![Da WEIRDxONE](/img/default-banner.jpg)
- 13
- 40 344
Da WEIRDxONE
New Zealand
เข้าร่วมเมื่อ 12 ก.ย. 2021
Hey, I ride a 2008 Suzuki GSXR 750 and a 1995 BMW F650. I will be posting everything from a bit of car fixes, motorcycle fixes, how-to-videos, travel videos and anything else I feel like sharing with y'all. Hope you enjoy the content!
Servicing a Buell XB12S / Replacing Engine oil and Primary Casing Oil
Here's a bit of hacks to do your oil changes without making a mess or spending money on special tools.
Using Motul 20w50 Semi Synthetic on this bike which is rated for both engine and primary casing.
Using Motul 20w50 Semi Synthetic on this bike which is rated for both engine and primary casing.
มุมมอง: 801
วีดีโอ
2016 Kawasaki Z1000 - Clutch Hub Replacement and Solving Dry Clutch problem
มุมมอง 4K2 ปีที่แล้ว
This video takes you through how to replace your clutch plates, clutch hub and how to solve the issue of your clutch running dry.
Replacing Buell XB12S 2009 drive belt
มุมมอง 1.4K2 ปีที่แล้ว
This is a intermediate level job. Just have your imperial tools ready and you'll be done before you know it!
Replacing Fork Seals Kawasaki Vulcan 650 ABS 2019 (Common for 2015-2021)
มุมมอง 3.2K2 ปีที่แล้ว
This video gives you a detailed step by step guide on how to change your fork oil seals. I used 10W oil on this and the fork tool was obtained from Ali Express
How to change front brake pads on your daily driver / Honda Stream RSZ
มุมมอง 1.5K2 ปีที่แล้ว
How to change front brake pads on your daily driver / Honda Stream RSZ
How to change rear brake pads on your daily driver / Honda Stream RSZ
มุมมอง 1.5K2 ปีที่แล้ว
How to change rear brake pads on your daily driver / Honda Stream RSZ
How to do Oil Change and a Coolant change on a Kawasaki Vulcan 650 2015/2016/2017/2018/2019/2020
มุมมอง 2982 ปีที่แล้ว
This will be the same procedure throughout all the years mentioned in the title. Hope this video helped you DIYers :)
Unboxing and Setting up Stanley Tool Box
มุมมอง 1322 ปีที่แล้ว
Can definitely say this is one of the best budget tool boxes around and if you're looking to set up your own private workspace, this would be a good start!
How to clean and tune Honda Shadow 750cc 2005 Carb
มุมมอง 9102 ปีที่แล้ว
This gives you a guide on how to dismantle and tune your Honda Shadow 750cc carb with standard jet sizes. Where tuning with standard jet is not enough, you can play with the main jet sizes and observe the results.
View like these are why rural roads are a bliss!!!
มุมมอง 372 ปีที่แล้ว
View like these are why rural roads are a bliss!!!
Riding through Waipoua Kauri Forest, New Zealand
มุมมอง 682 ปีที่แล้ว
What a ride this was! I went through this forest towards end of winter so the road was damp enough to be slippery at some points, so if you're planning to take this route, especially on a sports bike, make sure you got proper tyres haha and of course pay attention to the road, other than that it's definitely a serene ride!
Solo travel to Matauri Bay, New Zealand
มุมมอง 1272 ปีที่แล้ว
Last few minutes of a beautiful long ride. A quick walk from the car park will take you to Rainbow Warrior memorial
Installing a Sub and AMP in BMW E91 with no stock amp
มุมมอง 26K2 ปีที่แล้ว
This video can be used on any E90/E91/E92 where there is no stock amp available to tap into. This guide can be applied to any car in general, although running the power cable through the firewall into wherever you want the amp installed will be a different method.
What size allen socket?
What is the size of the Allen to remove that bottom Allen screw from the fork ?????
how do you control the bass and can it be controlled from the radio?
Thanks bro great job 👍🏽👍🏽
Where is the remote wire connected?
Where you conected remote bro??
Haha, simple, thank you your video 😁👍
I did exact the same but it didn’t work
my door speakers arent working after doing this
Appreciate you man, glad people still make videos to help out
Where do you buy parts for it ? Also does it use same part with civic?
