วีดีโอ

Hands down, paid Polaris advertising. Total phony transparent bias. Kept on saying, because his wife likes it more. Useless video.

I was looking to see if the 800 would be better for blowing snow than my 600. Seems about the same for light snow under 4 inches which is the max for me with the 600. 800 definitely looks to work better for a larger pile of light snow, but I would probably just use a shovel or snowblower at that point. Thanks for the video

Did you quit selling firewood?

Thanks for the video. I’m wondering how the Fuyu keeps fine snow dust out.

if it's cold weather, leave the Polaris run. they won't start in cold weather.

For your doors! th-cam.com/users/shortsJcc_C4VcxZc?si=eYntTdLnRrEIawhK

At the end I think you meant that's all u wanted to say about sleeping in a flipover not in a hub. Or IS that what u meant.?

So is it your state laws that govern you rig or the state you traveling through?

😂😂😂too$$$ go cf moto much stuff for less$ and 5years warranty

I currently have a 22 Northstar Ultimate. All its use is on a cattle Ranch, I can't say anything bad about it. I'm not afraid to try something new so Yesterday I tried the Defender, I just didn't like it

First time looking at your channel.... that is one sweet setup you have... Just a suggestion (from a Canadian rockies 50-year Fisherman)... get yourself a diesel heater... i finally bit the bullet this year and got a cheap one (after years of using propane).. my son and i had a close call last year, and i didn't want a repeat ever again (it only takes once... we got lucky)..... i have used diesel heater in minus 20 Celsius in a bad wind... never missed a beat ( i did some mods out of the box to make it dead quiet for ice fishing...i fish a LOT For spooky trout)... it costs a quarter of propane to run... and is crazy efficient... its 100% dry heat.... i keep it outside my 6 sided hub so no worries about air problems (we tested with oil field gas tester).... ONE OF THE BEST INVESTMENTS IVE MADE FOR ICE FISHING... Will never use propane again... check it out... you wont regret it. Merry Xmas and happy new year to you and yours Tight lines in the new year.. From my overtaxed, undersized, lob-sided igloo on the mountain in alberta rockies Canada 🇨🇦 P.s... if you decide to go the diesel heater direction, hit me up and i will let you know what i did to make it 90% quieter.... and only cost was a roll of black electrical tape and a half hour of time...LOL

Great video ! Really like your setup and your SxS setup ! I have a Otter Cottage X over pro so I’ll be sleeping on shore LOL 👍👍👍

nice vid may i ask why you use a livescope and a hummingbird?

Does that topper stay on when you trailer ?and you don't worry about it blowing off?

You think your the coolest guy on the lake and then this guy shows up! 😀 Are those the standard tires that come with that Ranger or did you upgrade?

Buy a car this is not a UTV buy a car buy a truck

Beautiful machine. Discounts on a new 2025?

Bought these. Had them on for 20 minutes. Took them off because my hands were freezing. They're exactly like all other cheap leather gloves. Only good above freezing. Well duh. Superior insulated rubber gloves are warner than these. I don't know why people keep saying they're good when they're garbage. Just get puffy, thinsulate, full rubber palm and backside snowboarding style gloves and you'll be good at temps well below freezing. It's physics. Dead air space, thinsulate for thermal wind break (no different than the benefits of a windbreaker jacket), and aid in heat retention, and full rubber for waterproof (water resistant is NOT the same thing) This isn't rocket science. Your checklist: - Full rubber outer (no leather on planet earth stays dry) - thinsulate liner - fleece inner - puffy style That's it. That's what you need if you're seriously trying to keep warm in VERY cold temps well below freezing. Anything -5 and above freezing is any generic glove like this, but even then, get full rubber outer with fleece inner and thinsulate. You just don't need puffy. Ironworker, mechanic and construction worker my whole life. I've sorted this out a long time ago over years of trying everything under the sun. The best gloves have the checklist, and you do NOT have to pay big money for them. They're work gloves. You're going to beat the shit out of them. So find a pair you like, buy 5 pairs, and forget about, lol. If you want a good pair of gloves by this company, the Kinco, full rubber Hydroflector thermal knitset gloves (model 1784P) are the best I've found for around freezing. They look like any other rubber winter glove, but you'll see what i mean when you put them on. The dexterity is fantastic. I had milwaukeea, dewalts, carhardt, you name it. In time i dwindled the pack down to these. As for very cold, there are tons of gloves with the checklist I mentioned. Brand doesn't matter. It's the checklist that does.

Find your inseam and you’ll not need to guess what bar would be best for you to stand up and buck.

Just had a customer come in after a day spent in the Ranger. Had a ton of negative feedback about the seats. Said he can’t wait to buy a Defender again.

What are you going to do if your trailer just take the cover off?

What was the price?

Bias much?

At 6:45 in the video - how did you connect the 1" ball to the glow cup?

Edition

Polaris will be in the shop. Defender by a mile.

Where did you find the mesh bungie thing for the top of the monster box? Thanks in advance. Was it an otter item or just aftermarket

Would rather hear the saw running instead of music after all it is a saw video but thanks for the effort.

I keep a 3 ft 4x4 with a small scrap of wood screwed to the bottom 2x4x4 and another on the top in case I get stuck , just drill a hole 20 yd out insert the 4x4 down the hole so it catches under the ice and run your winch rope out and pull yourself out

i have the polaris 2023 northstar and love it

salt eats aluminum too

What kind of jeans are those?!

Nice setup! What I didn't understand was the not towing sled due to vibration and your electronics? Is the concerning vibration from towing sled only an issue if you are putting your gear in the sled for transport or are you saying the vibration from towing translates to the ATV and gear in the Otterbox? I see a lot of guys towing their sled vice hauling it like you are so curious.

Lmao! The 261c with a 20" bar is a great comfortable saw for any task. I own & run that. I can't afford the 500i But I guarantee I'd be running over 30" on it for taking down timber, not for bucking fire wood

Chains help but they beat the hell out of nice tires.

My 500i with a 28” tires my back out less than my 271 with an 18”. Wanted a 25” but all they had was 28” and I don’t regret it one bit.

How are these in the winter or rain any grip on them

Wheres the Honda?

I’ve had a few pairs over the years, but I sure wish they would lighten them up.

Thinking of a cargo trailer for storage and probably storing tools, etc.

First off, you didn’t show all the storage on the defender, you don’t need to take it dealer to shut the wrench off, can am 4x4 system is far better with the smart lok. The locking doors don’t make a difference. Not a very well educated video. Also if you had a 2025 defender to compare to a 2025 ranger you would have had locking doors on both machines. Just sayin….

Great video!

What size trailer is in the video? Width, length and interior height

2025 defender for the win.

Do they make one for a Honda 520 pioneer?

That was literally the worst piece of wood in the whole pile. Rotten and dirty inside. Chain was smoked immediately.

Nice and seemed reasonable until I seen the accessories were sold separately and the shelf is damn near half the price of the whole topper.

You don’t mention why this trailer is better for your setup. I have a custom build on its way in early January. While a SXS may fit but you have to remember that after you drive it in, you still need to get out. The best trailer for me is an 8.5 x 16 with taller height and a beaver tail and a ramp extension and dual axle. I live in Arizona so salt isn’t an issue. Thanks for sharing.

How many ice rods do you use?

I’ve been watching you since your 4 wheeler demo videos and that Ranger is a Cadillac !! Nice looking system for sure ! 👍