วีดีโอ

Please leave your email address, and I will send you pictures of my installation for your reference.

ok i send you email

RSSI_ANA_PIN,8 RSSI_CHAN_HIGH,2000 RSSI_CHAN_LOW,1000 RSSI_CHANNEL,12 （MY RC rssi signal ） RSSI_PIN_HIGH,5 RSSI_PIN_LOW,0 RSSI_TYPE,2 MSP_OPTIONS,4 MSP_OSD_NCELLS,1 SERIAL*（6）_BAUD,115 SERIAL*（6）_PROTOCOL,42 *MY osd set serial6 , mateksys H743,*

MY osd parameter config list ：H743 ardupilot 4.X.X 。DJI G2 MSP_OPTIONS,4 MSP_OSD_NCELLS,1 SERIAL*（6）_BAUD,115 SERIAL*（6）_PROTOCOL,42 RSSI_ANA_PIN,8 RSSI_CHAN_HIGH,2000 RSSI_CHAN_LOW,1000 RSSI_CHANNEL,12 （MY RC rssi signal ） RSSI_PIN_HIGH,5 RSSI_PIN_LOW,0 RSSI_TYPE,2 OSD1_ALTITUDE_EN,1 OSD1_ALTITUDE_X,24 OSD1_ALTITUDE_Y,16 OSD1_ARMING_EN,1 OSD1_ARMING_X,18 OSD1_ARMING_Y,7 OSD1_ASPEED_EN,1 OSD1_ASPEED_X,25 OSD1_ASPEED_Y,18 OSD1_AVGCELLV_EN,1 OSD1_AVGCELLV_X,17 OSD1_AVGCELLV_Y,19 OSD1_BATUSED_EN,1 OSD1_BATUSED_X,17 OSD1_BATUSED_Y,18 OSD1_CHAN_MAX,3000 OSD1_CHAN_MIN,1200 OSD1_COMPASS_EN,1 OSD1_COMPASS_X,27 OSD1_COMPASS_Y,0 OSD1_CURRENT_EN,1 OSD1_CURRENT_X,17 OSD1_CURRENT_Y,17 OSD1_DIST_EN,1 OSD1_DIST_X,36 OSD1_DIST_Y,19 OSD1_ENABLE,1 OSD1_FLTIME_EN,1 OSD1_FLTIME_X,43 OSD1_FLTIME_Y,19 OSD1_FLTMODE_EN,1 OSD1_FLTMODE_X,10 OSD1_FLTMODE_Y,17 OSD1_FONT,0 OSD1_GSPEED_EN,1 OSD1_GSPEED_X,24 OSD1_GSPEED_Y,19 OSD1_HOME_EN,1 OSD1_HOME_X,23 OSD1_HOME_Y,1 OSD1_HORIZON_EN,1 OSD1_HORIZON_X,27 OSD1_HORIZON_Y,9 OSD1_MESSAGE_EN,1 OSD1_MESSAGE_X,15 OSD1_MESSAGE_Y,14 OSD1_RSSI_EN,1 OSD1_RSSI_X,41 OSD1_RSSI_Y,17 OSD1_SATS_EN,1 OSD1_SATS_X,45 OSD1_SATS_Y,17 OSD1_THROTTLE_EN,1 OSD1_THROTTLE_X,11 OSD1_THROTTLE_Y,18 OSD1_TXT_RES,0 OSD1_VSPEED_EN,1 OSD1_VSPEED_X,25 OSD1_VSPEED_Y,17 OSD1_WIND_EN,1 OSD1_WIND_X,8 OSD1_WIND_Y,19 OSD2_STATS_EN,1 OSD2_STATS_X,22 OSD2_STATS_Y,5

Send you a picture via private message

@@ONLYYOUKICK private messeage how?

@@Nander0 mail

Tmotor F80 1900kv 、Flycolor 50A bl32， 6s 2200mah 120c 、64 pulp

👋

😂

my record 22000 feet, understand 😂

The flying distance of this video is not far, 4.5km

Sorry, I don't quite understand what you mean. Regarding the anti-shake of the video screen, I use the automatic anti-shake of the DJI o3 image transmission without any post-production settings. I'm using matekh743 as flight controller with latest firmware of ardupilot 4.3.1. I'm used to manual flying, 90% of the time in the video I use "manual" mode to control the flight, this description configuration is the device I'm using: th-cam.com/video/9T3asEYwPIs/w-d-xo.html&t= 413s

The relevant printed parts of my own design are here ：www.thingiverse.com/thing:6046059

Headtracking module made with arduino nano and open source program DIY Headtracker

Can't say what he did, but I can say that my Walksnail Pro cam sits in the notch just over the nose cone without any of the cone in view. Just stuck it up there with hot glue.

