DS Motors
DS Motors
  • 29
  • 166 853
Quarter Marker Light Tint for the 99-04 Mustang
Quick video installing the quarter marker light tint onto the 02 Mustang. Very cheap and easy mod to finish blacking out the exterior.
SEC10 Quarter Marker Light Tint; Smoked
www.americanmuscle.com/smoked-quarter-tint-9904.html
มุมมอง: 156

วีดีโอ

BEST way to Test LED Lighting for Your Vehicle
มุมมอง 115ปีที่แล้ว
Using one of these Variable Power Supplies is hands down the best way to test any sort of lighting before you install on your vehicle. Definitely a must buy item if you plan on doing some lighting work down the road. These are very versatile tools that can be used for more than just testing lights for your car/truck. Also, this one that I’m using in the video is cheap ($35) so you can’t go wron...
RAPTOR Style Grille w/ White LEDs for the 2011-2016 F-250/350
มุมมอง 4.5Kปีที่แล้ว
In this video I’ll tell you everything you need to know about buying/ installing one of these Raptor style grills on your 11-16 Superduty. I also go through converting the running lights to white smoked LEDs and the easiest way to wire them up. Overall not a very difficult job, but there’s a few tricky little steps that you will only see in this detailed install. Everything you need to buy: Gri...
Testing Nitto Ridge Grapplers on the 6.7 Powerstroke - 37X11.5R20
มุมมอง 9Kปีที่แล้ว
Review of the Nitto Ridge Grapplers recently mounted on my 6.7 Powerstroke. Wanted the best possible set up I could get for the snow. I go through a detailed description of the tires, why I picked these tires/dimensions for my winter set, and also get out in some snowy conditions to see what these puppies are like in the wild. Even got to pull out a stuck car along the way! Dimensions for the t...
S&B Cold Air Intake - Review/Install - 11-16 6.7 Powerstroke
มุมมอง 11Kปีที่แล้ว
In this video I go through a review and install of one of these S&B Cold Air Intakes. Seems like these are a very popular choice for the 6.7 Powerstrokes. I hit some differences in power/sound/gas mileage that you can expect. Is this worth you hard earned money? S&B Cold Air Intake with Oiled Cleanable Cotton Filter: $349 www.americantrucks.com/sb-f350-cold-air-intake-oiled-cleanable-cotton-fil...
BEST Way to Mount a SOTF Switch on a 11-16 6.7 Powerstroke
มุมมอง 8Kปีที่แล้ว
In this video I show you how to mount a 5 POS switch in your 2011-2016 6.7 Powerstroke. This is probably the best spot to mount a switch on one of these trucks. Replaces the 12 Volt next to the exhaust brake (or if you have an 11-14 there will just be a 12V there, but it will mount up exactly the same way) Here are the extra washers/nuts you'll need: www.amazon.com/dp/B091365NTS?psc=1&ref=ppx_y...
Found a SOTF Switch in my 6.7 Powerstroke
มุมมอง 14Kปีที่แล้ว
Surprisingly, I found a 5 position switch on the fly switch hidden behind the dash of my 6.7 after owning it for a year. In this video I go through some of the tests I did with the different tunes, show some different driving clips, and share my thoughts on the newly discovered switch. If anyone has some other ideas for simple tests I can do to get more data on the different tunes, let me know ...
Sync 2 to Sync 3 (APPLE CAR PLAY) Upgrade for the Powerstroke
มุมมอง 8K2 ปีที่แล้ว
In this video I go through the differences between the Ford Sync 2 and Sync 3 systems, followed by a detailed install (which is pretty easy to do). Note this can be a relatively expensive upgrade, so I give my perspective on if it's worth it, and some different ways you could potentially get your hands on a sync 3 and why I chose to do it this way. Also wanted to say this has the Android Auto f...
Complete Wash/Detail/Ceramic Coat on the Powerstroke
มุมมอง 1.1K2 ปีที่แล้ว
