- 123
- 272 433
Tyrek Doz
United States
เข้าร่วมเมื่อ 5 ต.ค. 2011
If you want to be fast build a small block ford !
Follow me on Instagram and Snapchat @Reek2Cool ‼️
Follow me on Instagram and Snapchat @Reek2Cool ‼️
ASAG 8.2 Deck Turbo Street Car💨💨 “DirtyBird”
Nasty turbo 8.2 Deck street car know as the “Dirty Bird” making a Clean pass‼️
มุมมอง: 41
วีดีโอ
FBO 5 Star Tuning 10 Speed Mustang First E85 Fill Up/Crazy Pulls ‼️ This Tune Spicy🔥🔥
มุมมอง 341หลายเดือนก่อน
Decided to slap some pump e85 in my bolt on mustang today and go do some small pulls. Before the tune the car would barely spin when doing rolls but now it’s a whole different car. 5 Star tuning ftw ! I definitely gotta get me a draggy and a drag pack to see what it will run ‼️. IG:Reek2Cool #5startuning #E85 #automobile #10speed #s550mustang
GT350 manifold installed on 2021 Mustang GT !?!
มุมมอง 85หลายเดือนก่อน
Pretty straight forward intake manifold swap, the only hard part for me was figuring out how to route the vacuum hoses. (Previous setup was a stock 18-23 manifold and jlt intake)..Big that’s to VMP for getting me a adapter to run a stock throttle body temporarily on this setup ! IG:Reek2Cool
Why I Sold My FBO E85 G37 For A 2021 Mustang GT‼️
มุมมอง 2732 หลายเดือนก่อน
I just had to give my opinion on making the change from a FBO 2009 G37 to a Bolt on 2021 Mustang Gt! Both good cars but if you ask me, I should’ve skipped the Infiniti and got a S550 years ago ‼️ IG:Reek2Cool
Mustang Week 2024 PT2/Picking Up Cervini Hood
มุมมอง 442 หลายเดือนก่อน
Part 2 on my last video walking through the sick bang blow car show, then picking up a new to me cobra r cervini hood !
2024 Myrtle Beach Mustang Week Suck Bang blow Mustang Meet‼️‼️
มุมมอง 982 หลายเดือนก่อน
Mustang week 2024 was a success this year, I had a good time and met some cool people ‼️ #automobile #carshow #mustanggt #mustangweek #myrtlebeach #beaverbar #suckbangblow
2024 Waycross Summer Cruise In/Car Show‼️
มุมมอง 472 หลายเดือนก่อน
Downtown Waycross, GA Summer cruse in car meet. Good show and met some good people!
Picked Up Some New Wheels Just In Time For Mustang Week 2024‼️ Thanks To Deal On Marketplace‼️
มุมมอง 3133 หลายเดือนก่อน
Trying to make some last minute changes before Mustang Week ‼️ check out my IG @Reek2Cool #automobile #carshow #mustanggt #mustangweek
The Rain Don’t Stop Us/Steeda Summer Nights Car Show 2024‼️
มุมมอง 1013 หลายเดือนก่อน
The Rain Don’t Stop Us/Steeda Summer Nights Car Show 2024‼️
Tifton Georgia Cars & Coffee walk through at Prince Chevrolet ‼️
มุมมอง 2504 หลายเดือนก่อน
Tifton Georgia Cars & Coffee walk through at Prince Chevrolet ‼️
Just picked up my 2021 Mustang GT after selling my FBO G37
มุมมอง 2454 หลายเดือนก่อน
Just picked up my 2021 Mustang GT after selling my FBO G37
Performer 170cc or AFR 165 heads which way should I go !?!
มุมมอง 616 หลายเดือนก่อน
Performer 170cc or AFR 165 heads which way should I go !?!
LS NASTY SHOP TOUR WITH LOGAN PART 2‼️(BIG HP)
มุมมอง 568 หลายเดือนก่อน
LS NASTY SHOP TOUR WITH LOGAN PART 2‼️(BIG HP)
Picking up my new to me 25.5cm (BAD APPLE) cage from LS Nasty HQ PT1‼️
มุมมอง 478 หลายเดือนก่อน
Picking up my new to me 25.5cm (BAD APPLE) cage from LS Nasty HQ PT1‼️
Part 2: Slowly making progress with my 89 Mustang GT‼️ Tremec T5z unboxing
มุมมอง 548 หลายเดือนก่อน
Part 2: Slowly making progress with my 89 Mustang GT‼️ Tremec T5z unboxing
Saving my 1989 foxbody that’s been sitting for 7 years !
มุมมอง 1299 หลายเดือนก่อน
Saving my 1989 foxbody that’s been sitting for 7 years !
Found a 2007 Honda trx450r project on Facebook Marketplace for $1000 !!