This generation of DJI O3 has a certain degree of water resistance. As long as the main unit is not directly exposed to the outside of the fuselage, there will be no problem. I have not found any problems with the exposed lens. I have also flown many times in heavier rainstorms. This generation of lens has a certain anti-fog and waterproof effect, which is very good. You can fly directly in the rain with confidence. Just remember that the image transmission host should not be directly exposed to the outside.

I didn’t do any special treatment. At present, I have flown more than 20 times in light rain, heavy rain, and heavy rain for as long as 400 minutes without any problems. When you watch other people’s dismantling video of DJI 03 image transmission You will find that the inside of the o3 device has been completely filled with thermal grease, and this generation of lenses happily does not cause the lens to fog due to changes in air temperature

TMOTOR F80 1950kv , 6s 2200mah lipo

dji o3 supports canvas mode, so all osds can be displayed, including the horizon, I am using ardupilot 4.3 firmware, the latest firmware includes bf, inav all support it

lipo 6s 2200 35c

@@ONLYYOUKICK thank you

Give me your email ，I will send it to you

@@ONLYYOUKICK I have to type email this way or the reply would get deleted

I quit, no matter how I leave my address, it get deleted.

yuexiao0518艾特谷歌邮箱

@@fckwarcrime4439 😂

DJI default

Personally I recommend that the G2 and O3 visuals are very good. Video can meet most flight videos to save. In most cases, you can do not need to hang other video devices such as GoPro. The maximum map of my current flight is 23km, and the maximum flight is The height is 7600 meters high. I am very satisfied with this data

@@ONLYYOUKICK WOW data actually. Flight time ?

I use a 6s lipo 2200 mAh battery, and I can fly 14km away for 18-20 minutes of normal flight, and then return. The total mileage can fly about 38km. If you fly slowly with a small throttle, the longest flight is 45 minutes. 50km total mileage

TBS CROSSFIRE 915（500mwh can fly 40km stably） , Dji o3 unit In my test, the farthest distance finally lost the signal at 23.4km,（20hz ，ch1）

@@ONLYYOUKICK Damn 40km on the crossfire 915mhz.. that’s incredible. How were you still able to fly the drone without the video after it cut out at 20ish Km’s? Or does crossfire tx/rx also carry the digital video signal as well? Honestly to be able to get to 23km’s, so at least 20km from the dji 03 air unit itself. That’s probably plenty for most setups, including mine lol. So have you ever tested it like this with the DJI RC2? Not with crossfire..

@@mxracingunlimitedltd7784 DJI drones can't reach

@@ONLYYOUKICK Why your on 20hz? on 40hz has less range ? Thanks

@@-exeCy- 40hz

It needs to be set correctly on the flight controller, I am using ardupilot 4.3+

MSP_OPTIONS,4 OSD_TYPE,5

@@ONLYYOUKICK many thanks 😀 I am on iNav now but have a plan to move to ardupilot but before I have to learn how to do it.

@@RobertBulko inav is relatively simple, but ardupilot only has some simple basic settings, and its default configuration is already very stable. ardupilot is relatively more professional

​@@ONLYYOUKICK hi, inav can't show altitude, and sometimes all freeze, did ardu mire stable, and the altitudeicon n number worksgreat?

no, you can see on the osd the rc value is zero

If you use your clear name and no VPN for activating your DJI-Stuff, it's honestly your own fault.

You need to activate your goggles before using them? At least my v1 and g2s needed activation with a DJI Account…

​@@WDZaphod you ask stupid questions. he's not going to tutor you on this. just follow the rules u r told.

@@RESISTAGE Thanks for your unrequested advice, why you dont shout a bit at the kids on the street, instead of making useless noise here? If you would use DJI Goggles, you would know that you need to activate them. So pls. keep trolling somewhere else.

