- 7
- 1 161 184
IT Support People
Australia
เข้าร่วมเมื่อ 22 พ.ค. 2012
Exploring IT Support task from the Scratch
Convert Cisco Access Point from Lightweight to Autonomous / Standalone
#Cisco_AP #Conversion #IT_Support_People
Step by Step Process Converting Cisco Aironet 3600 Series Access Point from Lightweight to Autonomous version.
Requirements:
1.TFTPd64 Server
2.Cisco IOS Software AP3G2-K9W7-M for (C3600 Series AP)
3.The Cisco AP and the Laptop with TFTP server must be in same network.
According to my network setup
Lightweight AP BVI1 IP address is 192.168.1.4
Laptop's IP address where TFTP server is installed 192.168.1.7 [Default Router IP]
First disconnect the Ethernet cable from the AP then Press the Mode button and Put back the Ethernet cable to the AP and hold the Mode button Until flash light turns to umber and Once the Lightweight AP goes to online then apply the following commands to convert it to Autonomous version:
set IP_ADDR 192.168.1.4 [According to my network setup]
set NETMASK 255.255.255.0 [According to my network setup]
set DEFAULT_ROUTER 192.168.1.7 [According to my network setup]
tftp_init
ether_init
flash_init
tar -xtract tftp://192.168.1.7/ap3g2-k9w7-tar.153-3.JH.tar flash:
dir flash
set boot flash:/ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-mx.153-3.JH
set
boot
==========================
IT Support People Facebook Page:
IT_Support-PeopleDesktop-Support-111268543923018
Link for Other Related Videos and necessary files:
Configure Cisco Access Point Standalone/Autonomous using GUI with WPAv2 Authentication Key:
th-cam.com/video/AwuWsGGofT4/w-d-xo.html
Configure Standalone Cisco Access Point from CLI with WPAv2 Authentication:
th-cam.com/video/JkUfTXuwj2U/w-d-xo.html
Configuring Cisco Router to Access Internet through ISP Home router:
th-cam.com/video/rRgdlhSbczU/w-d-xo.html
Configure VLAN | Allow VLANs to Access Internet
th-cam.com/video/-JeubKTW8-w/w-d-xo.html
Connect Cisco Router using PuTTY & Console Cable | Change Text Color/ Font Size/ Background on PuTTY:
th-cam.com/video/WQeAe8_vbLI/w-d-xo.html
Reset Cisco Access Point to Factory Defaults using Mode Button:
th-cam.com/video/eGCnTWBEpp8/w-d-xo.html
Download Link for TFTPd64 Server:
tftpd32.jounin.net/tftpd32_download.html
Download Link for IOS image of Cisco Aironet 3600 Series Standalone Access Point (AP3G2-K9W7-M):
drive.google.com/file/d/1LORJAC8yp9F4_nANquHw8awZeXlbt1Vx/view?usp=sharing
Covered Topics:
Lightweight to Autonomous (vice versa) Conversion,
Converting Cisco Wireless Access Point from Lightweight Mode to Autonomous Mode and Vice Versa,
LWAPP to Autonomous Conversion and Vice versa on Access Points,
How to convert a Cisco AP from Lightweight to Autonomous (CAP to SAP),
Convert Cisco Lightweight AP to Autonomous,
Access Points Light Weight to Autonomous Conversion and vice versa,
convert lightweight to autonomous 2700
Cisco 3602i autonomous image download,
Cisco AP standalone mode,
how to check Cisco AP is lightweight or autonomous,
autonomous AP IOS software download,
Cisco autonomous AP configuration example,
autonomous to lightweight mode upgrade tool,
Cisco AP lightweight vs autonomous,
Download IOS image AP3G2-K9W7-M for Cisco AP,
Converting a Cisco AP from LWAPP to Autonomous mode,
How to convert Cisco air AP from CAPWAP to autonomous,
Step by Step Process Converting Cisco Aironet 3600 Series Access Point from Lightweight to Autonomous version.
