วีดีโอ

I think you must love your job if you get to do such cool things. :)

Set the desired text to ‘Annotative’ or set ‘Match block orientation’ to ‘Yes’; you can find these options in the properties panel. Of course, it can also be done using constraints, but that is more complicated.

@@kisminden thank you

@@sahebjan1736 Click on the top of the ViewCube or use the PLAN command and select current UCS.

On the properties panel, one dimension received an mm suffix, while the other received an inch suffix. Since the drawing is in mm, I linearly scaled the inch dimension by 0.039. These properties can be copied, allowing me to dimension using both systems within the same drawing.

@@urosdelic9062 Yes, it is possible, but only with a macro, that is, with the help of AutoLISP.

Thanks!

Try this: add a point parameter, and to the point parameter add a move action so that it follows the center of the line. To do this, assign the aligment grip.

the important thing is to set the same units in autocad and google earth. of course it works with feet/miles as well as meters/kilometers.

th-cam.com/video/5l-NftCqcFc/w-d-xo.html

th-cam.com/users/shortsn5XYDczx3hs

th-cam.com/video/ZEyk4H38abg/w-d-xo.htmlsi=JCAwm1f1MMS41MYk

The basis is very simple indeed. You set the complexity by the number of parameters you put in.

@@kisminden have you done anything for steel structures like knee brace gusset plates

@@advancedautocaddynamicbloc7359 I have a lot of experience in steel construction, but in my work I always have to design a custom plate, so I don't have a block. If you give me the parameters, I can make a dynamic block.

Thank you very much! You know, I'm motivated by two things: one is that I love learning myself, and the other is that it feels indescribably good to share knowledge.

Not entirely. Dyn Input is the function itself. And Dynmode is the Variable that you use to set the modes of the Function.

Glad I could help

It's a very good feeling to know I could help.

Thank you very much!

You do not need to use Dimension, just click on the point in the image. It is important that F3 is off, otherwise the click may go to another point in the image. 1. select the image 2. select the scale command 3. click on the first point on the line 4. press the r key (if you have autocad in english) 5. click again on the first point and then on the second point 6. finally enter the distance between the two points

sorry, you have to press enter after the letter R, maybe you missed it

I am friends with youre daughter hahah

thanks for the topic, I will make a video

Ok sir tq

th-cam.com/video/ZEyk4H38abg/w-d-xo.htmlsi=oyyDgnfbLR_Ljr1D

Please answer me

@@SurveyCivilRakesh I would ask the author to declare whether the script contains a piece of copyrighted code. It is also possible that it does, but that it allows distribution with attribution. I only have one code up for now, there are no restrictions on that.

@@kisminden So sir how will I know?

@@SurveyCivilRakesh you have to ask where you find the code. if you accidentally share copyrighted content, youtube will notify you anyway, you can't go wrong

@@kisminden Whom I will use in Lisp, he will have to ask what is the code?

That's very kind, thank you very much, but I'll stick to the traditional route.

Thank you very much, it's really a pleasure to help! I think the advantage of this solution is that you don't have to embed the coordinates exactly, but then it is possible. Have fun with it!

Definitely yes!

Hmmm for some reason i can not 'insert field' when in the formula bit. I think this might be a mac issue, or does this not work in autocad LT perhaps ?@@kisminden

@@poidura 1. Insert the cursor in the right place. 2. menu INSERT, and than the FIELD option in the drop-down menu

th-cam.com/video/5l-NftCqcFc/w-d-xo.htmlsi=nmVUoORuNev_88r1

It is a real pleasure to have been able to help. I created the video with Camtasia and the audio with Clipchamp. You can find the full tutorial here: th-cam.com/video/5l-NftCqcFc/w-d-xo.html

th-cam.com/video/Rn2vcS8QiFg/w-d-xo.html

hello, what number do you mean?

th-cam.com/video/i_ZMB0AaWrw/w-d-xo.html

th-cam.com/video/5l-NftCqcFc/w-d-xo.html

Hallo, Sie müssen beide Blöcke kopieren, vor allem den ersten, denn er ist die Referenz.

th-cam.com/video/MVoeZayGjbM/w-d-xo.html

@@kisminden Vor allem darf man nicht mit Stg+shift+c kopieren, habe ich soeben herausgefunde, danke !

