- 20
- 46 803
Overdrive Motorsports
เข้าร่วมเมื่อ 3 ธ.ค. 2020
Overdrive Motorsports is a full service kart shop that services the Alberta market with at-track repairs and at-shop race prep. We offer modifications, engine service/setup/rebuilds, and consulting services for competitive racers and race teams.
Joey began karting at age 9 in the Junior 1 Category at Kart Gardens International, near the Calgary Airport. He started shifter karting at age 14 in the 80cc Junior category. He opened Overdrive Motorsports in 2001.
Joey began karting at age 9 in the Junior 1 Category at Kart Gardens International, near the Calgary Airport. He started shifter karting at age 14 in the 80cc Junior category. He opened Overdrive Motorsports in 2001.
2024 Ventesimo Varsity with TM R2 shifter engine
Made with Film Maker
play.google.com/store/apps/details?id=com.cerdillac.filmmaker
website name
www.odkarts.com
play.google.com/store/apps/details?id=com.cerdillac.filmmaker
website name
www.odkarts.com
มุมมอง: 558
วีดีโอ
2023 Praga Dragon EVO 3 single speed
มุมมอง 3257 หลายเดือนก่อน
2023 Praga Dragon EVO 3 single speed kart used 4 days. just add your engine and go. #praga #rotaxmax #iame #x30 #kart odkarts.com/products/2023-praga-dragon-evo-3-used Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
Praga Dragon/TM R2 KZ shifter kart by Overdrive Motorsports
มุมมอง 8Kปีที่แล้ว
The possibilities are endless at Overdrive Motorsports. We can build you a custom go-kart (including shifter karts) in any brand, colour or combination. This kart is a Praga Dragon with TMR2 KZ engine. www.odkarts.com Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
Ventesimo KV206 Briggs & Stratton Jr. 2
มุมมอง 327ปีที่แล้ว
Ready to race, new Ventesimo KV206 with Briggs & Stratton engine odkarts.com/collections/new-karts/products/ventesimo-kart-j2-briggs Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
Praga DD2 World Finals Kart
มุมมอง 1.8Kปีที่แล้ว
360 degree view of 4 day old Praga with DD2 engine raced at the Grand Finals. odkarts.com/products/2022-praga-grand-finals-dd2 Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
Praga Monster Cadet/Rotax MiniMax Grand Finals Kart
มุมมอง 874ปีที่แล้ว
Own this today, 1 available for purchase odkarts.com/collections/used-karts/products/2022-praga-grand-finals-dd2 Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
Tucson road trip COTA 2023
มุมมอง 337ปีที่แล้ว
watch Team Overdrive travel from Canada to the 2023 Challenge of the America's Tucson opener @aeromarketing @challengekarting #cota2023 @ruthlesskarting www.odkarts.com music cred think tank film maker @ventesimokart Made with Film Maker play.google.com/store/apps/details?id=com.cerdillac.filmmaker
2023 Rotax DD2 Evo Kart Dyno Session
มุมมอง 499ปีที่แล้ว
www.odkarts.com overdrivekarts Watch us do 2 pulls on a DD2 engines at the professional set-up of www.dynoplus.com For information on Rotax engines please go to www.kart-rotax.com
December 29, 2022
มุมมอง 335ปีที่แล้ว
Edited by YouCut:youcutapp.page.link/BestEditor @RotaxKarting @odkarts we show you how to look at your dd2 clutch www.odkarts.com Overdrivekarts?mibextid=ZbWKwL
Matching a piston to a replated cylinder
มุมมอง 627ปีที่แล้ว
Edited by YouCut:youcutapp.page.link/BestEditor watch as we un-pack a replated #tmracing cylinder from @STP1958 #stp1958 #dcbtech https.//odkarts.com/collections/tm/products/dicarmine-tm-piston IG: overdrivekarts FB: Overdrive Motorsports WWW: odkarts.com
Rotax Max carburetor assembly
มุมมอง 948ปีที่แล้ว
we have an in depth assembly of the @RotaxKarting carburetor Part numbers we will be using 150 needle and seat 261880 Float height gauge 277400 Complete gasket set 293834 www.odkarts.co.
