วีดีโอ

My recommendations would vary by the customer. Some customers want a machine as narrow as possible with as much lift capacity as they can get, for us that machine is the IR1300. I have some customers who prefer the IR1200 because they want a machine that is a little bit wider for stability. As far as the specs, the IR1300 is a stronger machine with a higher auxiliary flow rate, upgraded drive motors, and a heavier duty bucket with a narrower frame for getting into tighter areas. The IR1200 has a slightly higher hinge pin height, and has shown itself to be slightly faster than the IR1300. Both of these machines have moved around much heavier loads for us than they are rated for, and they have many similarities. As of right now the price difference between the IR1200 and IR1300 is about $2000.

@@ironrhino2788 Thanks for your insights! I appreciate it.

Kubota D1703

We hope to have one completed soon. We have some short clips of this machine in action on our Instagram as well.

We have now uploaded a comparison video as well as a video of the IR1300 running multiple attachments.

Glad you enjoyed it!

Here is the direct link to the listing with price www.chipperllcsales.com/inventory/2024-iron-rhino-ir1700dc-dump-cart-free-shipping-2024ir1700dc/

​@@ironrhino2788 Thanks

The standard track size for the IR1000 is 200x72x45, but this track we installed is a narrow track at 180x72x45.

Our machines are only available in the Continental US.

Here is a link to the specs and pricing of both machines. www.chipperllcsales.com/equipment/mini-skid-steers?manufacturer=iron+rhino&condition=new&price_min=24495&price_max=29995

​@@ironrhino2788 do you guys upgrade the pumps as well to a triple pump system? any changes and upgrades to it?

At 39.5" wide this machine is wider that many other narrow machines that are 36" wide such as the MT100 narrow track or the scl1000. Best practice when operating on a hill is traveling straight up and down and keeping your load down low. However, if you want a wider machine, the IR1000 is 42" wide at the tracks, or 43" wide if you upgrade to 9" tracks.

As with all things, take it easy and familiarize yourself with your tools.

Minimum needed flow is 5GPM and maximum flow is 15GPM. You can find it for sale here. www.chipperllcsales.com/iron-rhino-44-dingo-power-rake-harley-rake-mini-skid-universal-attachment-tHdn%7CdKj.html

@@ironrhino2788 thanks boss

The one in the video has a 25hp Kubota, but we have units with Perkins as well.

The IR1000 has 25HP

The first things I would check are track tension, the terrain you are working on, and check for any damage to the track that may cause it to come off the sprocket. If all those things look good, you should check the alignment of your rollers, and the wear on your sprockets. Running into hard surfaces like curbs and large rocks could cause damage to rollers and over tensioning of tracks can cause the sprocket to wear faster, both of these things could cause tracks to come off.

Yes, this auger is running at its max speed for this machine. This extreme duty CID Auger is now only made for Skid Steers that have a higher flow rate than most mini skid steers have.

Typically that is just needing to tighten the bolt on the side of the throttle.

Thank you I will try that

IR480 Track with Joystick Control is currently $21,195 with tooth bucket, a 36" root grapple is currently $1,195.

We can make these work with dingo or MT plate.

@@chipperllc1185 its not universal to the other ones like ditch which and cormidi

@@ctlandscapemaintenancesolu494 The one in the video has the dingo plate also known as the universal mini skid steer plate. But we also have models that can work with the bobcat mt plate that is found on machines like the bobcat MT100.

Here is a link to the backhoe attachments. We have different styles. chipperllcsales.com/equipment/universal-mini-skid-steer-attachments?category=equip_backhoes

Does that mean it tends to tip or break down?

While we have lifted more than 500# with the IR480 the machine does tip forward easier when you have a higher load than it is rated for. We had a customer send a video back to us of him lifting the back end of his truck with this machine.