วีดีโอ

Glad you enjoy what I do. This reminds me I need to do and Air Gun dot drill. Its been to long.

@@justinmcbee8881 pull out your fav id watch it

@@recklessjunkie I have 1 more being delivered in the next week or 2 and ill be doing the same with it. Then I will do one with all 3 and go over them in detail.

Thanks buddy. Greatly appreciate it. See you on the range Saturday.

I'm not following you? Its a PRS Rimfire match with different targets and props? Why Stupid and redundant?

Johnathan Elrod At Modacam Custom Rifles in Denver NC. He has a backlog but it will be an amazing rifle when it’s complete.

Thanks Justin, i appreciate your help, i’ll be contacting with him later today. 👍

@@lutherprice2062 Awesome!! Be sure and tell them you saw it on my TH-cam. I get nothing out of it, but I work closely with Johnathan.

Already told him how i found it, turned in a work order this morning. Thanks Justin

its a ball buster that's for sure. I'm going to re run it tonight.

@@justinmcbee8881I have to tune for a new lot of ammo tomorrow. I may just run it tomorrow then. Only issue is I have only 3 mags for my RimX 😂

@@CWNRL22 Yea!!! Thats a tough one. Loading mags wont slow you much.

@@justinmcbee8881 more challenge equals more fun haha

I like the gloss on the Manners in some situations. All of mine are Mat Finish.

I thought it was cool after the fact. It was a great day to see Trace all day long on glass.

Appreciate that. It is the Armageddon Gear Big Ass Bag. armageddongear.com/product/fat-bags/

@@justinmcbee8881 thanks!

We all NEED this. Johnathan has my rifle and just waiting for the conversion to be complete. The name has changed to ModX

Thanks. Greatly appreciate that. It’s my Grail Remington 40X repeater conversion. 1964 model Military Trainer.

I was discussing his CZ builds on Monday. The Mullerworks barrels are freaking hammers with all name brand match ammo so far. Easier to tune and set headspace on for consistency on ignition.

I have a RimX and barrel blank there now for the conversion. From what I get from Johnathan is your existing bolt nose can be modified or you can buy a new one. Then your existing barrel can be modified or a new barrel chambered and cut. All costs are yet to be released. My guess on turn around time is it gets put in line like all MCR work.

Appreciate that. I have been looking for a Gen-1 for a WHILE. It's all it's suppose to be and more.

It's listed in the video bottom left Stage Description. 169y.

@@justinmcbee8881 169, that's impressive!

@@chrislang5659 Appreciate that. We shot out to 325 yards for the match. I lost all my videos but 2. Not sure what happened Card or Camera error???

@justinmcbee8881 I lost some good footage once. Phone overheated. After that I bought an umbrella and taped it to the tripod to block the sun. Worked great, just not on windy days!

@@chrislang5659 I use a GoPro hero 10. I shouldn't have any issues. But anything can happen.

I just completed testing at Lapua test center. 20 rounds in 1.01” @ 100 meters. Dont think I can ask for any better than that. A Remington 40X is a US Military Training rifle. Mine I was a 1964 model that was released to CMP ( Civilian Marksmanship Program ). Then converted to repeater by Modacam Custom Rifles in Denver NC.

@@justinmcbee8881 amazing results and a very cool rifle!

Thank you Dale. I really enjoy it from where it started to now.

Not sure what that means but sounds good!!

This is the long version before they made a short version. I cut it off to be flush with my mags and not be in the way on a barricade. It is an essential piece of kit for me.

Awesome Thank You. I love how it came together.

Yes sir it is!! EC Tuners are the best in my book.

Appreciate that!!

I thought so myself!!

Thanks Dale!!

Appreciate that bud. Notes dont stand a chance now!!

7 & 10 were not my friend!!!! 17 points lost on 2 stages aint good for the score..

@@justinmcbee8881 my hardest ones was 1 and 7. 10 I dropped 4 which I felt was pretty acceptable based on what I was hearing from people

That was a solid score on 10!! Whatever the wind or thermals were doing at 10 I could track. Or my dope was falling pair with the cold temps that morning. I just brushed it off and moved to the next stage. Goldfish Brain!! @@iFknLoveSwat

🤣😂. I am planning to build a similar prop but with fire hose instead of a damn swing seat and chain!!

I have no idea what you mean but I believe you meant. “ That build is mind blowing!! “ 🤯

I tried to throw it in the woods after the match!!

It’s adapt and overcome!!! Knowing what you’re capable of and keep doing it.

It is a Area419 weighted rail. Made the balance very nice. They make great products.