Rotax Max Carburetor Disassembly
มุมมอง 3.6Kปีที่แล้ว
In this video we fully disassemble a Rotax Max FR125 Carburetor for competitive kart racing www.odkarts.com Tools used: 12mm wrench 4mm allen wrench Flathead screwdriver 19mm wrench Narrow flathead screwdriver Measuring calipers Side cutters Dental pick
Very good video, might have been a bit to hard on the 17mm.. gonna be a little easier on that one from now on 👌🏁
Your video is very good and I always follow it. I have a Rotax Evo, and it's not going above 94km/h, I noticed that the valve isn't opening and closing correctly, I've already cleaned it and it's still not working. Do you think this is limiting the speed? as it reached 110km/h. What do you advise me to do? Could it be an electronic problem? Is there any electronic test that can be done? Do you have a video about this? big hug
Great video ! THANKS Small question: I manage to do a little bit and then I have to open the choke a little and then close it, to be able to do another little bit. I don't understand, the engine is jamming and I'm still playing with the screws. My air screw is about 1/4 turn and it doesn't work otherwise. Could it be the needle and how do I know that it is no longer good? I demonstrated the entire carburetor the other day, checked everything and everything looked and very clean.
How much a kart like this or this one?
depends on brand but i just looked up Tony Kart and it was 13,500 USD.
How many hours has been done before overhal?
What's this worth guys please??
What's something like this worth anyone ive been thinking about getting into it to replace my 2023 yz450f
Thats! Cart it's Not bat & fast fore sure.
What type of oil you put in the Rotax DD2 gear box?
We use 150mL of Motul Transoil 10W-30
We have done it!
would look better with a Moto in it :)
can someone send me engine overhaul mannual pls
www.rotax-kart.com/products/125-senior-max-evo
You can find it under downloads on that link
Great video Joey!
Glad you enjoyed it
Awesome editing work!
We hired a new editor in the fall. She's doing swell
@@overdrivemotorsports1442 she seems to be a great asset to the team!
The nozzle is dp267, the mandatory one. Where do you race and what settings do you use?
What are your nozzle sizes? I'm having trouble adjusting.
Hello, The nozzle size must be DP267, where are you located and what problem are you having
Nice work for test, but i'm really disappointed for kzr1, only 44 horsepower while is publicized with 50 +
Thank you for the reply, of course the factory and different dynos my read power at the crankshaft while we read at the countershaft exiting the transmission
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️☺️
❤😊❤😊❤😊❤😊❤😊❤😊❤😊❤😊❤😊❤😊 ❤😊❤😊❤😊
hi! where i can find it? thank you!
What lamda value is best for these engines?
mine isn't starting it has been left over the winter and the carb was drained but i didn't remove the jet. any tips for where to start. it cranks and doesn't turn over freely but it just doesn't start. any tips? also do you have a website because i am looking to get a basic rebuild as im getting some oily leakage from either the power valve or head gasket.
Thanks fort the comment. our website is www.odkarts.com If the engine doesn't want to start, sometimes the needle and seat in the carburetor can be stuck closed. Typically a quick dis assembly and re-assembly of the carburetor will do the trick. Try some WD40 on the inlet needle. Please make sure the battery is fully charged and holds over 8 volts when cranking.
What is this kind of wrap called? I’ve been searching for it online but I’m not finding it
Great video, very clear ...
Glad it was helpful!
Could you do a full rebuild video - both top and bottom end?
Thank you we will put this on our task list
How about giving us a clue about power figures?????? And turn your camera 90 degrees...
where can I buy such a piston, write to rxwielo@gazeta.pl
Great video! I like how you explain things 👍🏼. Do you know what compression a Rotax max senior should run at if it is a healthy engine? And if the compression of an engine is in the healthy range does this mean that it shouldn’t need a rebuild Imminently, if it is being used by a weekend warrior like myself? Thanks, Will.
Hi Will, Historically we don't do compression tests, but you see minor performance loss at the 10 hour of use mark, then quite significant at the 30 hour mark. We do have some decent used parts if you are just trying to keep the engine running
How much hp?
Great video! Great tips! Thanks!
Thank you, we will be rolling more out as our in person seminars are delayed until after covid
That’s some nice music coming from the dyno room
we love it!
OD power is #1 👌