Great video! Where did you connect the remote wires to? Thanks
What song is it your playing at the end??
my 05 XB12R was 2 to 3 deg advanced from new. Used to ping and drive me nuts. I finally got sick of it and drilled the rivets and reset it. Runs real nice now.
Have you replace the lower arm bushings?
Thanx! 🙂👍
Thanks so much for this video, we had a hell of a time with the bottom bolt, spinning, had to use strap with ratchet to compress the shocks down to about 13.5 inches of the shock then the screws came out with a air impact driver. Couldn’t have done the job without this video thanks! Now putting the bike up for sales!
I'm glad you found it helpful 😊
@@daweirdxone2936 i had rite job with that bolt they put tread lock on at factory
hey where do you live? i need help finding honda stream parts overseas. there could potentially be some good money in it for for you and i. i know its a long shot but idk how else to do it.
Can you provide any links to the special tools used, like the magnetic thing used to hammer the seal back in place?
Great video!
Hey bro. I have the same bike. I'm having trouble with the seat. Are you able to help?
Where did you get the power for remote wire what usb cable ❤
Good enough for me. thanks for sharing and great job brother. Now i know i can do it myself
Can you please state the tools that you used. Thanks bro
Since this has been a while ago I can't remember for certain. But to remove the bolt on the caliper you need a 14mm socket or a spanner and the bleeder nipple would be a 10mm spanner
So ill just open the bleed nipple for few sec and tighten it again
Thank you
what kind of cable is it that you soldered to the integrated subs? was it acoustic cable?
Speaker wires. You can get twin core ones in 2mm and 3mm. I believe I used 2mm but I can't remember exactly
@@daweirdxone2936 okay thanks
“Got to put this in there” “move this with those s”. Learn the parts if ur really knowing what ur doing! Some people don’t know what “this” or “those” are.
This was the most helpful tutorial on TH-cam. Thank you.
Brilliant video. I'm planning to do this soon. After you soldered the wires did you plug it back into the under seat sub?
@@PasanDias Thanks for replying! Ok cool. I'm doing the exact same thing on an e61, from the UK so mine doesn't have the built in amp either.
I've never done anything in regards to wiring before, do you have pictures/video of you actually doing the wires. Thanks
I don't have a video at the moment. But will upload a video tomorrow with some quick tips on how to solder and splice into wires :)
@@daweirdxone2936 Brilliant! Would be handy! Just want to see exactly which wires I'm doing for this job in particular. Could I not just crimp the wires?
@@bilalahmed2386 as it is a different model that you are working on the colors on the wires would be different, however, there would be only 2 wires that's running to your speakers as well. you might have to use a wiring diagram or a multimeter to distinguish the negative and positive terminals. negative terminal is usually colour coded with black or brown. as for connecting wires, soldering is a personal preference, however you can use tap ins such as a quick splice connector and would save you from having to solder wires.
Can I just run off the right sub? Will it still work ?
Yeah it will still work but the quality will be greatly reduced
@@PasanDias this is the issue I’m having. I ably have mine running from my drivers side and it’s not giving g it’s full potential. My weekend job this week to get it done properly.
@@liamwellsbury4280 exactly. if your head unit allows, you can balance the audio output to your driver's side and you'll see the quality slightly improving
dude, you saved my day! i have a e90 325i Sedan, without amp, and was going crazy about where the wires was! BIG thanks
Glad to have helped 👌
Hey I think I have your old bike
Bro... mines close to that one too. We should hook up.
g how much for a dry clutch installed on a vtr250 and does it help pop wheelies? Asking for a friend.
I can drain your oil and make your clutch go dry? Our giant friend will pop wheelies on the vtr just give it to him 👀
🏍🔥
You got 4 channels amp run for twin Sub. I recommend you to get 2 channels amplifier for your twin Sub it will give you full of power. At the moment you only use to channels from your 4 channels amp.
Thank you on the suggestion. I had this amp with me for a while and definitely don't feel the power dropping and is pretty good quality. but next time I'll keep your suggestion in mind 😊
Just bridge the connections and get the full power.
Gud one ❤️🔥❤️🔥❤️🔥❤️🔥
Thanks you
God I just imagined myself riding with you .. dam.
someday again bruh!
Omg this road is beautiful!
northland roads are absolutely gorgeous mate!
That looks so cool🥺❤️
<3 <3
This is called, "Eat my dust" vibe😁❤️👊
❤❤❤❤
<3
Keep at it my man! 🍻
thanks bro <3