Requirements:
1.TFTPd64 Server
2.Cisco IOS Software AP3G2-K9W7-M for (C3600 Series AP)
3.The Cisco AP and the Laptop with TFTP server must be in same network.
According to my network setup
Lightweight AP BVI1 IP address is 192.168.1.4
Laptop's IP address where TFTP server is installed 192.168.1.7 [Default Router IP]
First disconnect the Ethernet cable from the AP then Press the Mode button and Put back the Ethernet cable to the AP and hold the Mode button Until flash light turns to umber and Once the Lightweight AP goes to online then apply the following commands to convert it to Autonomous version:
set IP_ADDR 192.168.1.4 [According to my network setup]
set NETMASK 255.255.255.0 [According to my network setup]
set DEFAULT_ROUTER 192.168.1.7 [According to my network setup]
tftp_init
ether_init
flash_init
tar -xtract tftp://192.168.1.7/ap3g2-k9w7-tar.153-3.JH.tar flash:
dir flash
set boot flash:/ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-mx.153-3.JH
set
boot
==========================
IT Support People Facebook Page:
IT_Support-PeopleDesktop-Support-111268543923018
Link for Other Related Videos and necessary files:
Configure Cisco Access Point Standalone/Autonomous using GUI with WPAv2 Authentication Key:
th-cam.com/video/AwuWsGGofT4/w-d-xo.html
Configure Standalone Cisco Access Point from CLI with WPAv2 Authentication:
th-cam.com/video/JkUfTXuwj2U/w-d-xo.html
Configuring Cisco Router to Access Internet through ISP Home router:
th-cam.com/video/rRgdlhSbczU/w-d-xo.html
Configure VLAN | Allow VLANs to Access Internet
th-cam.com/video/-JeubKTW8-w/w-d-xo.html
Connect Cisco Router using PuTTY & Console Cable | Change Text Color/ Font Size/ Background on PuTTY:
th-cam.com/video/WQeAe8_vbLI/w-d-xo.html
Reset Cisco Access Point to Factory Defaults using Mode Button:
th-cam.com/video/eGCnTWBEpp8/w-d-xo.html
Download Link for TFTPd64 Server:
tftpd32.jounin.net/tftpd32_download.html
Download Link for IOS image of Cisco Aironet 3600 Series Standalone Access Point (AP3G2-K9W7-M):
drive.google.com/file/d/1LORJAC8yp9F4_nANquHw8awZeXlbt1Vx/view?usp=sharing
Covered Topics:
Lightweight to Autonomous (vice versa) Conversion,
Converting Cisco Wireless Access Point from Lightweight Mode to Autonomous Mode and Vice Versa,
LWAPP to Autonomous Conversion and Vice versa on Access Points,
How to convert a Cisco AP from Lightweight to Autonomous (CAP to SAP),
Convert Cisco Lightweight AP to Autonomous,
Access Points Light Weight to Autonomous Conversion and vice versa,
convert lightweight to autonomous 2700
Cisco 3602i autonomous image download,
Cisco AP standalone mode,
how to check Cisco AP is lightweight or autonomous,
autonomous AP IOS software download,
Cisco autonomous AP configuration example,
autonomous to lightweight mode upgrade tool,
Cisco AP lightweight vs autonomous,
Download IOS image AP3G2-K9W7-M for Cisco AP,
Converting a Cisco AP from LWAPP to Autonomous mode,
How to convert Cisco air AP from CAPWAP to autonomous,
มุมมอง: 132 770
วีดีโอ
Reset Cisco Access Point to Factory Defaults using Mode Button
มุมมอง 223K3 ปีที่แล้ว
#Cisco_AP #Reset #IT_Support_People IT Support People Facebook Page: IT_Support-PeopleDesktop-Support-111268543923018 Link for Other Related Videos: Configure Cisco Access Point Standalone/Autonomous using GUI with WPAv2 Authentication Key: th-cam.com/video/AwuWsGGofT4/w-d-xo.html Configure Standalone Cisco Access Point from CLI with WPAv2 Authentication: th-cam.com/video/JkUfTXuwj...
