- 1
- 47 700
Drew Brancaccio
เข้าร่วมเมื่อ 11 ธ.ค. 2013
Lincoln AC 225 New Cables Installation
Just how to put new cables in a lincoln ac 225 and also wire the plug.
UPDATE. The plug did work not sure what the red wire was for
UPDATE. The plug did work not sure what the red wire was for
มุมมอง: 47 709
Best guess, he knocked himself to the ground and is still trying to get up. WOW
Videos are helpful when you first off think about what you going to say in s awful that goddamn camera still
Check out www.wireandcableyourway.com fast ship and great welding cable. On these lincoln AC 225 the cable is under sized by the factory! You want to go with 1 AWG or 2 AWG if less than a 50 ft run. 1/0 is next size bigger but way overkill not needed.
That's the wrong plug and receptacle for a welder. This welder requires a 50 amp circuit. You have a 30 amp dryer plug.
Red and Black are suppose to be the HOT Leads and you should had combined green and white to neutral/ground. That would had been code. Your Welder run's on 2 Leads and a neutral/ground. I do use a 50AMP plug since all my power sources are 50AMP outlets in the shop and out back as well as on our welding trucks.
The
red is for 3 phase applications
where did you get the new leads?
Travis Beard a welding supply place, in my area I used Airgas
Drew Brancaccio hey man thanks, my grandpa gave me the same welder, once I get power ran I'm gonna have to get some
Tractor Supply for the cable and Clamps and Lead you can get at Harbor Freight for low cost.