@@justinmcbee8881 oh ok yeah I see not just a standard arcalock rail nice but you still needed the fat bastard weights to get that perfect balance?

Thank You!! That knob is a Sykes Clutch sold by Manners Composite Stocks. It goes in a QD mount and allows for a place a finger can go. It allows you a constant had position and placement on every barricade. It can help with stability, but that’s not its purpose for me.

@@justinmcbee8881 that’s awesome man thanks

One more question lol will that knob work on like any qd sling mount?

@@airaddict6171 yes. I have MagPul and Amazon knockoffs. It fits them all.

@@justinmcbee8881 🤙🏻 thanks bud looking forward to more videos

Thank You!! It’s taken a lot of time, money and effort to get it here.

I swap between my Impulse Air and my Huggett Mini Magna. Both are awesome.

I appreciate that. It has taken a long time to get the Impact to where it is. It's a fine shooter.

I got it from Utah Airguns. I believe it’s an Air Marksman part. It attaches via a factory screw location where the angled bracket would go for second Reg relocation.

Thank You. It has been a long build.

I feel your pain. A buddy of mine came up with the fix and it is 100% legit. I only run my 800mm setup now. 1060fps on Varmint Knockers out to 350y.

@@justinmcbee8881 awesome man are you running the tungsten hammer weight

@@chrisfigueroa3361 my Impact if fully kitted. Tungsten hammer, polished internals, heavy hammer spring, OE Valve spring, Kraford & Lypt probe holder, K&L first stage Reg delete (not 300bar rated) & polished second stage Reg.

@Justin McBee same bit I went back with first reg at 20 bar had to add 13 washer fir it to hold at 20 bar with 700cc bottle 300bar valve don't have k&L probe tho or back bone but yeah all in inside is mod and polished

@@chrisfigueroa3361 Get the K&L probe holder and try one of the Huma Large pellet probes. I swapped from a pin probe to a pellet probe and SD went down 6fps on that change alone. I have no idea why it worked but it did. It sounds like you have a solid setup though.

Thanks. I plan to do a video shortly of the DST Precision D.F.A.T. system. It is a great training/ practice tool for sure.

Accuracy at 50y was phenomenal!! The Ckye Pod is a great bipod. I have the Standard & Double pull. I upgraded both heads with Gray-Ops CNC QD heads. I didn’t like the twist knob from the factory. I also have the GRND Pod. It’s a great option as well for $200.

It is an Area 419 rail. It should allow for weights. I am working with @krafordandlypt on those weights. I should have them mid next week.

@@justinmcbee8881 hell ya dude thanks how is the accuracy so far?

@@airaddict6171 I picked it up at 0 Dark 30 last night!!! I'll find out here in a little while. I have plenty of slugs to test.

@@justinmcbee8881 🤘🏻

Thank You. I appreciate that. your question reminds me I need to do a video on that exact thing. to answer your question NO it’s not square from the factory. mine is square now. machinist friends!!! look for a video this week about that. I’ll try to make it this weekend between shooting and family life. I’ll have it posted next week and try to post the link below. new to the whole TH-cam thing.

Ok thanks for the response I guess I never paid attention to it from the factory 🧐 I thought maybe the rails were machined wrong but I’m looking forward to the video thanks again

I got home from the range this morning and the wife was out shopping!!! Video is up with all the details I could post. Here is the link as well. I hope it helps you. You need anything else just comment and I’ll do all I can with in for to help you. Happy shooting. th-cam.com/video/WcsNbvhnt1g/w-d-xo.html

@@justinmcbee8881 thank you for taking the time to make this video ,this will help me and a lot of others out to I’m sure , I had no idea but it makes complete sense now

@@airaddict6171 you are welcome. It is one of those that’s been on my mind to do. I just kept putting it off. Please share it around.

Appreciate it bud. Those #varmintknocker slugs are awesome.

Thanks. I really like the feel of it. I’m the cold there is a great reference point for your fingers.

I would love to learn more about that dst precision setup

@@airaddict6171 now that I have the TRIGGERCAM 2.1 it will be a lot easier to do. I’ll do one this month.

@@airaddict6171 I will get one up in the next week or so. I have a couple of matches I'm prepping for & we have some good outdoor weather right now!!! Stay tuned to the channel.

Just saw your comment. Sorry I didn’t see it sooner. Glad my build w/ bronze swayed you over the edge. I bet yours is a sweet setup as well.

FX Impact M3 .22 cal w/ 700mm barrel.

Thank You. I really appreciate that. It’s been a fun build that I really enjoy competing with.