- 9
- 42 744
3D Bunny
Canada
เข้าร่วมเมื่อ 8 มี.ค. 2019
Like a ski bunny, but for 3D stuff.
The Electrical Tape Method for Cardboard Filament Spools - 3D Printing
You may have already heard, but the Bambulab AMS unit doesn't play well with cardboard spools, from slipping problems to dust inside the unit, while cardboard spools are becoming more and more popular. It's not an ideal situation, and so to overcome that, I wrap the edges of spools with electrical tape.
I have tried other methods like printing the rings for the edges, and I found it finicky, and I didn't like having to wait to print more rings.
Electrical tape has been quick & easy to implement, lasts as long as the roll lasts, and has caused me no problems while printing with the AMS.
I have tried other methods like printing the rings for the edges, and I found it finicky, and I didn't like having to wait to print more rings.
Electrical tape has been quick & easy to implement, lasts as long as the roll lasts, and has caused me no problems while printing with the AMS.
มุมมอง: 1 638
วีดีโอ
Assembling my 3D printed mini dutch oven container!
มุมมอง 2355 หลายเดือนก่อน
You can support me by buying the STL to make your own on Cults here: cults3d.com/en/3d-model/home/mini-dutch-oven-dollhouse-cooking-pot-removable-lid-the3dbunny 3D Printed on Bambulab X1C with Prusament PETG in Chalk Blue. Printed at 200% of the original file. The pot itself was modelled in Fusion 360. I made it such that the lip of the lid can be printed separated and glued after to have a cle...
Pink Analogue Pocket and Hard Case Unboxing
มุมมอง 1.7K6 หลายเดือนก่อน
Unboxing the Pink Analogue Pocket with the clear hard case. First gameplay with Gameboy Advance game Texas Hold'em Poker cartridge. Sorry it's not something cooler like Pokemon, haha! After years of trying to get my hands on the white one, they release a Pink one and it couldn't have been a better match for me. Love this thing to bits.
3D Print Timelapse - MSCHF Big Red Boots (Mini) - Bambulab X1C
มุมมอง 9248 หลายเดือนก่อน
The infamous big red boots from MSCHF, but in Mini, for your fingies. Took about 3h to print all the pieces on Bambulab X1C. Designed by @Bigovereasy STL here: www.thingiverse.com/thing:5859535
3D Print Timelapse - Stackable Crates - Bambulab X1C
มุมมอง 2.4K8 หลายเดือนก่อน
3D printed on Bambulab X1C. Each crate took about 3 hours. All printed in PLA. Making these stackable creates: www.thingiverse.com/thing:4734271
Satisfying 3D Print Timelapse - Poop Chute for Bambulab X1C - 4h in 30s
มุมมอง 3.6K8 หลายเดือนก่อน
Printing this poop/waste chute to collect my printer's "poops". Printing this file from makerworld: makerworld.com/en/models/24390 Took about 3 hours to print the slide, and 1 hour to print the bin. Total time, a little over 4 hours. Didn't print perfectly, but as it will be mostly hidden, it's perfectly fine for my needs!
3D Print Timelapse - Fruit Fly Trap - 1 hour in 10 seconds
มุมมอง 2.1K8 หลายเดือนก่อน
On Bambulab X1C. Fits on a typical mason jar. Printing this Fruit Fly Trap: makerworld.com/en/models/16444
How to Add Text to Surface in Fusion360 | Flat, Curved, Sphere, Irregular
มุมมอง 27K3 ปีที่แล้ว
Learn how to add text to a flat surface, a round surface, a sphere, and an irregular surface on objects in Fusion360. These same concepts can be applied for an image or logo (just import an svg image in your sketch, then use that profile for embossing/debossing). I'm not an expert, this is just how I do it and hopefully this can be helpful to you too! Timestamps: 0:00 - Intro 0:26 - Flat surfac...
More tutorials PLEASE you produced one of the most informative tutorials I have seen on Fusion 360. Well done no silly male gimmicks just good technique. From a bit of a Neanderthal male, Keep up the good work, and let us all enjoy some more.
Nice
Thank you for this video. This is the first video on this subject that really worked for me.
Thank you so much... I tried some kind of screw adapter and it just did not work at all. This 30 second hack worked instantly.
You could try tape and the the rings. The rings won't slip, as the tape keeps it in place, and they're more stable than just the tape.
Genius. Thanks, you saved my bacon! edit: What also helped immensely, at least for me, was chucking in a couple of electrical tape rolls on either side of the cardboard spool. Doing this braces the cardboard spool in place, against the adjacent spools, and stops the cardboard from jumping and skewing to the side and jamming itself against the AMS motor.
I don’t even have a Bambu printer and I love this hack. Thanks!
I printed the spool adapters as well and was still having trouble with the cardboard spools feeding properly. I can't wait to try this! Thanks for the information/hack!!
Thank you for the good idea. How wide is the tape?
3/4"
How about "text on path" ... also possible on a sphere. draw circle from the top... and text on path...
Very good tutorial I understood everything, other people go fast to pretend they are so intelligent , and one can not learn from those people. You have a gift for teaching.
Thank you for sharing this I am going to give it a try we have 20 rolls of the Eryone tried spool adapters but they just come off in the AMS. Hopefully this will work which will save re spooling 20 rolls! :) thank you :) x
Great hack! The amount of filament and power saved by simply not having to print spool adapters for every other brand that uses cardboard spools is amazing. Thanks :D
Wow, this is great. I have been printing spool adapters, rings etc. I just tried this with a cardboard spool and I am floored. It works!!!! I’ve had my X1C since the kickstarter and I only wish I knew this then. I would have saved several spools of filament. Thanks so much😃
Yay! Glad I could help!
