Bill. Very nice..ordering now. EXACTLY why I follow you brother. Thanks Again👍

Do you recommend the amazon protection plan?

I ordered the nylon kit. Thanks for the link. One thing that sometimes gets overlooked is how useful a pic can be in replacing an o-ring, and a thin nylon pick can be just the solution.

I am not getting audio on this video.

Thank you.

When you said some airguns have a ridiculous amount of O-rings I instantly thought of my FX Impact. Goodnight there are a lot of them I it! Thanks for the idea for the kit. I’ve been using the dental pick kits with the toung scraper in it at Dollar Tree. I use toothpicks too. That kit will be a nice change. Thanks.

Thanks for the recommending these ideal O-ring picks for removing O-rings. This will greatly reduce the chance of damaging not just the O-ring but, more importantly, the O-ring groove when trying to remove an O-ring. I just ordered all the items you recommended in this video.

The O-Ring Tool Kit Is Nice, Now Bring On The Dancing Woman!

Now if we could just find a supplier that sells brand and model specific kits, wouldn't that be nice :-)

I’m about 400 pounds and that table holds me no problem, by looking at the physics of the table and the steel used that table can easily hold me plus a couple hundred more pounds, only modifications I made was redrilled some holes to slide the seat back a little more being I have a bit of a belly, anyways they’re great tables and I also ordered a 3/16” rubber mat for the top off of Amazon for better grip, I want to actually paint the bedliner material on it

Thanks Bill! I have a Caldwell Stable Table Lite that folds up for easy transport and storage. Maybe a BBQ cover to protect from the weather?

I have had mine for a couple of years now. It is really a great piece of kit highly recommended! Great to hear from Bill. Cheers from the desert SW USA!

Congratulations on the weight loss. I have used one of these. Overall I liked it. I wish it had a better nonstick surface. I’ve thought about spraying some rubberized paint on top. But, and there is always a but, I first have to convince myself to abandon the picnic table. Good job on the video

Love my Caldwell Stable Table! You're right about the weather pounding things left outside. I've got mine set up inside my Shooting Shed. I have the bag for it, but, it weighs about 60 lbs! So, even though it breaks down it's not exactly portable. They also make the Stable Table Lite which weighs half as much, but still supports 275 Pounds! This is my Go-To for field work.

Good information for me just getting started in pcp, Thanks

You know something - your audio is always low. The opener with comes in at normal volume, then when the main program starts I have to turn the volume up every time. Being, like you, Bill, the curious sort, I got out my SPL meter and did a quick "down and dirty" experiment to verify what I thought I was hearing. This is what I found (please note - I am not a scientist and my home is not a laboratory): Background: ~ 36 dBA (birds in the backyard) AGG opener: ~ 74 dBA Sponsers: ~ 78 dBA Pat speaking: ~ 68 dBA Bill speaking: ~60 dBA Johan speaking: 71 dBA As you know, all of this is relative. However, it definitely confirms what my ears told me. Just thought you should know because you can't fix it if you don't know it's broken. ;)

Really enjoyed the overview of the iguana control process and struggle. I myself in my retirement spend a lot of time doing pest control for fun and to help out local farmers with pest birds, rats and groundhogs using my air rifles and firearms when safe to do so. I keep saying I need to come down to Florida to do some iguana hunting. I might even want to come down for a few months. Is there a best time of year to hunt iguanas in respect to avoiding hurricanes, excess heat and peak iguana numbers. Also what are the basic guided hunt rates for a day or week or more of hunting.