Configure Cisco Access Point using CLI with WPAv2 Authentication
มุมมอง 109K3 ปีที่แล้ว
#Cisco #Configure_AP #IT_Support_People IT Support People Facebook Page: IT_Support-PeopleDesktop-Support-111268543923018 Link for Other Related Videos: Configure Cisco Access Point Standalone/Autonomous using GUI with WPAv2 Authentication Key: th-cam.com/video/AwuWsGGofT4/w-d-xo.html Configuring Cisco Router to Access Internet through ISP Home router: th-cam.com/video/rRgdlhSbczU/...
Connect PuTTY with Cisco Router using Console Cable | Change PuTTY Text Color/ Font Size (CCNA)
มุมมอง 55K3 ปีที่แล้ว
#Cisco #Putty #IT_Support_People IT Support People Facebook Page: IT_Support-PeopleDesktop-Support-111268543923018 Link for Other Related Videos: Configure Cisco Access Point Standalone/Autonomous using GUI th-cam.com/video/AwuWsGGofT4/w-d-xo.html Configuring Cisco Router to Access Internet through ISP Home router: th-cam.com/video/rRgdlhSbczU/w-d-xo.html Configure VLAN | Allow VLA...
Configure Cisco Access Point using GUI Standalone/Autonomous with WPAv2 Authentication Key
มุมมอง 339K3 ปีที่แล้ว
#Configure_Cisco_AP #Standalone_GUI #IT_Support_People IT Support People Facebook Page: IT_Support-PeopleDesktop-Support-111268543923018 Link for Other Related Videos: Configuring Cisco Router to Access Internet through ISP Home router: th-cam.com/video/rRgdlhSbczU/w-d-xo.html Configure VLAN | Allow VLANs to Access Internet th-cam.com/video/-JeubKTW8-w/w-d-xo.html In this video I'v...
Configure VLAN | Allow VLANs to Access Internet
มุมมอง 100K4 ปีที่แล้ว
#Cisco #Configure_VLANs #IT_Support_People In this video I've demonstrated step by step process how to configure VLAN and Access internet from VLANs PC using Putty, Cisco 2851 Router and Layer 3 Cisco 3560 switch. I also described how apply IP routing in cisco switch and how to apply static routing and dynamic routing (EIGRP) protocol in both Cisco Switch and router for inter VLAN routing and a...
Connect Cisco Router & Switch to ISP Home Router and Access Internet
มุมมอง 203K4 ปีที่แล้ว
#Cisco #Router_Configuration #IT_Support_People In this video I've demonstrated step by step process how to connect Cisco 2851 Router and Cisco 3560 Switch to ISP Home router and access internet. I also described connection details and configuration of Cisco router using Putty and console cable. IT Support People Facebook Page: IT_Support-PeopleDesktop-Support-111268543923018 Confi...
Thank you very much ,clear tutorial
Excellent
Won't connecting to your home router via another Cisco router give you a double NAT?
Muy interfaces bvi 1 is down , i make no shut and no turn up
Hello ,I appreciate how you teach And May Gof bless you So how to set Aironet into catalyst C1000
Its great video!
AMAZING
Not work, why? Putty not shown communication with 3502e
Awesome tutorial! When I try to run format flash , it continues to throw error "% Invalid input detected at '^' marker." . I'm unable to go past this, can you help?
Nevermind, was able to work it out by booting into ROMMON mode.
Thank you. After the reset, when I try to configure, it doesn't let me. Here's the error, AP0062.ecf1.af68#configure terminal ^ % Invalid input detected at '^' marker. Could you please help?
I have a problem. Every time I give the flash command I get: tftp://192.168.178.117/ap3g2-k9w7-tar.153-3.JH.tar: connection timed out
cisco switch or router is necessary for configuring Cisco Access Point ???
i have fortinet and sonicwall firewall not cisco router
How do I configure it as a repeator at home.