In this video I take you through all the steps of ceramic coating a vehicle from start to finish, including a good wash/detail. Ceramic coating your vehicle yourself is gonna be WAY cheaper than taking it somewhere to get done, but you might have to go out and buy some extra stuff to get it done right. Note the better shape your paint is, the easier and faster this process will go for you. Link...
Procharged 02 Mustang Ride Around + New Suspension Reaction
มุมมอง 4882 ปีที่แล้ว
This video features my first drive with the mustang after the suspension mods. I talk about the differences in how the car feels throughout the ride. The mods included: Coil-overs, Front/rear sway bars, bump steer kit, and strut tower brace/rear shock tower brace. All these combined made for a night and day difference with how the car drives/handles, and after an alignment it is smooth as well....
02 Mustang Strut/Shock Tower Braces Install (Front/Rear Braces)
มุมมอง 1.5K2 ปีที่แล้ว
In this video I install the strut tower brace and rear shock tower brace from SR Performance. These installs will take you probably only a couple hours, but be aware there is some cutting/drilling involved on your car. Both of these braces come in black as well as the chrome I went with as seen in the video. SR Performance Strut Tower Brace; Chrome: www.americanmuscle.com/sr-strutbrace-9404-gtv...
Baer Bumpsteer Kit Install (99-04 Mustang)
มุมมอง 2.5K2 ปีที่แล้ว
In this video I install the Baer bumpsteer kit on the mustang. It is wise to do this if you have lowered your car. After the install remember to go get a fresh alignment, and you'll be ready to roll. Baer Bumpsteer Kit (94-04 Mustang) www.americanmuscle.com/baer-mustang-bumpsteer-kit-3261007.html
99-04 Mustang Sway Bar Install (Front/Rear)
มุมมอง 4.4K2 ปีที่แล้ว
Installed these SR Performance Sway Bars on the Mustang during the suspension overhaul. Pretty easy install, and would be even easier if you have a lift. I'll post the video soon of the first drive after the sway bars and the rest of the suspension mods to report any noticeable differences in the handling. SR Performance Front and Rear Sway Bars: www.americanmuscle.com/srperformance-swaybar-kit...
Dropping the 02 Mustang Down LOW with a New Coil-Over Kit
มุมมอง 2.8K2 ปีที่แล้ว
Dropping the 02 Mustang Down LOW with a New Coil-Over Kit
First Time Fender Rolling/ Intro to Suspension Overhaul on 02 Mustang
มุมมอง 3742 ปีที่แล้ว
First Time Fender Rolling/ Intro to Suspension Overhaul on 02 Mustang
2016 F250 Recon OLED Taillights Install/Review + Upgraded LED Reverse Lights
มุมมอง 2.3K2 ปีที่แล้ว
2016 F250 Recon OLED Taillights Install/Review Upgraded LED Reverse Lights
Where to Find Factory Door Code 2011-2016 F250/F350
มุมมอง 4.5K2 ปีที่แล้ว
Where to Find Factory Door Code 2011-2016 F250/F350
6.7 Powerstroke Muffler Delete + 10 inch Axle Dump
มุมมอง 11K2 ปีที่แล้ว
6.7 Powerstroke Muffler Delete 10 inch Axle Dump
DO NOT BUY the H&S Mini Maxx Tuner For Your 2016 6.7 Powerstroke
มุมมอง 13K2 ปีที่แล้ว
DO NOT BUY the H&S Mini Maxx Tuner For Your 2016 6.7 Powerstroke
2016 F-250 BDS Steering Stabilizer Install
มุมมอง 12K2 ปีที่แล้ว
2016 F-250 BDS Steering Stabilizer Install
Husky Wheel Well Guard Install/Review 11-16 F-250
มุมมอง 2.2K2 ปีที่แล้ว
Husky Wheel Well Guard Install/Review 11-16 F-250
11-16 F-250 Tailgate Assist Install
มุมมอง 9K2 ปีที่แล้ว
11-16 F-250 Tailgate Assist Install
6.7 VS 6.0 Exhaust Sound (COLD START)
มุมมอง 28K2 ปีที่แล้ว
6.7 VS 6.0 Exhaust Sound (COLD START)
How to BLACK OUT behind the 99-04 Mach 1 Grill Delete
มุมมอง 7502 ปีที่แล้ว
How to BLACK OUT behind the 99-04 Mach 1 Grill Delete
11-16 F-250 All SUPERDUTY Lettering Inserts Install
มุมมอง 4K2 ปีที่แล้ว
11-16 F-250 All SUPERDUTY Lettering Inserts Install
11-16 F-250 Aftermarket Headlights Install/Review
มุมมอง 1.7K2 ปีที่แล้ว
11-16 F-250 Aftermarket Headlights Install/Review
2016 F250 LED Mirror Lights/Cab Lights Upgrade
มุมมอง 5K3 ปีที่แล้ว
2016 F250 LED Mirror Lights/Cab Lights Upgrade

ความคิดเห็น

  • @RonaldGonald
    @RonaldGonald หลายเดือนก่อน

    Do they make these in orange ?