มุมมอง 87ปีที่แล้ว
Found a 2007 Honda trx450r project on Facebook Marketplace for $1000 !!
Admin Tuned FBO E85 G37 walk around (Daily Driver)
มุมมอง 290ปีที่แล้ว
Admin Tuned FBO E85 G37 walk around (Daily Driver)
1986 Trx250r (ESR363 stroker) budget build update!
มุมมอง 1.6Kปีที่แล้ว
1986 Trx250r (ESR363 stroker) budget build update!
trx363 project bike fired up with the help of ATC Outlaw Trikes !
มุมมอง 8272 ปีที่แล้ว
trx363 project bike fired up with the help of ATC Outlaw Trikes !
2005 Honda trx450r $1200 barn find project!
มุมมอง 1832 ปีที่แล้ว
2005 Honda trx450r $1200 barn find project!
1986 Trx250r trail/drag build update pt3
มุมมอง 2832 ปีที่แล้ว
1986 Trx250r trail/drag build update pt3
@Only1nauti_tv does wheelie on the street with 2018 kx450f
มุมมอง 1522 ปีที่แล้ว
@Only1nauti_tv does wheelie on the street with 2018 kx450f
Suzuki rm85 $400 project bike finally runs !
มุมมอง 1722 ปีที่แล้ว
Suzuki rm85 $400 project bike finally runs !
Ot’s 2018 camaro ss 1LE street pulls/walk around!
มุมมอง 1132 ปีที่แล้ว
Ot’s 2018 camaro ss 1LE street pulls/walk around!
Ponyexpress racing blow through turbo sbf mustang
มุมมอง 642 ปีที่แล้ว
Ponyexpress racing blow through turbo sbf mustang
Bleu steel gsxr1000 makes a clean pass SGMP
มุมมอง 122 ปีที่แล้ว
Bleu steel gsxr1000 makes a clean pass SGMP
Kids playing with their daddies cars
What are you talking about lol
I just put the same size rims and tires on my 20’ F150 tonight. I have a two inch level and it rubs like crazy in the back portion of my front tires.
@@nickgaynier4134 trim it with sawzall or cutting wheel. The back piece should be plastic so it’s a easy fix if I remember correctly
Ford =💩
😂
@Reek2Cool 💩💩💩
Why 5star instead of Lund
@@L42776 5 star has tuned a lot of fast all motor cars, mostly grudge cars that don’t show times though. I plan to run some lund cars when I get a retune
@@Reek2Cool post that if you can thanks
Bro almost made his last video drivin on ice skates. Pulls are tough tho
@@tommvv facts lol, ima put a drag radial on it soon. When it was stock it would hook on street tires but not any more
did you even break 45? all that was wheel spin
@@ir4kk probably not, I started in 3rd on the other video and it hooked up pretty good!
That doesn’t look like the proper pavement to be trying that for the first time
@@jakefox3677 before the tune, the car would dead hook on my street tires
Be seeing this car in a junkyard soon
@@jamesbean9205 i highly doubt it😂
@@Reek2Cool oh cool so a different driver and owner then! Way to go
Auto mustangs are for homosexuals…
Get a rear diff brace one you get the spin ironed out to prevent wheel hop. Play with your pressures too to help mitigate rear sliding.
@@pvega1461 yea I’ll probably pick up the Steeda subframe brace/shocks/ drag radial. If you look at my older videos it was dead hooking on the street with street tires before the tune.
Definitely get it Insta 360 cam
@@Sychohead fasho I’ll look into it, I didn’t expect it to blow tires off like it did. Drag radials coming soon though
I got the same year and bike how does he lift it does he pop the clutch
@@RsN_Psycho-YT nahh bro it just comes up when you give it throttle since the 4 strokes have some torque
@@Reek2Cool so what gear second or first
@@RsN_Psycho-YT I’ll do it in 2nd to play it safe, work the back brake also. This bike almost took me for a ride when I tried to do it😂
@@Reek2Cool same I almost whisky throttled
Your AFRs are severely rich
E-85 is supposed to be around there
@@white_stang007 understood. Thanks!
@@youdrope85 has less combustion requiring more fuel per stroke, hence why e85 has worse mpg
@@white_stang007 appreciate that bro
@@white_stang007 that’s still severely rich
When you spend all your skills points into the car but not driver 😂
@@christopherxiong5980 let’s run it don’t talk me to death😂
Tf is he supposed to do? Get out and make the damn tires hook?😭😭😭
@@cainanbrewer6628 my point exactly man lol, I’ll throw a drag radial on it sometime soon
i think anybody would have trouble keeping that rwd beast in a straight line
No it’s 1000$ car payments cant afford a dash mount for the phone lol😂
Camaros don't do that
Because they’re slow
Anything that is rear wheel drive will do that
@@yuppystick I bet😂
Yes they do if you don’t grip it
Boring
@@deebee68 appreciate you fam !
