วีดีโอ

Would have liked to see the finished porch.

Alarming lack of electrical safety advice here! Of course you switched off the power before connecting the receiver but then appeared to manipulate the connected box and wires into position above the light with the power left on. In my decades of experience I have many instances of wires coming free or not being securely fixed the first time you screw up or use a connector and this introduces a real danger for the non professionals doing such an installation. I would say ALWAYS have the power off until the unit is securely and safely in the ceiling cavity and only then put the power back on and test it. The number of people electrocuted or severely shocked every year in accidents is extremely high. Thank you for a well made instructional video but safety should always come first.

Why lower cabinets are hanging on the wall? What's the point?

Did you ever end up installing the legs on each of the base cabinets? or are these floating on the wall?

So, ifnthe light goes out, can you change it or just buy another mirror?

Thanks.

I wondered. Could you have simply cut the plug off and wired it with the barre wires?

Loved the Muppets. Really good and informative video.

Thanks Jason! I'm gonna apply your method today.

Why..?? If its already had light switch..?? ... oh I had an idea.. I installed it and keep in my room to scare my kid out🤪🤪.. Dad that light turn on it self 🤙🤙🤙

This is a very informative and detailed video. I will save this for reference. Thank you. 😊

Your video was good, but remove the music in the background. It’s very distracting when you’re talking.

Great info, thanks. Question for anyone that might know. I have an old light fixture on wall on top of sink, so there is a round junction box. Most of these light mirrors come with a plug. Can I just cut the plug and hardwire it directly to existing wires? Or is there an outlet that can be install it in the round junction box? I am trying to avoid removing/replacing the round junction box for a rectangular which involves drywall repair. Thanks in advance.

How dangerous! No guard on your cutter!

Which battery need for the switch?

What brand is it? I looked and there are so many I dont which is better?

Thanks. I learned a lot, and felt like I was watching a porn video at the same time. Tight editing.

what screws are you using to connect the cabinets? the ikea instruction has some wood screw in a random place. its really ugly inside the cabinets. and the hole that you are using for the screw is empty after completion.

Will it come on with the switch or do you have to turn it on by the button on the mirror itself every time?

Hi I have kitchen cabinet work I want to learn something from your experience can you tell me something please

What is the size of the mirror?

is there a way to do this in the wall switch? i have 12 spotlights all working with a dimmer switch, i want to replace the dimmer and put this box in so all 12 spots work on it, just like with the wall switch. i do not know how all the wires are connected to that wall switch that is the problem..

Nova tehnologija stara 50+ godina a u auto industriji već preko 20 godina, e moj Jura, natrag u školu.

Thank you 😊🙏🏻

Thanks for sharing. Some installed a very similar mirror for me and mistakenly wired it to the existing switch for the lights above the mirror. Guess what? It kinda defeat the purpose of the using the power button on the mirror to keep that on by itself.

Thanks. I did this today, and thanks to your video, it went very smoothly, and so fast. I started looking at the instructions, but figured there's be a video.

This video gets an A for info but a D- for annoying loud weird music.

Thank you for teaching me... from Philippines

Does the switch have a replaceable battery?

Thanks, now I know not to buy that

Thanks for the video. Will I be able to install the thinkbee receiver to a wall light switch instead of to the actual light in the ceiling?

Fast cap nuclear bender

Thanks guys

Leaving the drywall in place is actually a good thing, its code in most places to have it behind the wood anyway. Also without it you would need to air seal behind the wood anyway creating even more work/cost after the demo

can you turn on and off light on the original switch?

Ikea have what you need to install a kitchen island for easy installing of kitchen island.

Thank you for this video from the bottom of my ❤. I thought I was stupid because I could't change bloody blade 😂

I guess it’s the OCD in me but I could not handle putting a patch like that even over a 2” hole with nothing else behind it like regular sheet rock. If say a kid had a friend over and was shooting pool and a ball came off the table and knocked a hole in the wall and you repaired it with one of those kits, say a month later the same kid and his friend were playing pool again and they were like yeah that hole was right here somewhere & my dad fixed it and they go poking around with their finger. I think it was right here and then their finger goes through the wall & total it out but just poking it and with that I just couldn’t handle it I would have to repair it with an old piece of sheet rock by my patch or something. I even used Bondo like you repair a dent in a car with it really works well, it’s a little harder to work, but it works really well.

Great video! Very helpful and I like the music choices and editing! 👍

thanks for the video! if you wanted to attach the start of the island to a wall, how would you do that with the legs ?

Thanks for this! I just bought my first house and the bathroom didn’t have a mirror installed. However, it conveniently has a wall plug in the middle where the mirror would be

This video should be called how to hang LED mirror because the installation includes hard wiring the mirror into the box. for those who came here to look how to hardwire the mirror: simply remove the light fixture, (which you will not going to need if you have a self lighting mirror) and install the mirror wiring it into the box where the light fixture used to be hardwired. Don't need to call an electrician and most definitely don't need to have a light fixture on top of the mirror, that's an absolute redundancy and I don't even think it looks good. So again, if you have a light fixture, remove it and hang your mirror after you hardwire it into the box that is now empty, because you removed the light fixture. I hope this clarifies it for some people. Also if The mirror comes with a plug instead of a wire, just cut the plug and strip the wire which will make it ready to install hard wiring it into the box

These annoy me. I don't want all this technology that will break. I don't want Bluetooth or a touch screen.

I loved everything about your video, you’re a gem! dry humour, great instruction , simple explanation 🙌 well done!! Thanks for your guidance :):)

What size pilot hole do you drill for the toggle bolt?

Thank you so much for showing how to do this on your own! I'm a single mom and was worried I'd have to pay for extra hands to install my cabinets, I know I got this now!

I used to be a mirror…

Great video man, i have the excact mirror. Thanks for your time

I am a trim carpenter myself. I have these exact miter shears. I can say myself that I would use my miter saw over these shears anyday, even though it takes longer. Great Video, You got a new Subscriber 👍🏾

Can I install the receiver directly to an existing light switch -and- is there enough room for two receivers in one 2 gang box?