วีดีโอ

"I... {wave hand} ... er ... {wavehand} ... um ... {wavehand} ... ". Aaaaaaaaaaaaaaaaaaaaaaaaargh! {Next video}

Thank you so much. I have a doner tool that I found at a flee market and wanted to replace some of my broken tools on my Leatherman. I took it apart and could not figure it out. this video was alife saver thank you again look forward to other videos...

my surge had 9 copper washers, and only 3 steel ones, one of the steel ones was thinner than the other two, my dog jumped on all the parts and I lost the order/placement of them, can someone help me out?

What size security torx bit do you need?

My surge didnt have those washers on the outside bits just the inside ones, i took it apart and wasnt sure were thry went exactly but luckily there was little round marks on the bit holders to show were those washers went. My surge also has a eye glasses bit which i didnt see on yours, that was the reason i stripped mine down because my eye glasses bit broke and was difficult to extract. Thanks for the vid🤙

THANK YOU VERY MUCH. Very informative & detailed video on disassembly & Assembly. I did similar things on my Leatherman Surge Tool & felt satisfied.😊

Awesome, thank you, I needed that. I found a Leatherman Surge, so I don't have the warranty, so I needed to know how to do that. It has 3 broken blades and is missing the screwdriver flip over tool, but buying the missing parts is way cheeper than buying a new Leatherman. You made my day.

Thank you very much. Great video!! Exactly what I needed. I do landscaping so my tool gets stiff from dirt.

This is the kind of detail I like. Subbed

*PLEASE DO THIS SAME VIDEO FOR CHARGE TTI!!!*

How many centimeters are you cutting the heat shrink tubing? for smoothly,thsnks

MashAllah awesome video.

This tool would be great if the stainless steel was good quality.....unfortunately it rusts !!! A stainless steel of a marine quality would have been welcome....

I am surprised that there are rubber and plastic parts. I use my pliers directly in the fire when I am cooking outdoors.

Why not just soak the tool in alcohol without breaking it down? Blow out the alcohol and then put on penetrating gun oil. You are doing more than I do for a gun that I count my life on. Seems like a hobby but not necessary.

Too much oil.

Thank god for the internet and users like you Lo!

Lost me at made in China.. going with eotech

I can't get the lanyard part to stay tight

The gun in the interior pocket is hilarious, not sure thats what Tumi had in mind 😂

7:19 Btw, should be loose.

Nice video, how do does the gun perform, does it shoot well?

Thank you

Thanks for the tutorial. I have an original Leatherman that is very stiff. So this will help me disassembling it, and lubricating it so it functions as new.

How do you remove the lever lock from the handle?

Whats up with the weird camera?

I accidentally dropped out the pin for the removable bit and can opener, and two washers came out with them, but one is much thinner than the other! Does anyone know where to put each one? I can't help but think there's a good reason why they're different thicknesses?

Thanks! I was able to remove a broken serrated blade from my Wave. also I had a modified regular blade that I wanted to put on my new Curl. The blade on the Curl is too long & sharp, and probably would upset the Safety Manager where I work... I had modified the blade on my Wave to a Tonto like chisel, which I use a lot at work to disassemble dispensers. Anyways I was able to get everything back together! Thanks!!! IMHO

Love Malyasian people so good and helpful bless you Malaysia.

Can I take out the pliers and use just the half of my surge ??

1)My edc free p4 with strider. 2)Sprit x with crk. 3)Change tti with hinderer xm-18 3.5. 4)surge with zero tolerance 0562ti

Se me rompió la punta dela hoja filo liso de mi SURGE ,alguna idea de cómo la consigo,donde comprarla.Gracias.

I have the Neo 2, they held fuel for over 3 months. however, overtime the o-ring near the wick will fail (due to heat). now it holds fuel 1 month top. I am not a smoker btw.

Thank you for sharing this. I am going to disassembe my all black and all silver ones, and reassemble a black-silver one and a silver-black one.

The music is far too loud and distracting...

HELLO GUYS PLEASE ... PLEASE CAN YOU HELP ME... JUST BOUGHT A NEW SURGE... UT THE HANDLES DO NOT LINE UP EXACTLY WHEN THE TOOL IS CLOSED... IS THIS OK AND NORMAL PLEASE . ? ? ?

Some people will find that tiny ruler on the P4 useful, it's the right size needed for bolts and nuts. It is a bit stupid though that they didn't make it a micro ruler

Bro you hand same multi tool hand.

Hi bro! Do you mind state the dimensions for both 8 and 6 outlets please?

You can clearly see that Veteran staring back at him, while he is aiming the rifle at him, with an expression that could only say, “Don’t point that Fkn Rifle at me Rag Head! I’ll eat your children!” Don’t aim rifles at people.... loaded, unloaded, prop, or otherwise. It’s just all around bad news. You get an F on this one. Bad! No! Bad! Don’t do that! Bad!

Everyone with this obsession with stiff leatherman pliers !! In 3 days of cutting hard cables, they become super loose. Even too much!! All the leatherman you show on youtube stiff, you have almost never used them !! All my leathermen become super loose in 3 days of use! And in a month they take even a bad play! Stop And swisstool the same. The swisstool in the video hasn't cut more than 10 hard cables in his life, otherwise he would be super loose.

Hello very interesting video! My surge have only one steel washer in the internal tool on the side of bit holder and can opener... and 2 steel washer in the side of awl, large screwdriver and small screwdriver, like you. Than, on the jigsaw holder have 3 bronze washer, 2 on frame side and one on screw side. You have one and one. I think leatherman final assembly workers works with no clue. Or poor QC. In external tools i put one washer per side, and not 2 on one side and 0 on the other. The blades are more smooth and liner lock ingage a lot more solidly and tightly, becouse the blades are closer to the frame.

Thank you sir. I really messed the position of the tools and washers on mine even hough I cleaned it at least 10 times now. All is well and in order and is smoooth as butter, as I use mine on a daily basis and it gets durty pretty quick.

I am pretty sure that taking this apart will Void the Warranty

2:05. That old dude, seeing some brown putz pointing a gun at him. Yeah, I bet he was thinking how much of an absolute dip sh!t he must be.

This video did NOT go over how to properly fit a plate carrier.

Tops oil?

First!

Very informative video! Would you put locktite on the pivot screws, or leave it off due to it free spinning?