I’m going there next week and hopefully they can get me right
@@averywright9627 good people man, they got this car moving pretty good just to be a lil bolt on car. I need to get a draggy in it.
Bout time for some big meat Larry Hoovers huh bro lol
Most definitely either that or next time somebody mail box gonna get ran over😂. It’s hard to do a pull on street tires now 🤦🏾♂️
@@Reek2Coolget some r888r you don’t need to get anything else.
@@Illestbuddha fasho they’ll definitely do better than these nitto 555 tires. I’ll have a drag pack soon though
🔥
@@ct4006 if I knew then what I know now that bike would be flying lol !
Is it built strictly as a drag bike or do you trail ride it also? I'm about to tear mine apart and Looking to go in the alcohol direction
@@ct4006 this bike had a stroker crank and 440 big bore kit, lectron 44 carb, ported head. If I converted it to run on race gas then I probably could trail ride it. But on alcohol it would run out of gas to fast to trail ride it.
@Reek2Cool thanks for the info. Thats definitely a bad ass build. Have me rethinking my build and turning it into a drag monster like yours 🤔 😅
@@ct4006 if you like the dirt drags or 1/8 mile racing then go for it, a lot of people sleep on the power that a 400ex can make
What head lights them are
@@dattkiddpolo my pops had found those lights on Amazon, I don’t remember which exact one it was though
@@Reek2Cool10-4 bro my homeboy make them nacelle and I was looking for a nice set of headlights
Can you post a video from behind the handle bars
@@dattkiddpolo is he out of the myrtle beach area if so then that’s him. I’ll have to get a pic or video from my pops. He don’t changed the bike up now and put a 30 on it
@@Reek2Cool yea he is that’s wer in from
My Z is pretty quick it ran good against stock 10 speeds but I also got a Supra I raced plenty 10 speeds . I like 10 speeds pretty cool car
@@6cylinderonly is your Z fbo ? Were you able to record the run ? I did a roll with a new Supra when I had my fbo g37, around 110 mph he started pulling away. I would jump out on the hit though
@@Reek2Cool no my z is bolt on tune 7at and yeah it does jump out my Supra when the my soupra was stock but after 123 Supra pulled up top but a 2021+ stock Supra will always beat any FBO e85 from any roll, 2021 Supras are dead even with a stock 10 speed. My Supra beats any FBO e85 10speeds from a roll until they boost the 5.0 then yeah 😅
@@6cylinderonly is your Supra stock ? I’ll run you just to get some footage cause I don’t think anyone around here has a new Supra. I agree though boost is a game changer I plan to stay all motor until late next year
@@Reek2Cool it’s basically stock just a DP tune it’s all u need to beat a lot of cars also remember not all 6 cylinder cars that have a turbo make same power with a dp tune it’s all base by motor quality and the size of the stock turbo for ex. A Kia stinger even bolt on tune will likely loose to a FBO e85 10 speed gt while a g80 m3 dp etune will crush even a bolt on 85 gt500 😅💀
I need the back tire bro lol
@@252motorsports Shidd we might be a good run though fr, I can’t give you and that monster nothing lol !
@@Reek2Cool we definitely need to try something next time you’re up this way bro. We gone have to run 1/8th I don’t know if I can run a 10 speed with all them gears out the back door lol
Sounds good!
🔥🔥🔥🔥
@@Skychiii3 appreciate it fam ! This was a good running car
🔥 clean bro
@@252motorsports appreciate it bro, I’m slowly making changes on it before I start back messing with the race car
Appreciate you coming up and checking us out. I host this meet.
@@TheGonzorelic fasho man I enjoyed myself, I’ll definitely be at the next one also !
Looks clean I understand wanting to sit on the wheel though
@@RogerDoubleU yea bro it’s gonna have to do until I get some 20s on it but no rush. I just wanted them stock wheels gone man !
🔥🔥
@@Kc_zayy appreciate it fam💪🏾
Hello, what ignition do you use?
@@agustinbrescia5637 in that video it had the stock ignition setup but I did have a hpi ignition setup to go on it but someone wanted it more than I did at the time so I sold it. I might do a banshee next
The car at 7:50 is 👌
Most definitely bro ! If they wasn’t playing music in that area I would’ve took my time and got a better shot if it
Nice i just picked up a 2018 camro 2ss yesterday over 455hp 200mph+ wish i could do a pull wit u
@@vxxes3974 ayeee my boy I picked mine up last week ! Are you in the Georgia area if so we can do it !
This thing is super clean! I’m looking for one myself, hopefully I find one as clean as yours bro
@@kingbb1632 appreciate you bro they are out there, I just searched on Facebook marketplace until I found a stockish looking car for a decent price!
Clean pickup! Excited to see where you take this!
@@jebronjames6063 fasho appreciate you bro, I got a few ideas in mind already for it !