    • @dsmotors176
      @dsmotors176 หลายเดือนก่อน

      I have not seen this exact triple stripe pattern in only amber. You may be able to find it if you do some deeper research. Also, if you really wanted the pure amber look you could connect the amber power to the running light power and switchback to make it amber all the time, but you would have to make your own little wiring harness

  • @mariomueller7255
    @mariomueller7255 หลายเดือนก่อน

    In all honesty, would you recommend these for what they are worth...I am putting in a new k member and I want coilover only and these seem pretty good on the surface...what do you think?

    • @dsmotors176
      @dsmotors176 หลายเดือนก่อน

      They're a good bang for your buck if you want a little lower price range. I run them completely adjusted to firm and very low so the ride kinda sucks. But I believe adjusted the right way you can make these good for a daily driver as well. I think it is a good price for my build, but if you're trying to build the best car with the best parts, I'd buy something else

    • @mariomueller7255
      @mariomueller7255 หลายเดือนก่อน

      ​@dsmotors176 thank you bro, just what I needed to hear 💪

  • @danielperez2348
    @danielperez2348 2 หลายเดือนก่อน

    Does the Apple CarPlay work with just Bluetooth or does it have be connected to the dock for it to work?

    • @dsmotors176
      @dsmotors176 หลายเดือนก่อน

      @@danielperez2348 the only way apple car play will display with this is through the usb cord. Bluetooth will connect but it will not have apple car play display. It will just play through the Ford sync 3 display with Bluetooth

  • @Siidhu47
    @Siidhu47 2 หลายเดือนก่อน

    question for you man. i took my 2000gt sway bar out and put it back on but now every time i go over a bump at angle the tires are cutting into the rear fender. any idea how i can fix it. im thinking there is a problem with how i put the sway bar back in?

    • @dsmotors176
      @dsmotors176 หลายเดือนก่อน

      @@Siidhu47 you possibly could’ve mounted it in a way where it’s not actually bolted to the frame. I would just verify those bolts are still in place and that everything’s in the right spot, cause it is a pretty simple part

  • @brigman69
    @brigman69 2 หลายเดือนก่อน

    Crazy a year later and you can get this setup for 650-750 from legit websites

    • @dsmotors176
      @dsmotors176 2 หลายเดือนก่อน

      You gotta be kidding me!

    • @brigman69
      @brigman69 หลายเดือนก่อน

      @@dsmotors176 nah for real i just ordered one couple months ago full plug and play for 750 to my door step.

  • @sergiomurillo9930
    @sergiomurillo9930 2 หลายเดือนก่อน

    Where did you get your headlights?

    • @dsmotors176
      @dsmotors176 2 หลายเดือนก่อน

      Started with raxiom aftermarket headlights and replaced the components with HID projectors/ hex halos

  • @gregassaf4851
    @gregassaf4851 2 หลายเดือนก่อน

    Does anyone know the exact sizes for the 4 bolts that mount both stabilizers?

  • @drewkop7040
    @drewkop7040 2 หลายเดือนก่อน

    U want it to look factory lol

  • @gonzaf250
    @gonzaf250 3 หลายเดือนก่อน

    What did you ask (for the 5 tunes). I just got a warlock retrofit kit with a kc stage 2 turbo for my f250. How much was the tune for it ?

    • @dsmotors176
      @dsmotors176 3 หลายเดือนก่อน

      The truck was tuned before I bought it, so I'm not 100% sure how much HP each tune adds, or what they do. In this video I explain what my best guess is, and some tests I conducted on each tune to figure them out: th-cam.com/video/N5eNcWE6_bA/w-d-xo.html

  • @Highmiler74
    @Highmiler74 3 หลายเดือนก่อน

    They are called U Bolts not U Joints

  • @ccm302
    @ccm302 3 หลายเดือนก่อน

    Can you tell me what the specs or what the part number is for the shock? I'm trying to engineer it such that it pulls instead.