This doesn't make sense...your o3 air unit doesn't have your personal data. It's not connected to the internet, it doesn't know who you are. It's not like the store that sells it to you delivers all your personal info to DJI to be linked with the serial or something, don't be ridiculous... They also cannot know the location of the pilot. How would they know that? There is no GPS in the goggles. People are so weird about this stuff. DJI is not an "evil" company. Obviously they will comply with the law, but they actually advocated firmly against RemoteID during the comment period, you can actually look up their commentary to the FAA. Learn what the actual law is. Our hobby drones do not need pilot location. Let's be honest about what is actually going on here, and what isn't.

yes

ardupilot 4.3.1 osd OSD_ARM_SCR,0 OSD_BTN_DELAY,300 OSD_CELL_COUNT,-1 OSD_CHAN,0 OSD_DSARM_SCR,0 OSD_FONT,0 OSD_FS_SCR,0 OSD_H_OFFSET,32 OSD_MSG_TIME,10 OSD_OPTIONS,1 OSD_SW_METHOD,0 OSD_TYPE,5 OSD_UNITS,0 OSD_V_OFFSET,31 OSD_W_AVGCELLV,3.6 OSD_W_BATVOLT,10 OSD_W_NSAT,9 OSD_W_RESTVOLT,10 OSD_W_RSSI,30 OSD_W_TERR,-1 OSD1_ALTITUDE_EN,1 OSD1_ALTITUDE_X,12 OSD1_ALTITUDE_Y,14 OSD1_ARMING_EN,1 OSD1_ARMING_X,12 OSD1_ARMING_Y,6 OSD1_ASPD1_EN,0 OSD1_ASPD1_X,2 OSD1_ASPD1_Y,6 OSD1_ASPD2_EN,0 OSD1_ASPD2_X,0 OSD1_ASPD2_Y,0 OSD1_ASPEED_EN,1 OSD1_ASPEED_X,1 OSD1_ASPEED_Y,14 OSD1_ATEMP_EN,0 OSD1_ATEMP_X,0 OSD1_ATEMP_Y,0 OSD1_AVGCELLV_EN,0 OSD1_AVGCELLV_X,17 OSD1_AVGCELLV_Y,4 OSD1_BAT_VOLT_EN,1 OSD1_BAT_VOLT_X,25 OSD1_BAT_VOLT_Y,0 OSD1_BAT2_VLT_EN,0 OSD1_BAT2_VLT_X,1 OSD1_BAT2_VLT_Y,7 OSD1_BAT2USED_EN,0 OSD1_BAT2USED_X,0 OSD1_BAT2USED_Y,0 OSD1_BATTBAR_EN,0 OSD1_BATTBAR_X,18 OSD1_BATTBAR_Y,8 OSD1_BATUSED_EN,1 OSD1_BATUSED_X,25 OSD1_BATUSED_Y,1 OSD1_BTEMP_EN,0 OSD1_BTEMP_X,0 OSD1_BTEMP_Y,0 OSD1_CALLSIGN_EN,0 OSD1_CALLSIGN_X,0 OSD1_CALLSIGN_Y,0 OSD1_CELLVOLT_EN,0 OSD1_CELLVOLT_X,11 OSD1_CELLVOLT_Y,13 OSD1_CHAN_MAX,2100 OSD1_CHAN_MIN,900 OSD1_CLIMBEFF_EN,0 OSD1_CLIMBEFF_X,0 OSD1_CLIMBEFF_Y,0 OSD1_CLK_EN,0 OSD1_CLK_X,0 OSD1_CLK_Y,0 OSD1_COMPASS_EN,1 OSD1_COMPASS_X,15 OSD1_COMPASS_Y,1 OSD1_CRSSHAIR_EN,0 OSD1_CRSSHAIR_X,0 OSD1_CRSSHAIR_Y,0 OSD1_CURRENT_EN,1 OSD1_CURRENT_X,25 OSD1_CURRENT_Y,2 