That’s sad
0 turbo whistle
The turbo actually whistles pretty good when I am out cruising around. This was more so for people that want to know how it’s sounds with resonator delete on a cold start
@@Reek2Cool can u hear it outside the cabin? niceee
@@TheLawlessGang yessir, I had put a cold air intake on it and that’s when I started hearing the turbo outside the cabin. I should’ve made a video of it
With a 6 in lift
Got the exact same truck and 22in rims sitting on 35s sits clean always getting compliments on it
I bet it looks good bro, only reason I stuck with the 33s was because it was stock height with a leveling kit on the front. Still turned out to look ok, I might get another f150 and do it again just with a coyote this time around
How is the longevity w/ that tune? Still running the same thing?
The truck was running good I never had any issue, I sold it to a guy about a year ago and he’s been still enjoying it to this day !
170 heads,, i,d port the ports, since they are rough,install newest blend over the n41 cam...ride on that..
The casting definitely is ruff on them so that would help a lot, but would it make it flow similar to the afr165s ? And install what over the n41 cam ? I just got it cause it’s more streetable vs the old x303 cam I had.
I think the AFRs will do better bro. Port geometry seems like it would be better to me. With them bigger intake ports on the edelbrock heads the cross section of the runner prolly gets necked down before it gets to the valve. I’m no cylinder head expert just my .02 from porting a lot of heads 😂
I’m thinking the same I seen what the afr165 head’s supposed to flow out the box but edlebrock don’t have much info out on the performer 170 heads. I do know the AFRs make more power vs them though. I do agree with you though and the casting has ridges in the ports on the edelbrock heads
My question is coming a few years later, but didn't Pro Mods used to have a lot more really cool, exaggerated body configurations? Almost like giant Hot Wheels. It was a really fun class to watch. Maybe it was a different organization than the NHRA, I don't know. Now it seems like they are pretty uniform looking - almost like Pro Stock with bigger blowers....🤔
12 wide and -44 is the dumbest thing ever.
Yep, sure is lol !
Any difference besides looks
Yessir, the 7675 might be good to around 800 hp were the s480 turbo is good to around 1300hp
You teaching me a thing or two just by watching your 5:50 video
Appreciate you bro, the red car that I was building caught on fire. I had a lot invested but and it’s all gone. So this is the start of my new race car🔥
Nice I see some potential already nice video
Hey don't listen to anyone who hasn't owned one of them mosters I had one built a 320 ran on 110 octane with some weird racing 2 cycle oil and when it was cold out she hated to start normally took 4 to 5 good kicks and a lot of preying she wouldn't kick me back I she bout broke me leg 2 times had a bruis across the hole front of my leg for 3 weeks both times
Yea they will definitely kick you back lol, I’m not sure if I want to build another one or get my first banshee, I always wanted to build one of those also
@@Reek2Cool the only thing about a banshee is how short they are its really a chore keeping the front down unless u stretch them at least 2 inches at the swing arm but there also way easier to find performance parts for I know my 320 250r used to blow 420 banshees away on the trails and tracks but in a drag race the banshee would come around on top end so they make great drag quads
@@Reek2Cool a banshee is also way scarier than a 250r because they make awful power until they hit that sweet spot then out of nowhere it's like being shot outta a cannon fastest banshee I ever saw was my cousins dad's it was a 540 with billet everything and he could ride the hell outta it but one night my dad an him where riding trails in the woods an he told my dad he'd see em on the other side my dad said he heard him hit the power band an went through all 5 gears in about 3 seconds then everything went quite the found him smashed into a tree missing his ear he survived but just a point that no matter how good u are they can get away from u quick
That old bell housing is from an SN95 car for the longer input shaft. The old t5 It is either from a 3.8L v6 or a 94-95 5.0.
Old transmission didn't have an id tag on it so that is possible. Was done years ago. Everything seems to be lined up though, if it did have the wrong bell housing the transmission cross member wouldn't line up right ?
@@Reek2Cool I think the difference is 11/16" longer for the 94 and up t5. You can probably put a tape measure on the input shaft to check its length and compare it to the input shaft on the new transmission.
@@sbf_fox2434 10-4 I’ll check it out
Yessir!
Thing sounda crispy asf!!!
Thanks man, I miss that bike hopefully I’ll get to build another one or maybe a banshee soon since I’ve never had one of those
How’s the tires doing? And how’s the ride with the 33s on the 22x12?
Yessir and they road good, my only complaint was how noisy they are going down the road lol
Hes gonna love it when he finds out about the shin digger!!! 😂😂😂
I’m glad he wasn’t strong enough to find out about that at the time😂, he probably would’ve never touched it again and rode off on his 400ex which is electric start lol
When I was 11 I spent the summer in the country my cousin had a 230 quadsport that kicked out sideways needless to say my hole leg was black and blue that summer