    • @dsmotors176
      @dsmotors176 3 หลายเดือนก่อน

      Link is in the description to where I bought it. You should be able to find specs there

  • @cris2valve
    @cris2valve 5 หลายเดือนก่อน

    engine making a weird whine noise

    • @dsmotors176
      @dsmotors176 5 หลายเดือนก่อน

      got that spool going

  • @riffelsrifles2981
    @riffelsrifles2981 6 หลายเดือนก่อน

    I have a 2016 f350 6.7 powerstroke with the mini maxx v2. Left the EGR in place for almost a year, I removed it along with the intercooler pipes and intake pipe. From pusher and now I’m throwing a code P00BD “MAF sensor, on my mini maxx it shows zero airflow but the code says too much airflow. Replaced MAF sensor and plug with no luck. Could this be my tuner?

    • @dsmotors176
      @dsmotors176 6 หลายเดือนก่อน

      I'm no expert, but sounds like it could be the issue. Not sure if there's any mechanics on here that have any ideas

    • @riffelsrifles2981
      @riffelsrifles2981 6 หลายเดือนก่อน

      Ok. Thank you

  • @isaacmiller9931
    @isaacmiller9931 6 หลายเดือนก่อน

    what one is louder the 6.0 or 6.7??

    • @dsmotors176
      @dsmotors176 6 หลายเดือนก่อน

      After deleting the muffler on the 6.7, and essentially having the same 5 inch straight pipe on both trucks I would say they're just about the same loudness when mashing on the throttle. But the 6.0 has the way louder turbo spool in idle, especially for the 03/04, (mine was an 07) and the way it trumpets when you get into higher RPMs makes it louder and (in my opinion) sound cooler than the 6.7😎

  • @AllThingsRamdom
    @AllThingsRamdom 6 หลายเดือนก่อน

    Looks like they have a new fix that you can download for the V2 tuner on 2016 year trucks.

  • @matthewmccollum02
    @matthewmccollum02 6 หลายเดือนก่อน

    6.0 on 🔝

  • @tanner254
    @tanner254 7 หลายเดือนก่อน

    Looks like an install possibly from No Limits Fab if it was it will have the name in the bottom of the switch on the green motherboard

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      Yep it did have that name on the switch

  • @bullproductionfilms8744
    @bullproductionfilms8744 7 หลายเดือนก่อน

    Just did my swap and I don’t have none of that. I have a platinum f150 and I swapped over my kit and yes I’m able to use my ac seats and massage seats but they don’t come up on my radio and neither does my 360 cam. I was told I have to go through obd2 and configure radio to my truck

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      What year is your truck

    • @joshhaley43
      @joshhaley43 6 หลายเดือนก่อน

      Can likely add it with forescan

  • @johnparsons6860
    @johnparsons6860 7 หลายเดือนก่อน

    Awesome looking and finally Ford offers them on the 2023 and up from the factory . Truck looks mean !

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      Thank you 👍 and that is good to know for the 23s

  • @churchking2527
    @churchking2527 7 หลายเดือนก่อน

    I wanted to get one... but I am not at all interested in drilling through the strut tower, I feel like that could impact structural integrity over time.

  • @williambauer5790
    @williambauer5790 8 หลายเดือนก่อน

    Lift wheel and tire setup?!?

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      theyre 37X12.5R20 tires and I got a 6 inch lift

  • @ericharding5041
    @ericharding5041 8 หลายเดือนก่อน

    Custom, that's how we roll... Very creative!

  • @JoelFelix-g2f
    @JoelFelix-g2f 8 หลายเดือนก่อน

    Great video man, I just got an F250 super duty gifted to me and I've been doing all the little modifications I can, this one was the easiest, thank you for that man

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      glad this helped👍

  • @KeenanCordova
    @KeenanCordova 8 หลายเดือนก่อน

    What year is this truck and will you show how you connected the pins into the fuel sensor under the hood?

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      its a 2016, I didn't do the wiring myself, and I'm currently overseas, but I will look into it when I get back

  • @kylehigley547
    @kylehigley547 8 หลายเดือนก่อน

    Are both your camber plates adjusting the same way towards your motor? Because I think they made mine wrong and one plate adjusts towards the motor and the other adjusts side to side parallel to the car.

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      I have not played around with the camber plates yet. I'd double check the way you installed them and if they're actually jacked up I'd bet american muscle would give you a refund if thats where you got them.