OSD1_CURRENT2_EN,0 OSD1_CURRENT2_X,0 OSD1_CURRENT2_Y,0 OSD1_DIST_EN,1 OSD1_DIST_X,12 OSD1_DIST_Y,2 OSD1_EFF_EN,0 OSD1_EFF_X,25 OSD1_EFF_Y,2 OSD1_ENABLE,1 OSD1_ESCAMPS_EN,0 OSD1_ESCAMPS_X,24 OSD1_ESCAMPS_Y,14 OSD1_ESCRPM_EN,0 OSD1_ESCRPM_X,22 OSD1_ESCRPM_Y,12 OSD1_ESCTEMP_EN,0 OSD1_ESCTEMP_X,22 OSD1_ESCTEMP_Y,8 OSD1_FENCE_EN,0 OSD1_FENCE_X,11 OSD1_FENCE_Y,10 OSD1_FLTIME_EN,1 OSD1_FLTIME_X,24 OSD1_FLTIME_Y,15 OSD1_FLTMODE_EN,1 OSD1_FLTMODE_X,0 OSD1_FLTMODE_Y,11 OSD1_FONT,0 OSD1_GPSLAT_EN,0 OSD1_GPSLAT_X,3 OSD1_GPSLAT_Y,15 OSD1_GPSLONG_EN,0 OSD1_GPSLONG_X,7 OSD1_GPSLONG_Y,15 OSD1_GSPEED_EN,1 OSD1_GSPEED_X,0 OSD1_GSPEED_Y,13 OSD1_HDOP_EN,0 OSD1_HDOP_X,0 OSD1_HDOP_Y,0 OSD1_HEADING_EN,0 OSD1_HEADING_X,14 OSD1_HEADING_Y,3 OSD1_HOME_EN,1 OSD1_HOME_X,11 OSD1_HOME_Y,0 OSD1_HOMEDIR_EN,0 OSD1_HOMEDIR_X,12 OSD1_HOMEDIR_Y,3 OSD1_HOMEDIST_EN,0 OSD1_HOMEDIST_X,11 OSD1_HOMEDIST_Y,11 OSD1_HORIZON_EN,0 OSD1_HORIZON_X,14 OSD1_HORIZON_Y,8 OSD1_LINK_Q_EN,0 OSD1_LINK_Q_X,1 OSD1_LINK_Q_Y,1 OSD1_MESSAGE_EN,1 OSD1_MESSAGE_X,5 OSD1_MESSAGE_Y,4 OSD1_PITCH_EN,1 OSD1_PITCH_X,10 OSD1_PITCH_Y,13 OSD1_PLUSCODE_EN,0 OSD1_PLUSCODE_X,0 OSD1_PLUSCODE_Y,0 OSD1_POWER_EN,0 OSD1_POWER_X,14 OSD1_POWER_Y,9 OSD1_RESTVOLT_EN,0 OSD1_RESTVOLT_X,24 OSD1_RESTVOLT_Y,2 OSD1_RNGF_EN,0 OSD1_RNGF_X,5 OSD1_RNGF_Y,4 OSD1_ROLL_EN,1 OSD1_ROLL_X,16 OSD1_ROLL_Y,13 OSD1_RSSI_EN,1 OSD1_RSSI_X,0 OSD1_RSSI_Y,1 OSD1_SATS_EN,1 OSD1_SATS_X,0 OSD1_SATS_Y,0 OSD1_SIDEBARS_EN,0 OSD1_SIDEBARS_X,4 OSD1_SIDEBARS_Y,5 OSD1_STATS_EN,0 OSD1_STATS_X,0 OSD1_STATS_Y,0 OSD1_TEMP_EN,0 OSD1_TEMP_X,0 OSD1_TEMP_Y,0 OSD1_TER_HGT_EN,0 OSD1_TER_HGT_X,23 OSD1_TER_HGT_Y,7 OSD1_THROTTLE_EN,1 OSD1_THROTTLE_X,3 OSD1_THROTTLE_Y,11 OSD1_TXT_RES,0 OSD1_VSPEED_EN,1 OSD1_VSPEED_X,13 OSD1_VSPEED_Y,15 OSD1_VTX_PWR_EN,0 OSD1_VTX_PWR_X,1 OSD1_VTX_PWR_Y,6 OSD1_WAYPOINT_EN,0 OSD1_WAYPOINT_X,8 OSD1_WAYPOINT_Y,10 OSD1_WIND_EN,1 OSD1_WIND_X,0 OSD1_WIND_Y,15 OSD1_XTRACK_EN,0 OSD1_XTRACK_X,2 OSD1_XTRACK_Y,2

@@ONLYYOUKICK thank you!

@@ONLYYOUKICK Have you changed the osd font somehow? Are all panels displayed?

ATOMRC DOLPHIN ， 2200 mAh lipo 6s。F80 1900kv ，BL32 50A

@@ONLYYOUKICK what are the flight times with this battery ? do you suggest 6s Liion 4k mah ?