วีดีโอ

Hotwash Atlanta or Georgia Chemical

They faded away I didn't stick around for everything to dry.

Thanks. The customer loves the way it came out.

Hey thanks. I have more videos that needs editing so a lot more to come.

What’s going on Milo. I appreciate your support man. It means a lot to me.

Good to know. I will definitely let him know about the transfer pump.

You can. Be cautious it’s a good chance that it will fade. I would apply a be ready to rinse off. All you need to do is let the organic growth fade.

@@Aqueminipressurewashing what to you think about using a degreaser for awnings would that be a safer yet effective route and thanks again.

If you trying to kill mold. It’s not gonna work you would need to use SH. Just try test spot before you start and let the customer know in advance. What could happen. Most likely if it’s a good awning, it shouldn’t affect it at all. Also try to apply it evenly to help prevent streaks

@@Aqueminipressurewashing this awning is on a busy road no trees so I figured it would have minimal organic growth,and more dirt dust so I figured it might be best and safe to just downstream a degreaser and scrub with a brush then rinse . What do you think.

@@Aqueminipressurewashing thank you for the advice and your time .

Remember you only cutting the strength of the SH. I just made 12.5% into 6.25%. Now in my bucket there is 2 gallons of SH at 6.25%. The only way I can cut that in half is to add 2 more gallons to it. That will give me SH at 3.125%. Don’t over think it. This is safe to use and it will save you money. You don’t have to be exactly you want someone to work and not damage anything.

amzn.to/400ckWS When doing a roof wash. Use a 5% to 6% SH in your mix. Use a 12 V pump to apply the mix. You cannot downstream or use a X- jet when applying. Make sure you wet everything before you start, doing and finishing. This mix can do some damage so be careful.

You are right I wasn’t thinking about that for safety reasons. Thanks I will put that in the new mixing video.

@@Aqueminipressurewashing You're welcome brother ✊

I have more coming. I have to find time to edit them. I think I have about 15 new videos

I got you. The new one won’t have any music. Working on it now hopefully it will be out soon.

Do not adjust the pressure on your machine. I never do that. The way to do a job is GPM. I use a 4 GPM machine. The higher the GPM the faster you can go.

Go for it. If I were you I would start with a few jobs to get your feet wet. Some small jobs and try to schedule them for next year. New videos coming soon. Thanks for subscribing.

@@Aqueminipressurewashing you say schedule jobs for next year because this service is seasonal?

@@Aqueminipressurewashing I planned to get at least ten people to offer services too and asked in return for a google review. To get things started.

Some people get this done yearly. Always good to have repeat customers.

@@Aqueminipressurewashing thanks again for your responses .

Whatever you are trying to clean starts to fade away or change color that’s when you can go ahead and start washing. The stronger the chemical the shorter time.

I learned if you cut the grass at 3 inches it works a lot better. That’s the sweet spot for my mower.

@@Aqueminipressurewashing The thing is:I also would cut it at 3 inches....I hope it works...thank you.:)

No problem

I only use the ZEP on concrete. I do not mix any other surfactant with it.

I wouldn’t do this again because it seems like it’s a waste of time.

I using a 3% SH. You can use up to 5% but I wouldn’t do that unless it’s really bad.

I using a 3% SH. You can use up to 5% but I wouldn’t do that unless it’s really bad.

The X Jet comes with a M5 twist nozzle.

My machine is a 4 gallon a minute machine that is 4000 psi. PSI is not important. Concentrate on the gallons per minute. The higher, the GPM the faster you can go.

Yes sir I believe you are correct. I did the math for 10 gallons of SH into a 30 gallon tank and came up with 4.6875%. I like the way you calculated that but a lot of people just want to know the simplest way to get a good mixture of SH. Me personally I would get a proportioner to keep my SH strength to last longer if I have a tank that big. I don’t think I could use 30 gallons that fast.

@@Aqueminipressurewashing@Aqueminipressurewashing If you have a five-gallon bucket, plugin 5 if your using 10% sh plug in 10. Having the math makes it so you can figure it out without guessing. Once you know what it is for your batch size, just remember those numbers. Easy.