You forgot to mention simple command at the end of configurations :) write memory. Otherwise after turning OFF and back ON they'll have to reconfigure everything again. Didn't see IP-helper command too. Might be required.
You forgot to mention simple command at the end of configurations :) write memory. Otherwise after turning OFF and back ON they'll have to reconfigure everything again. Didn't see IP-helper command too. Might be required.
Hi do you have image for convert Cisco Aironet AIR - AP1852I - E - K9 from lightweight AP to Autonomous AP Thanks for the support
thank for the best vido for lerning for bigners
everything is wrong
Why you directly not connected ISP cable to Ge0/0 Port of the router?
the "format flash" command simly dosent work for me, has it changed since this video was posted? I have tried it on 2 different computers with different versions of Windows
Did you use your employers room, or why the time was 02 at night?
Can you tell me how to set this up using a 2960 L2 Switch? I ordered a L3 to practice on doing labs. The labs are better when you can reach the internet after making changes.
using dsl in 2024?
hi!, but this reset method works even when the AIR-CAP2702I-Z-K9 are not on the standalone mode? what to do when is isn´t on the standalone mode and you not have a Wireless Controller?
Nice job brother god bless always 🙏
Thank you so much sir
It is 2024 and this guy is amazing!!! Thank you for this video!!!
my AP is this model cisco air-ap3802i-b-k9 factory reset and the configure terminal comand is not recognized i do not what to do i just want to config the AP with host name, DHCP just to connect to my isp then config a SSID and wifi password
When I send the command line the console return error syntax mark ‘^’ I’m stuck! Why?
Hi, I am facing the same error. It says - invalid input detected at ‘^’ marker. How did you resolve it?
Great video and your narration makes it like gold! Thanks!
thanks for the video :) I have a quick question , can we use power adapter instead of POE injector in case my switch has no POE ?
Thank's , from Berazil.
never seen anyone making such detailed recording video from starting from scratch to end , amazing work to put all the efforts to make such brilliant video. we need more such videos , please don't stop making more. thank you. you are amazing dude.
this video is very helpful to learn how to do this but i am facing a problem i put username then enter once i put password i cant type there password , can any help
Very nice video! Would it be possible to get the standalone firmware for AIR-CAP3502I-E-K9? Thanks.
Thx for your video, i have one question? If you connecte with your home wifi are you able to ping 192.168.2.X ???
Nice work out
Very thorough explanation. Thank you
i need your help
Wow, it's the best tutorail. You have what I finding. Keep going on brother.
can you share Industrial Wireless 3702 Access Point Autonomous AP IOS Software
Danke! Greeting from Germany.
This tutorial will have some small issues at least for the users who would like to use web based configuration of the AP. Due to some issues with certificates on the AP. (Look up 215118 from Cisco)
Proud of you my friend. Searching some video on cisco air ap on youtube and suddenly it pops up to my screen.
Hola. Tengo Putty instalado en mi LapTop. Lo he usado sin problemas para entrar a la Linea de Comandos de la Consola de un switch Catalyst WS-C2960+24TC-L. Sin embargo, he tratado de conectarme a la consola de un AP AIR-CAP3602I-A-K9 y no he podido acceder a la linea de comando. No sé cual pueda ser el problema. ¿tienes alguna idea de cual puede ser el problema? Agradeceré tu opinión.
Nice 👍
Great post. Is it possible to have the autonomous firmware for AIR-CAP1702I-E-K9 (ap3g2-k9w7-tar.153-3.JD.tar)? Thank you in advance.
thank brow
Works, but I have to suggest something to Linux users. Use Screen instead of Putty and use a PC with a serial port built-in or a USB dongle that is on Amazon ( it will save you some headaches when connecting to the AP). Also don't forget to format 'flash:' because if you have another firmware installed that is more updated it will defaults loading the one with a higher version number.