วีดีโอ

Thanks man. Went through this back up set within 1.5 years. Last video I watched didnt say anything about greasing the bearings so this should help. Thanks again

Good video. I went with Stihl after seeing your old review that mentioned this issue. The dealer I talked to was not aware of any such issue on the Stihls. It also seems like a much simpler design with just a metal pin connecting to the top piece.

Look at all that metal that you are losing on the blades by using a side grinder ! Why don’t you just take your time and use a file you will get a more precise edge and no where nearly as much metal that you are taking off your blades. That grinder reduces the life of your blades big time. Use a file and take your time much better results 👍

Keeping the link for the future. Thanks

Your videos are so helpful. I bet I will need to do this in the future. Thank you sir!

I will bear this in mind if I get any issues.. thanks 👌

Fingers crossed, this is the long term fix for this issue. You heard it here first 😅. Leave me a like for my efforts👍

Qual o nome da máquina

Great trick but in America, the blower tubes are straight 😂

Hat was such a useful demonstration. Thanks very much!

Hello, Is it possible on pruning saw MAKITA DUC101Z to change 10 cm guide bar with 15 cm, which is from DUC150Z model?

So tilt it with carburetor up?

At 29:25 what tool did u use and what was that turn for ? & also at 30:00 can u show and explain what u did back there what was that purpose. If possible thanks

Thanks - this was a very helpful video when setting up my new sprayer

Bought the new carburetor from STIHL them selfs or Amazon ?

Just ordered one, it's come but it's got a plate at the top of the chute, a safety thing I guess but I'm wondering how anything's going to fit in the hole. None of the videos I've watched have this.

Hello, worth to buy these? ;o

Is it normal that when I grab one blade and the other with my other hand and move the blades one to the left, the other to the right, to the side, the blades move a little bit a millimeter or two.The greatest displacement is observed on the nose of the blade, and apparently begins at the very beginning of the blade when it gets into the gearbox. Otherwise, it cuts good after 50 hours of work.

Thanks for sharing your knowledge

My belt has shredded twice after changing it out. Any idea what am I doing wrong?

I use the Dremel SpeedClic CBN (Cubic Boron Nitride) 38mm Dia Cutting Disc's to cut off seized track rod ends and seized bearings at the top of suspension strut mounts etc. "without" damaging mating surfaces .... something not easily achieved with a 115mm grinding disc.

I use an m12 angle die grinder with a roloc disc. Best of both worlds for me

Onde compro?

Thinking of getting one of these

I have been restoring a Westwood Laser L95 and I have a sweeper with it, the mower no longer has a cutting deck nor any brackets on it. I believe I may have the brackets but I don't know how to fit them. Many of the once moving parts are rusted together apart from the engine etc. Any ideas on how to attach and run it ?

How do you clean piston with out striping

When you use the raker gauge does it happen to bend the freshly sharpened tooth`s corner? or even knock it right off? it happens to me often and really i don`t press on the gauge i have tried so many ways of holding it......have you noticed it happening to you? i know the gauge is harder than the steel used for teeth...but maybe is bad design i don`t know

That's a great tip! Thanks mate!

Double, all day. I can move any direction at any time. Get into harder to reach areas with ease.

Thanks for the video. I have a 142 I'm changing the fuel line on and it has been giving me hell. That opening is so small, I've been trying to push it through with other things and all kinds of stuff. Don't know how I haven't thought to strip it down a ways yet but I appreciate the idea. Appreciate it.

Is there any charge level indicator?

How do you find the quality re performance compared to the cooper pegler? I like the cp15 performance but the carrying straps are rubbish and the sprayer itself is a pain to store. The handle locks down with no where to attach the lance. Cheers .

I have a Husqvarna 359 made in 2000. Bought it new in 01. Glad you didn't edit out parts where you were struggling a bit. I've been fighting this new fuel line and never thought to cut it in half a little before threading in hole. Also, the boiling water trick for fuel filter😊Cheers!!

Хочу купить себе такой. Хотел спросить как он в работе, удобный хороший.

Did you get these off AliExpress?

Cracking problem 3:17

Cracking problem

Thx the chest strap makes a big difference on my BR-800 X and keeps the pressure of my shoulders. There are two places the strap can be installed but I choose the one below the buckle and not above.

west coast saw makes a good one too thats made from good steel. alittle pricy vut i like supporting small companys like that

Hey mister RJL it's me again. Do you know if i can put the metal pieces back to the bearing if the metal on the ring itself is in good shape? I just bought a second hand hedge trimmer (old style) and everything looks clean and almost unused, but this tiny metal sticks are everywhere and clearly not in place. I think i'm going to try anyway because I think i have nothing to loose there if i don't turn the engine on :) I already got to putting it together but if i put all the sticks that fit they stop rolling, so i thoung maby remove just one to give alittle space? Thanks for your knowledge, have a nice week.

You go through this whole video and never give us a link to the replacement part. What the hell?

I have an original Husqvarna easy pour can, they are much better than their later model. This one looks a little better.

Like your style man

Let’s see some doublewide stripes

Did you have an Amazon link or anything for the pitch conversion stuff you put in?

Very precise mate 👍

Why not just give a torque setting. That would be most helpful

Thanks for watching 👍. Oh btw when i said to take the sparkplug out to check the blade, i meant just pull the HT lead off the sparkplug. 👍

Really great tutorial here. You do these so well. Cant believe you don't get more attention.

Great video - very well explained...thanks 🙂