  • @jd_media7375
    @jd_media7375 8 หลายเดือนก่อน

    How’s the ride? I’ve heard these are super rough

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      yes ride is very rough lol, I do have them adjusted to be as firm as possible right now though

  • @travisv7233
    @travisv7233 8 หลายเดือนก่อน

    What size lift is your truck

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      6 inch lift on 37s

  • @Wentworth707
    @Wentworth707 8 หลายเดือนก่อน

    Where do you get this grill? I'd like to get one for my truck, do you have a link to purchase it?

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      Link is in the description👍

  • @anthonysmith2711
    @anthonysmith2711 8 หลายเดือนก่อน

    Hey, question for ya. Is your car a stock block 2v w/ blower?

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      Yep stock block, only other things I have are .410 gears, the bigger injectors that come with the procharger kit, and a cat back exhaust.

    • @anthonysmith2711
      @anthonysmith2711 8 หลายเดือนก่อน

      @@dsmotors176 anyway I could pick your mind a bit more? I have 2002 Roush Stage 1. Want a little boost and was considering doing something similar to yours. Just don't know if that to much on motor...

  • @ericvonhellens8822
    @ericvonhellens8822 9 หลายเดือนก่อน

    How is the handling after a year?

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      Rides pretty rough unless the road is brand spanking new. But does have a good bang for the buck if you're trying to get some better handling than stock on a smaller budget. Also, car is so low I almost tore the exhaust off several times. Need to look into air ride soon

    • @ericvonhellens8822
      @ericvonhellens8822 8 หลายเดือนก่อน

      @dsmotors176 thank you for the update. I am looking for something that isn't air, too pricey. Trying to find someone that can inform me of the advantages and disadvantages of coilovers vs shocks/springs.

    • @dsmotors176
      @dsmotors176 8 หลายเดือนก่อน

      @@ericvonhellens8822 Coil overs will give you a better ride, and are usually adjustable for height and stiffness of the ride, while springs will just give you a lower height depending on the size spring and are typically cheaper

    • @ericvonhellens8822
      @ericvonhellens8822 8 หลายเดือนก่อน

      @dsmotors176 thank you for this.

  • @AMOffRoad
    @AMOffRoad 9 หลายเดือนก่อน

    Hey there! This is Rita from AMoffroad team. I like your content! Do you accept sponsor products?

  • @willybeamon
    @willybeamon 10 หลายเดือนก่อน

    Thinking about getting a set of these. How is the ride on these and is the adjustability hard on them?

    • @dsmotors176
      @dsmotors176 7 หลายเดือนก่อน

      Ride is definitely rough, but I also run them fully adjusted to "hard" on the stiffness. See my full review on the ride quality here: th-cam.com/video/oosIFP7j0Uc/w-d-xo.html

  • @plutoxdior6541
    @plutoxdior6541 10 หลายเดือนก่อน

    would a cold air intake make a stock non tuned 6.7 throw codes?

    • @martincurtis2257
      @martincurtis2257 7 หลายเดือนก่อน

      No you just disconnect your batteries before install for a couple hours so the ECM can “forget” the old flow rates.

  • @demonofdeath6661
    @demonofdeath6661 11 หลายเดือนก่อน

    Put the link on wrong.

  • @emon550
    @emon550 11 หลายเดือนก่อน

    i have a 2016 f250, and i have the H&S "V2" mini maxx and i do not have the check engine light. there is a file for you to download for the v2 version. look it up and learn. oh...yes it is deleted

  • @JoseJimenez-iy5nh
    @JoseJimenez-iy5nh 11 หลายเดือนก่อน

    Is tune required for this SB intake ?

    • @Sochack
      @Sochack 4 หลายเดือนก่อน

      No

  • @miguelledezma7361
    @miguelledezma7361 ปีที่แล้ว

    Can you do a video on what you did to your adjustable damping on these coil overs because, mine feel extremely rough and I’ve been trying my best to mess around with them to find my preference

    • @liamordones7790
      @liamordones7790 10 หลายเดือนก่อน

      Put some kyb quad shocks & you will a really smood ride makes a diferent ?

    • @dsmotors176
      @dsmotors176 5 หลายเดือนก่อน

      th-cam.com/video/oosIFP7j0Uc/w-d-xo.htmlsi=ok2leWjP7hkryzNP this video shows me adjusting the stiffness in the beginning

  • @michaelgarrity3824
    @michaelgarrity3824 ปีที่แล้ว

    Could you do two one on passengers side as well

  • @vincentvijil768
    @vincentvijil768 ปีที่แล้ว

    I’m dealing with after I installed my intake when I run it through the car wash will throw a check engine light and reduce power light almost like something is getting wet. I let it sit for and hour and check engine light is gone and truck runs like normal. Wonder what is cause it any suggestions????

