วีดีโอ

It's one of the worst designs I've ever seen. Some other cars have this design as well. They can fk off . Good video btw👍🏽

Awesome thanks man

Did you replace the low beam or high beam?

Спасибо! Помог👍

Tks, excelente video!!!

Whomever designed this deserves to be sacked along with their manager who approved it. Look at Volvo V40 with two plastic wedges that hold the whole light assembly in place and access is from above. You can do the replacement at night, no tools, stay clean and standing up and swap over all in 1 minute - No impossible to understand hidden hook on the clip either. Take a look Mazda

Thank you good job

That black is bulb adapter, been replacing it for couple of times and much easier if you take out the tires, much room and clearer to replace it.

The clip has been the bane of my existence

Excellent video thank you!

Thank you!

Amazing video thanks very much

For those that have a Mazda CX7’ still, The easiest way to replace these lights is to jack your car up, take the wheel off and peel back the plastic fender. Makes it a easy minute job 👍🏻

well explained. Thanks

Is there a trick to pulling the blue wire off? I feel like I’m using enough pressure but it isn’t budging!

Is there any blinker lights on the headlights?

Took me 30min to figure out the metal clips lol

Thanks so much! If I ever get my hands on the design folks they will get strangled. Then strangled again for how ridiculous it is to change the oil. Again, thank you.

Cheers bro🔥😷

thank you so much.. and what about change the bulb from the drivers Side?

Very helpful video! I was able to replace the light from up top without removing the well cover in about 30 minutes thanks to the video!

Man my 2011 cx-7 GT Turbo headlights are totally different!! I don’t think I can replace mines myself

Can i replace it with LED H7 bulb ?

Sylvania h7 for outside and 9005 for inside on my son's 2010 model.

Thanks mate! I managed to do it blind through the engine bay because I could visualize it from this video.

Thank you!! The clip was giving me issues because I could see the whole shape of things. This was a massive help. I appreciate this so much!

Golf damn ... a 100years of automobility progress and still... this Fxxing clip/spring to hołd the bulb .. fuuuuu****k

You are the only one that shows how to remove the clip. Congrats and thank you

YOU!!! You made the BEST video showing the spring clip! Thanks 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

Thanks for this. Was a lot of help. I was able to do it from the top. But I did it blind with the help of this video. Guys hands may be too big to get in from the top. Couple of things. I had to pull the 'plug' the blue wires go into with slip joint pliers (make sure you don't catch the wires). Remove the soft rubber seal/casing out by sticking a screwdriver down the side and popping it off. A little bit fiddley but got there - all in less than about 20 - 30 mins.

that clip and alignment of the bulb is the worst design I have seen so far.

I cant thank you enough! I spent hours yesterday to get this done but no ou there video or instructions made it clear enough for me to figure it out. Watched your video this morning and after about 15 minutes got it replaced and saved me money and a trip to the dealership!

Great video! Horrible design by Mazda.

This was very helpful, thank you for the video !

Thank you

Super Good Teacher! Awesome Job! Great Video

Just want to make sure the bulb replacement for the low beam light is an H7 correct?

That will be very helpful, I plan to upgrade my low beams

Thank you!! The clip is a pain tho

Thank you for the video

Excellent instructions I was struggling with the clip from another video that didn't elaborate on how to remove. Thank you

Great video... got mine replaced successfully after watching it... Thank you.

If viewers want to replace drivers side low beam, this video is helpful as it does a better job showing the clip that holds the bulb in place. This clip is famous for giving people a big problem with its removal and many, many people have broken the plastic that the clip hooks into. Once the place is broken you will have to jerry rig a means to fix it. The most expensive way is to buy a whole new headlight assembly which is hundreds of $ and considerable work! So take care with the clip. It wouldn’t be so bad if you could get at it more easily but people have to work on this clip blind, not knowing how to push it to unlatch it. This video will help you understand this clip. If you use a screwdriver to pry it you might break it. This video shows finger pressure is enough if you press correctly. By the way, if you do break the plastic, another video shows gluing it with special glue for hard plastic. You will probably have to remove the light assembly to fix it, but you can fix the broken hard plastic. Better to do your best to totally understand that fricking latch clip.

If you really have patience, you can do the low beam light from the top also. Don't have to go from the wheel.

Thanks bro. Your video helped me with the hook on the driver's side.

Thanks great video(:

Is that the dreaded xenon bulb I’ve heard of? The one shops want to charge a fortune for? Is the concept about the same on a CX-5? Good video. Thanks.

Wow. What an ordeal. I am not looking forward to doing this. Great video. And very helpful. Thanks 🙏

nice job thanks