วีดีโอ

Help! I cannot seem to get the manual inflation to allow blowing up. No matter how hard I try no air passes through the tube.

I'm confused. I've always thought a windlass is simply a winch for lifting heavy weights (like anchors) and that on a boat there are many types/options including a drum winch or the modern winch with or without a capstan. So what i'm saying is a drum winch is a windlass if it's lifting a heavy load such as an anchor.

What about on Evinrude G2

Simple, clear and very professional. Thanks!

Where can I find this siphon hose? It is really nice.

Ground side switches are always better and safer

What type of sealer did you use for this install?

That setup will still puddle. Terrible demo!

those containers have wrong measurments.

Chains are a game changer! Get yourself a chain..Won't be disappointed.

Ugh. No spring lines.

What if it stick steer on a mercury and the steering rod only comes out one side of the cylinder cables on the other what you got

Do they make a shorter version? My front pole is around 2 feet with the upper deck.

I subscribe I followed the instructions and they were perfect 150 horsepower Yamaha, the only problem is they don't take the whole container I make a I make a hole in the container to train I need empty to put the rest oil😂👍👍👍👍💯🏁🙏🇵🇷

Can I use this to splice off a 10 gauge into a 16 gauge 12v system without causing any kind of heat issues?

Hose kit u getting in auto zone

I pay 29 cuarter

Tracey! Can i syphon munni owta a bizniz wid that gadget ?

I need to replace my antenna. It’s 8’ long. Do I need an antenna that long or will a 5’ work? I don’t use the radio very often.

And flashing the motor this way, you dont need to start the engine, correct?

How much ???

Perfect, Thank You

HOW DO YOU PERMANENTLY ATTACH THE THE HOSE TO THE VALVE I TRIED GLUE DIDNT WORK

What about a fuse

Great, thanks.

Ur high

Thats shows you they sell stuff that not work

Can you fill it with water

So all that soap is going directly into the water? Gawd, how many vest you be cleaning into the water mate?

Can someone help me figure out... How do you keep the tiller of an outboard locked in the center? How do you keep it from turning when motoring? Can you use these while motoring in the water? Im trying to figure out how to keep an outboard locked in the center while motoring.

These have been out for over 20 years😂😂😂😂😂😂😂😂

okay i see what it does? I do have several questionscthe first, These units are made 15mm and 19mm Okay i operate a sluice and as i know I am a hard working minner. Im looking for this type of system but and there is always a but? Can this unit size be made in sizing up to 2 inches the reason as gravity feeds the syphone system i need to feed my sluice from a riverbed,Stream,Creek and when beach mining of course i need to take the water from the shore line That said many sluices are raised on legs and some are highbankers, So the height of the sluice could be as highcto three to four feet of the ground as this,is,a comfortable pitch to work on the flat surface, Okay i have,a,system it might work,,but i need a bell end the in a variety of sizes mainly inch and a half They S's at on gravity fed system the wider the diameter of the pipe the more faster and the more water flow,,okay its obvious more water willventer under suction and gravitational force, The other issue is gravity feeding the water to the required hightvofcthe sluiceci operate at four feet,, so this would be the water lift needed between 2meters Two meters being where the pipe connects to the sluice back to where it will assend so this is only a short distance to overcome, So i am thinking can the gravitational force overcome this problem to feed the sluice,,thus if not what can be added in the line,,lets say a valve, or some form of pvc suction pump valve that operates from the energy produced to say comfortably get over that radiouse of climb. I no the pipe would need to be longer to support gravity push, im thinking once over these hurdles gravity does everything to feed the sluice comfortably,,. Lets see what you come u with as we do need,to achieve lift to the sluice, .

Will it stop steering if low? Ty

Ok, I want oars for my 30 foot lobster boat. 9.5 feet x 12= 114 inches. /2 +2 = 59. *25/7= 210.71 or about 17.5 feet.

I’m pretty sure seachoice makes fuse panels and inline fuses as well.

how do I splice say two 12 gauge or AWG wires into 1 12 gauge AWG wire? As well as protect to and seal it via heat shrink it or plastic dip it or both or electrical tape it? Or for speakers

Hey there. Just wondering, can I use your electronic fast fall system if I have a winch from a competitor?

Damn that’s way easier than applying layers of glue like other videos

저는 27피트 일본 야마하 YFR27 어떤제품이 맞을까요? 설치는 개인이 하여도 돼는지요? 구매하는 방법도 알러주세요

Mine is brand new and the lock broke. I cannot get my fuel cap off and am stranded. Thanks a bunch. Nobody is helping me

I need to make a plate to allow for mounting mine. My trailer has no tounge like yours it’s all 6” frame all the way to mounting hardware. I can’t find another option to mount it to the 6” aluminum frame. I have a float on trailer and can’t seem to find anything that will work besides fabricating my own mount. Any ideas? Mine looks just like yours up to where you butted the plate to so essentially I have no skinny tube on the tounge, I need a plate over 6” and then I’ll need bolts over 8” to go across the 2 i beams.

Thank you so much . This is the first video I’ve watched and you went straight to the point . As someone said you didn’t tell us your family History

Such rude comments! I wanted to know more about how you’d bolt it down to the floor, myself.

If my math is correct, these measurements for inboard oar length will extend beyond the center of the boat! Would you please explain why? Seems this would cause mashed thumbs!

They will slip unless you tighten them down tight enough to crush the rails...pos

I use a sharp blade to cut rope then use this tool to seal the end. Perfect every time.

How to attach power and control cable to elec winch model 52111

Simple and complete!!

Whistles with balls in them have operational issues and that is why it is better to use ball less whistles such as the Storm, Windstorm and etc.

I have a 1999 Seaswirl striper 26 ft. What type do you suggest .