Agreed. But 98% of the time I use 12.5% because that’s the percentage that my supplier sells.

Thanks I try my best

I have a video on backpack sprayer. But it’s not about facial boards. It’s more about a review on the sprayer.

Sorry about that I will update everything. But here is the camera. Insta360 Ace Pro amzn.to/461RUxk

Yeah I didn’t think that through. I do a lot of talking in my videos so I have to learn when to turn off the music.

Well I hope that my videos will help. And I will try to answer any comments you leave.

My down stream injector is a 2.1 rated at 3-5 GPM. This is the second one I have on my machine because the one came on the machine broke. I don’t over think things so if I need a stronger or weaker mix I mix it in my bucket. So I never change out my injector.

Ok I will try to get it done. I have a lot of ideas for some how to’s videos

The 3% will work. I found out that it’s not to strong. I’m not big on ratios I just want to get the job done. With your machine it should be fine if the mix is stronger it will just work faster.

@Aqueminipressurewashing alright so if I downstream it onto siding it should be fine? I guess I should say im using 10.8% and not 12.5% like you are.

Then I would use 3 gallons of water to 1 gallon of SH. Make it a little stronger. Using a stronger mix only will kill everything off faster. Less dwell time.

@Aqueminipressurewashing alright perfect. Thanks brother I appreciate you responding. I subscribed to your channel and turned notifications on and I'll continue to watch your content. Thanks again bro.

Thanks. Hope you subscribe because I’m working on an updated version.

You can wet the surface first. But you may want to downstream the area if it’s that big. Keep in mind that you are killing the organics the cleaning is still done by the pressure washer. If you don’t want it to sit that long use a stronger mix.

Thanks for the offer. But my lawnmower doesn’t have the mulching feature.

It is a 12.5% sodium hyperchloride. Mixed down to a 3% strength.

Sorry to hear that. I went to my local pressure washer supplier and picked out a 4GPM machine. I know that they can be expensive but I wanted something reliable. So if money is a factor check out the marketplace for a deal. Me personally I like machines with belt drive on it because they pull water. Any machine with a general pump should be good with or without the belt drive.

I will get one that matches your machine. So yes get one that matches your GPM. I tried a smaller GPM and the machine didn’t really like that.

Had to check I replace my injector a few years ago. it's a 2.1 rated at 3.5 GPM. The original one stop working it was a cheap one so I got one that they recommend at my supplier.

I have to make time to edit my own videos. Sometimes it goes fast or it can take a few days. I don’t advertise that much because I can’t take on too many jobs. But if I like to increase my clients, I think the best thing to do is start a website for your customers to find you through Google. Look at it this way. If you’re looking for some type of service, restaurants or hotels where is the first place you would look? And always keep up with your customers and reach out to them every year.

@@Aqueminipressurewashing Thanks I just had GoDaddy build me a website, but business is slow, I was thinking about marketing my business, but it is costly and so many to choose from

Going door to door is the cheapest way. What you need to do is find a neighborhood that people take pride in their homes.

There is one on the channel now.

I’m working on a video for that now. But a 3% mix works on about everything.

@@Aqueminipressurewashing Thank You! Guess I gotta sub now to see that one 😀

Thank you 🙏🏽. Hey good luck I hope your business takes off.

@@Aqueminipressurewashing thank you my guy much appreciated godbless

I use the customers water

I use house wash or concrete wash for my surfactant . But you can’t get away with using laundry detergent. Always mix your soap with your solution when you’re about to do the job. No matter what you use for soap or surfactant it will deteriorate the strength for the bleach.

The company I use doesn’t have a link to buy. I’m not sure if they even ship. Look up a pressure washing company in your area I’m pretty sure they should have something similar. If not here’s a link to another product that should be the same. southeastsoftwash.com/products/rust-remedy-non-toxic-stain-remover

You are right about the casters. I may upgrade them to a larger size or do a redesign.

Thanks