วีดีโอ

I find that you need to push it all the way back ( away from you ), then do like you did pulling forward while pushing the button - makes easy pease.

I like the hot shoe cover. I bought one for my R6II, stays on tight, unlike the plastic cover it shipped with.

HEY THANKS BROTHER ...I BEEN TRYING TO THINK OF THIS IDEA

great video. One of the best explanation channels on TH-cam. I wish you would make a video on how to deal with the R6's overheating issues, cause i didn't find a proper explanation Video out there on how to deal with it.

Thank you so much. I finally got it off!

Useful demo - thank you. At least this cover looks as though it needs some intention to remove it, unlike the one on the R3 which just slides in and out. The downside of that is that it can come off accidentally. I lost mine without realising it had come off, I think it may have happened when carrying the camera on a sling type strap with the camera hanging down at my side. I suspect it brushed against my clothing and slid off. A small piece of equipment but not a small price to replace.

okay but what if it’s still not showing up

I love these videos, it doesn't get a lot of views because it's so niche (us r5c owners). But it's so practical, so thanks for making it!

The New Canon LP-E6P battery, significantly enhances the battery life of the Canon EOS R5C, offering approximately **50% more runtime** compared to the older LP-E6 and LP-E6NH batteries

holy cow it works 😀 Thanks for the tip, that darn hotshoe cover drove me nuts.

Outstanding tip! Thanks!

great info, thank you!

How we can connect with my phone

Great info I was struggling with this myself last night on a shoot. For the clear scan option is there an equivalent in shutter speed? Like what does the 59hz translate to in shutter speed

Is there a way to add luts to multiple clips in the editing timeline?

Yes. This is what I was researching. Thanks for confirming my findings.

Can you use the Anker Powercore+ 26800 PD 45W power bank to power both the Canon r5 and and an external monitor at the same time?

THANK YOU!!!

But now… if you are using the usbc from the camera to power it, how do you connect your camera to a laptop for livestream? Remembering EOS web utility does not allow for HDMI output connection… need an answer by tomorrow would be great if you could shade some light

I have an R6 and when we charge the R6 mkii the camera instantly shutts off. When we turn it on it does not turn on.

This is a very good demo showing how to turn a shotgun mic into a wireless solution. I have found another use for this is with cameras that don't have a mic input. I can use the Rode Go II mic on camera with a wireless Go II transmitter to get good audio with headphone monitoring with my Panasonic GX85. I can use the built-in audio on the camera as a scratch track. Thanks for posting!

thank you

I have a canon r6 mark ii. I plugged my HP laptop usb-c charger that powers my laptop into the usb-c port on my camera and my camera would not work. I could not take pictures or video. Screen says camera is on "standby". I had a HLX-E6NH battery in my camera. I then changed my battery to an LP-E6NH. Still didn't work. I live stream often on my channel and I want to start using my canon instead of my laptop camera, but I need continual power for hours and the battery just can't keep up...nor do I want to keep changing the battery in the middle of the stream. I am considering getting that power delivery bank you have from Anker, but if my camera won't work when plugged into my laptop charger...why will it work when plugged into the pd bank you have? Any thoughts on why? Any help would be great.

Great video,thanks 👍

Tnks a lot ! Very usefull !!!

Correction: The timecode port and connector are not mini BNC. The cable connection is called Din1.0/2.3 Connector. There isn't actually a Mini BNC, but there is a Micro BNC, but that isn't what the Canon R5 C uses either. BNC are a twistito-lock connector. For the Canon R5 C the Din1.0/2.3 connector needs to be an extra long connector to prevent it from potentially getting stuck in the camera port. This is explained in the user manual.

Great tutorial. You mind sharing the pdf?

Can GAN chargers be used in a similar way?

Thanks for the informative camera specific video! When you go in the phone App to turn off the time code on the RX I notice the warning says that this will turn off the embedded time code on the TX. I that warning inaccurate or perhaps only if you power the TX off? My unit is arriving tomorrow. Thanks!

I have recorded a few videos with this recommended settings, but the sound is too low when editing. So how can they recommend this manual settings??

🎉your Ninja V monitor would run out of power many hours before the camera since you say you have 12x camera power but only one small np-f battery on the Ninja. Doesn't make sense. A V-mount battery to power both Ninja and camera makes more sense.

Thank you so much Gary. It has now been a year since this question started to bug me.

If you're going to be on a tripod or only moving in an area of a couple feet then just get a dummy battery and be done with it. Plug it in and have infinite power.

Great videos.... love from India ❤. Keep up the good work.

Thank you! 😍

Trying to understand why you don’t have 1000s of followers?! Appreciate the specific insight of your vids and highly legible content 👍👏 Quick question: is there a solution to power Ninja V + R5 via the same USBC/Battery Bank? Thanks much, trying to streamline my kit, and no doubt the canons chew thru batteries esp when shooting C-LOG3.

I have the anker power core 20100 and it doesnt seem to be working. From what i have read, the r5c needs a usb delivery of 9v min. The power bank you show only outputs about 5v though. I wonder why yours works and mine doesnt

Thank you so much!!

I’m making Amazon rich with all my mistakes. I bought a pair of PD chargers only to discover too late they were 20w. NowI have to try again with 60w and better cables.

Which model USB cable you recomment to connect the PawerBank to Camera R6

Great video, thank you! Just again was wanting to ensure the 3A output so that it works with my R5. Was tempted to do a longer timelapse and while I could swap LP-E6N and other batteries, I figure this would help out (and could also serve as emergency power I suppose if away on a trip for some time).

Thanks very much for this clear and highly informative video.I've just ordered a power bank of my own to test this setup with my EOS R5. A key point worth emphasizing is that the USB-C PD needs to support at least 9V/3A and 5V/3A (in my case, from a 45W power bank). I also use a (SmallRig) camera cage but I'm planning to hang the power bank from a hook on the tripod to enhance stability. BTW, it's important to use a good USB-C to USB-C cable that supports Power Delivery (like the one supplied with the R5). I picked up a rather expensive Thunderbolt 4 cable which also supports very high speed data transfers (limited to 10 Gbps (USB 3.1 Gen 2) for the R5). FYI, the Vivitar Creator Series HDMI to USB Video Capture Card is a low cost HDMI capture device which accepts up to UHD resolution and outputs 1080p over USB. I was even able to record to an Android device with an app called “USB Camera (Standard)”.

Very helpful.

Thanks a lot Bro 👍

Great video, you mentioned in a reply that you use it with your C200. What setting parameters are you using to get the lowest noise floor on the C200? I’m getting great results with a little noise reduction in post (Admittedly easy to process as it’s little very background noise) I’m just curious if it can be further improved. Thanks

Thanks for sharing this 👏

Can we remove everything at once?

No Canon video cameras. I guess I just leave it with the default?

So awesome!

Thanks for this information. I decided to give it a try. Can you provide the name or link to the cheese plate and cold shoe your using?