วีดีโอ

Jay? From Dawson Nebraska?! I thought the place looked familiar! Alan from Omaha, using my Victor Hugo alias thanks to Facedbook and their "community standards" enforcement. Subscribed!!

The part that you were levering out at the top where you made comment as to it having Velcro, but you didn’t know why it was Velcro’d on, how was that re-attached? That detail was missing from the video.

That is a GOOD truck! Get one a little smaller with a 6V-53 and a 13-under. 60 m.p.h. and 2800 R's and the fillings in your teeth start swapping holes much less your eyeballs crossing. A 6-71 tops out around 21 or 2200. A 53 will go 28 and you feel every one of them but I wouldn't swap one for a million.......or maybe a 3406 Kitty.

Цікава інформація. Але я не бачу нових відео. Будьласка зробіть ще щось новеньке. Бережіть себе!!

My "74" Ramcharger was the first year with a FULL convertible top. I bought it brand new with 10 miles on the odometer. I had the top off maybe twice in the time I owned it. It was heavy and a PIA to deal with. Took like 4 guys. Weight was toward 300 Lbs.

Друже привіт! Чекаю на нові відео

how much was the body

What brand of top did you go with

Funny story my dad had one about 20 years ago or so I saw that old dump truck by Iowa . There was no mistaken it was the truck just a faded paint job.

On my '14 CTD model I had a nightmare with the DEF system due to a bad NOX2 sensor (original factory one). It was replaced under warranty with the updated one and no issues since. But now I sometimes get the P2002 code with the DPF and I drive highway miles most of the time everyday mostly 2-lane 60mph roads. I do the regen, eventually it clears on its own but few weeks later comes back. I know if that DPF goes under the car is finished unless I can do away with it somehow. Its a great car and has good FE, but the emission junk holds it back big time.

😮 I have a 79 DRC 4x4, and top has never been removed! I want to remove it to replace the rubber seals but I don't have a forklift!?lol

I recently bought 2.0 diesel cruze it was shower dpf heater and filter so I drove it 85 mph for 10 miles and it was fine but if I drive 70 for a few days it'll show up again so I'm realizing gotta keep those exhaust temps up drive it faster occasionally or simply get it deleted

My is deleted from Def not working no more

Turbo is piece of shit

Do you have still the car

I get problems with the turbo blowing out

You should send that tub to me if you think it's bad! Mine is way worse.

I have the same exact one. I mean the same color and everything. Even down too we're the hood is slightly faded 🤪

While in neutral, kick up the idle to 2200rpm and set cruise control to speed up pto. Your bed will move faster.

Okay, changing my comment, although it's a similar sentiment. There's a lot of work to this, but I loved your idea of using zipties on the rainrail, as my rivet gun would not put a rivet all the way through the rail. So that worked out much better. I used your video as a guide, but I didn't take anything out of the car other than the top, rear plastic and the rainrail. I left the entire rollbar, and the frame of the top in place. But I did take out the rear plastic and the windscreen on top of the rollbar to give me a little room. Then when I was installing the new top, I connect the side bars of the rainrail almost blind just feeling by hand. Then I installed the rest of the top onto its frame, and after I buttoned up the top bar at the front of the top, I pulled it tight and latched it. That allowed me to just move both seats forward and lean them forward, so standing behind them, I put all the rest of the middle rainrail nuts on, and tightened them all up. Yes it was cramped, but not having to take all that other crap out was great. I really liked your vid though, and enjoyed the music.

Excellent video thank you

I love those 99E's they were good graders

Just wanted to say a big kuddos and thank you for the excellent camera work and many angles. I'm contemplating a mad scientist roof project and your video showed so much detail on how the roof operations works that I'm able to plan without having the actual car in front of me and taking the top apart. Excellent job!

Lol, I don't think I've ever seen a detroit that doesn't need a gallon of ether to start

brake cleaner takes rattle can paint right off without removing or damaging factory paint

About how much does the truck weigh?

I did a manual regen and the car is running like new but the service emissions code on the dash isn’t going away. Any advice?

Was that the possum van from the Red Green show @9:56?

Ive got the same truck in dark green except it has the international gasoline V8

Apologies if this has already been asked and answered, but which top is this? I'm trying to decide what to buy and the price range from $400-$1000+ indicates a pretty big range in quality. Is this a cloth or vinyl top?

I appreciate the work done to show us all what is involved, however I am trying to understand the Musak playing over the audio? I can hear you talking behind the music at times but cannot make out the commentary, too bad. Also, I know how to unhook a spring from the cable, would have much preferred to find out how the top release but comes off without breaking it so that you can remove the rear molding.

I've got one of these donkey DT444 and have to get it accelerate faster

You scaled it? Wondering what payload would be. Got a 5519 telehandler id like to haul and just having a flatbed would make life easier than trailering

You got Dana 60’s under the front and back? I noticed your spare was 8 lug….

i know video was posted 11 months ago but if you see this truck absolutely has a boost leak that's the loud hissing sound you here from inside cab that why its such a slug

The Magnum nose resembles Cord 810.Coffin nose grill.Maybevthats why the Packard guy liked it.

Thats a $10,000 truck all day long! Ive got a woody!!!!

I have one too with the DT-466E and love it, it has been very dependable !

I just bought a 99 4700 with the T444e, Spicer 5 speed, same interior as yours except for regular bench seat. Short wheelbase, was a traffic control barricade truck with the fold down crash absorber, removed before sale. Drove it home today with no issues, drove like a new truck.

HI,, Did u not install the flat rivits that hold the guide in?

Dam

What was the red/burgundy truck parked next to yours at the auction lot? Dodge?

The row of lights fell out of mine too, it's a manufacturer defect. The glue they used wears off after about 5 years and a slight bump will make them fall. Just apply some super glue along the inside black edges when you reinstall and it'll never come off again.