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      I would take it to an autozone/ advanced auto to scan the codes to see exactly what the problem is. If I had to guess it would be that you're gasket on the mass airflow sensor on the intake got misaligned when you installed, or the wiring might not have connected it all the way, and water got in there. I'd start by focusing on that sensor, take it off and reinstall it making sure everything looks good, and is sealed properly. Hope this helps.

    • @Randy_Savage_ohyeah
      @Randy_Savage_ohyeah 5 หลายเดือนก่อน

      S&B does sell a sleeve that goes over the filter to shed water if water is the issue.

  • @brenden4258
    @brenden4258 ปีที่แล้ว

    Did that grill come with the truck or is it aftermarket

    • @mobkinq
      @mobkinq ปีที่แล้ว

      I think they sell the “inserts” for the grill. I’ve seen them somewhere. They also have the Raptor Style grill. Trying to come to terms In doing the upgrade. Just not sure yet

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      It's the stock grill, but it was color matched to shadow black to match the truck. I bought the truck with this already done, but it would've chrome from the factory.

  • @HomeGurl54
    @HomeGurl54 ปีที่แล้ว

    Thank you so much for this

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Glad I could help!

  • @HalfmoonVIP
    @HalfmoonVIP ปีที่แล้ว

    Keep up the videos man love the content and the humor

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Thanks, I appreciate that👍

  • @abibodlogistics
    @abibodlogistics ปีที่แล้ว

    Hello,I just saw your channel this morning and I like the brand of air intake that you have,as a matter of fact I have been seeing other brands but I just like this with the transparent casing that it has.I have the 2004 Ford F 350 SuperDuty 6.0 Lariat Crew Cab Dually,do you think that I can get something like this for my truck and where can I get it.Thanks,I look forward to hearing from you about this subject matter.

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Yes look up s and b cold air intake for 6.0 powerstroke and you should find what you’re looking for

  • @40ozdon
    @40ozdon ปีที่แล้ว

    Any updates on the cab lights? How are they holding up?

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      They’ve been holding up well surprisingly, get a little bit of condensation when wet but dries out quickly. Those mirror lights went bad within a year though, bought new ones of another brand that seem to be better

    • @40ozdon
      @40ozdon ปีที่แล้ว

      @@dsmotors176 sweet. I bought morimoto mirror lights a couple months back and so far so good but I’ll definitely give those cab lights a shot for that kinda moneh

  • @obie3653
    @obie3653 ปีที่แล้ว

    Upchurch hell yea

  • @jared2807
    @jared2807 ปีที่แล้ว

    One thing you have to consider since this video was made spaced out. Diesel quality tends to dip down as you get into the colder months. So where I live I only get 14-15 mpg doing 55 in the colder months and in the summer I get 15-19mpg

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Good point, I think I have noticed about 1-2 MPG better now in the summer months.

  • @scottjones5254
    @scottjones5254 ปีที่แล้ว

    2013 f250. I have a SCT tuner with the 5 sotf switch. So mine goes like this… 1-Stock, 2-40hp, 3-80hp, 4-120hp and 5-180hp. I was also told that two “hotter” tunes 4 and 5 would give you better fuel mileage for daily driving if you stay off the peddle and drive it normal/easy. I also took mine on a road trip and 18.6mpg on the 4th switch/120hp.

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Good to know, thanks👍

  • @NG-Star
    @NG-Star ปีที่แล้ว

    Thank you very much, your instructions were correct and made the installation to my F250 easy! Excellent video! Greetings from Central America!

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      Thanks, glad the video helped👍

  • @ryanbaldwin4419
    @ryanbaldwin4419 ปีที่แล้ว

    Metric thread or USA thread for the nut?

  • @coreypiskorski7697
    @coreypiskorski7697 ปีที่แล้ว

    Did the new sync 3 have factory navigation on it? I know you installed the satellite gps behind the radio but didn't see you demo the maps.

    • @dsmotors176
      @dsmotors176 ปีที่แล้ว

      For some reason I don't have navigation just on the sync 3, which is weird because the compass works, and I installed that gps device with it. It might be an upgrade option when buying the head unit on different websites, but I'm not completely sure how to get that.