That's an awesome idea! Thanks for sharing!
✌️
That is adorable!!!
🥹
I know you did this video a while ago, but I just wanted to say that your instruction on how to do this operation was so easy to follow and understand. Some people just know how to instruct and you have that gift. Thank you for this video. I'm hoping you do more of these in the future.
love my pink, by choice at 8:01 btw
I got the Orange, friend did too. Its less the Gamecube Spice Color, and more like Kraft Dinner/KD Cheese Powder color lol, but, I'm still stoked for it! The PWRUP Grip is my next get, it looks freaking awesome and comfy! Nice get though, my first Gameboy Color was the Hot Pink one, way way back when (on release!)
Ah yes, the pink pocket I play contra on. Too bad the other colors sold out, but I don’t mind the pink.
😂
congrats on your purchase. i was tempted to get the pink one but ended up choosing yellow since my first GameBoy was the Dandelion GameBoy Color curious on your thoughts on the hard case? it looks sturdy enough but i’ve had bad luck with acrylic cases scuffing and damaging the shell/screen of my devices if they’re chucked in a backpack when i’m traveling and on a bike or lightly running. any thoughts would be appreciated!
I have had a pocket since launch and the hard case has kept my pocket very safe in bags. It is more for display but it is also actually designed very well for protecting the device. Interestingly few people have commented on some specifics of the hard case design. It has four raised plastic pins on the inside that slot into the back of the pockets four corresponding slots. There are also four small raised ridges on the screen side of the case that stop the device bumping on the front. So basically 99% of the device cannot touch any of the plastic case even if you were to shake it violently and thus the device cannot be scratched or damaged. The only flaw is the latch mechanism to open and close is relatively weak. So a drop from any waist height would likely cause the case to open and the device would fall out. Hence it wouldn't be my choice for real protection on the go but it is fine for someone who looks after things and isn't clumsy. On a side note any 3DS XL case would likely fit I have several fabric ones that are nice and snug.
I was very pleasantly surprised that once in the case, and violently shaked, it doesn’t even jiggle. At first I didn’t really understand how to easily open and close it, but I’ve since figured it out and I quite like it. I don’t have a case like this for any of my devices and I love it. For display and for travel.
@@colinportman that is very helpful feedback thank you so much! I have a decent selection of 3DS soft cases so that would solve my issue! I really appreciate it!
@@the3dbunny good to know, thank you!
cute, CUTE 💖
I just wanted silver, or blue, or indigo, orange spice better than nothing
black and white ones are back in stock!
I was barely able to get the spice orange before it sold out, congrats on owning a pocket there amazing
They go so quick! Got the pink within minutes, and hours later it was still available. Guess it was the least popular color, unsurprisingly. Good for me though!
@the3dbunny yea Yellow and pink were available all day basically.
Yahoo-good unboxing~taek it easy~
✌️
😉👍
banana for scale?
hahaha next time!
Good clean prints. the optimizer in me, thinks you could likely get away w/o brims. Thanks for sharing :)
Definitely! Noticed that after the first one, but didn’t feel like re-slicing 😅
thanks a lot
At the .55 depth or letter thickness can you print without supports?
Yes! No problem
Awesome job explaining and showing!! One of the best video's I have seen.
I spent a few hours figuring out a workaround for this... came up with a method similar to yours, thought it was sooooo great I made a "how-to video" ; was about to upload it, then I saw your video. Thanks. :P
Perfect explanation, thank you very much
Awesome video! Very clear and I love how you went through multiple surfaces. Thank you!
Tanks for your help.
Your explanation in this video is astounding! As much as I love embossing stuff, I'm having a bit of a problem with one particular project. What's the best method of embossing a conical shape without having the text distorted or looking like a frowny face? I'm making a custom Bowling Ball Holder that is a cylinder 20mm thick with a -25˚ draft from base to outside surface and I want to put someone's name wrapped around the whole thing but the only method I've found to make it work is to draft every single letter and hole within each letter (like the letter o) individually after the emboss has been done and the initial draft operation is complete.
If you put the text on a circular path with the center on the top of the cone, your text will be distorted in such a way that the emboss distorts it back to what you are looking for. This video uses this trick for example: th-cam.com/video/aRL9OmR70R4/w-d-xo.html&ab_channel=Murxs1st
Come back... We need you.
amazing vid. I only watched the part I needed but went back and played the entire thing at .25 speed w/ no sound to give you 400% watch time.
"...to write text." Not, "...to write text in". No "at", "in", or "on" at end of statement. Sounds illiterate.
You need more content
Great tutorial!
Excellent video, very clear and easy to follow!
I’ve watched a lot of videos on this and I must say your explanations are so clear and the visuals are great. Thank you so much for the help!
Thank you pretty lady on the screen
Thank You Bunny. Thanks to you, I debossed RESET text on a half sphere button
I was able to emboss on to the sphere. You have to create a cylinder over the sphere, emboss on the cylinder, go back to when you extruded the cylinder and change it to intersect then hide the cylinder.
Hi and thank you for the video! can you please tell me why i'm not able to select the stl? i.postimg.cc/L4cZJ5yH/Screenshot-2022-11-08-173726.jpg
Hello how are you You have posted only one vedio Try to make new vedios How I can contact you to ask futher questions
I had so much trouble with this! I kept getting error messages and I followed the video exactly. After some google searching I found that some fonts don't work for extrude/emboss (a bug apparently) Changed to arial and had no problems, tried on all the examples in the video. thx for the vid btw, was super informative.
Great video,Thank you Bunny. Very nice explanation, You made me understand what I was looking for all day. I encourage doing it again. I'll be waiting.