@@dunoobyduby Das stimmt. 👍

options and then profiles; export the profile you find there. copy the exported file with ".azg" extension. on the other computer options , profiles and import

I'm not a boundary wall expert, but I can try to make a video to show you. What parameters would be most important? Maybe there is an existing table I can use?

th-cam.com/video/jBzY8mGIh-M/w-d-xo.htmlsi=vneaJR2rwdENWSuR

There are many reasons why it may not work. The first thing I would check is the file access permissions. For example, if you are trying it on a work machine, it is possible that it is restricted from accessing the CUI file. Another possible reason is that you are using a profile that does not load the CUI file. A third possible reason is that the key combination or command you have selected has already been entered by someone else. You should also remember that you have to restart Autocad after creating the shortcut.

It's true that sometimes it doesn't give me what I need and I have to make it work like a teacher makes a student work. For example, that's why the uploaded code is not the same as the one in the video.

Does using chatgpt in creating drawing replace manual work in AutoCAD? And why?

Thank you!

Hello, this as DWG is not uploaded anywhere because I am using the school version. But i will upload a video with the full tutorial today. i will send you the link

Hi, you can see the full tutorial here th-cam.com/video/odWBuQRxRFI/w-d-xo.html

Yes, you are right, there are several ways. Everyone can find the best solution for them based on their own experience and taste. My aim in this video was to explain the principle. It can then be simplified, complicated, customised.

@@kisminden i appreciate your tutorial but not many people know this advance level block creations. keep up the good work!

@@simracingelite4004 thank you very much

You can change and create attributes in the block at the time of creation and later. To do this, you need to select the block and go to the block editor instead of choosing to edit the attribute. If you are using the right mouse menu, after selecting the block, choose either Block Edit or Edit in the block panel on the Home tab or the command "BLOCKEDIT" I hope this will help "th-cam.com/video/aRVStl-FWPA/w-d-xo.html"

If you double click on the attribute you will edit only the attribute of the block instead of the block

ठीक है मैं कुछ दिनों में एक पोस्ट करूंगा

Hi, dear Kamlesh, find the full tutorial hier th-cam.com/video/5l-NftCqcFc/w-d-xo.html

@@kisminden thanks 🙏 sir आप का से हो में राजस्थान से हू

Hello, which version are you using? Enable dynamic updates: to automatically update fields, AutoCAD settings must enable dynamic updates. Check the "Open and Save" or "Files" tab of the "OPTIONS" command and make sure that the "Automatic save" option is enabled. or/and MEASUREMENT command: the "MEASUREMENT" command determines the display of values based on the current AutoCAD measurements. Check the "MEASUREMENT" command settings and make sure they are configured as expected. This should be set to 1

Options -> User Preferences -> Right Click Customization - th-cam.com/users/shortsh8tlH8oKaQM?feature=share

Autocad is very versatile. I also learn something new almost every day.

If nothing is selected, you get the default menu. When something is selected you get the edit menu.

Hi, what can i do for you

does not work at all or only in Autocad? at the bottom right there is a hamburger menu so you can display many functions on the lower frame. So you can control the functions with the mouse instead of the function keys. hope I understood correctly

@@kisminden when i click on (f8 all other function keys)( version 2016) button orthomode doesn't work by clicking the mouse only is working from the hamburger menu.

@@dronedrone2077 this could be a hardware compatibility issue. I've read about it before, but I've never seen anything like it. I've only seen it on laptops where you also had to press the FN key. unfortunately, the function keys are not commands to which you can assign a shortcut. I look around

@@dronedrone2077 my last idea. the manufacturer of the computer sometimes adds extra functions to their keys: "intelligent keyboard", "multimedia", "volume", "brightness", etc. it would be worth checking whether you have an application from the manufacturer, e.g. lenovo "my smart settings". there you can turn off these extra functions. if it doesn't work only in autocad, it's probably HW compatibility