วีดีโอ

How to lift a car and keep it level on uneven ground?

This product works great for headlamps, cabrio rear windows, and all sorts of plastic parts, as long as the plastic material surface is exposed. If it is painted, like a bumper, then a regular polish should be used. Also, any print over the surface, like car buttons, must be tape covered. Otherwise, it will be erased.

This product removes scratches from my instrument cluster. However, the plastic looks dull. Do you have a way to fix this?

Holy shit man I really hope everyone watching is more careful than you are As others have pointed out the jack has to be sliding, the fact that you saw the car move that much and didnt find it concerning makes me thing those 2 jackstands missing on the shelf saved your life ;) Also, securing the car by placing the jack in the middle of the car? Mate, anything goes wrong that jack's arm goes straight through, or bends the floor in the best case

Yes, that plastic polish is the best. We have the exact same thing here in the US.

Bruuh! this actually work on Dodge charger after i messed it up with goof off! thanks man

Like the info, but please get to the point quickly, not all of us have time to waste.

Video starts at 4:30

excellent video but just curious ,does it work for piano plastic in the interior for say a jeep, i hope

2:50 how is this disturbing lol

will this work on info tainment touch screen center consoles

I was bricking it before starting this on my Nissan Leaf but your video gave me the confidence. It works a treat though and all surface scratches gone. I did it the same as I would on the paintwork. Medium pressure, keep the cloth moving and keep it wet with product. I’d do about 30sec polishing then wipe with a damp then dry cloth. I just kept repeating until all the scratches were gone. Instrument cluster almost like new again but it will leave slight swirls which you will see in certain light and angles so remember it’s a compromise. You can live with your current scratches that you see all the time or create loads more scratches that you’ll see only some of the time.

Dude i appreciate your help, im going to try this method but please get to the fucking point it would save us time thanks. 6:02pm 31/05/2024

Will the scratches reappear after a while? Also will this have be done repeatedly?

Does it work on car touchscreens?

Does this work on rangerover navi screen?

Doe it have to be that polish? I bought one that's a polish and sealant? Can I use that?

Oh my goodness buddy you really jacked it so high to put the back stand on? What the hell. Put the stand right where you were jacking from

Just as added safety, throw your wheels underneath the car laying horizontal. That way if the jacks break, you have a third safety.

Great. Gonna use this on a 42 year old tabletop retro game plastic screen. Subbed. thanks

I'm glad I bumped into your post. I was pleasantly surprised at the Meguires because I just purchased it. I was not as diligent as you, and felt a bit disappointment at the results, but after going back and spending more time with it, my panel is mint! Thank you so much!

thank you

You’ve got some great videos, shame you haven’t made more!

I took mine out and replaced it with glass that won't scratch. A lot easier than polishing plastic. You can have it made if you're gonna go that far. You can have it made.😮😊

Great video! Not just accurate & instructional, but I love the subtle humor throughout. Going to try this on my vehicle cluster like you did but also on the windscreen of my motorcycle. Thanks!

Any one see when he clean interior???

Just gained your 971st subscriber

How to Lift Your Car SAFELY (On Gravel/Dirt)

Thanks for this, I've a 2020 3 series , bought some Quixx acrylic cleaner. It says do not use on polycarbonate. Is the cluster acrylic. Even BMW HQ dont seem to know? Ideas appreciated.

I drive a Kenworth t680. I used to have a 2023, brand new, no previous user, but I had to give it up when I went in for hip replacement surgery 3 months ago. When I came back to work, all the company had available was a 2021 Kenworth. The dash looked like someone cleaned it with sandpaper. I tried this routine and it worked perfectly. Lo9ks like a new dash/bezel. The only correction I suggest is for the final cleaning with the PlastRx, let it dry, and wipe off the film with a dry microfiber cloth. It shines! Thanks for the video.

This fixed my Honda CRV instrument cluster a year ago, and just fixed my PSP srceen as well! I did exactly what you said, going to town on the scratches, and it looks much better than it did earlier, for sure!! Definitely going to throw a screen protector for that one, after fixing especially that super deep scratch that is harder to see now! Thank you!

i wonder will this work on my Touch screen Radio. I have a huge scratch that is very noticeable.

Does plast x work on scratched headlights

Great video. But I think you should make a final round with a finish polish like the Menzerna 3000. I guess the plast x is pretty much like an heavy cut polish. It cuts the big scratches but left the surface hazy. Adding a final step with a less aggressive polish would be perfect. On some car I guess you can add a liquid wax to add UV light protection and avoid future haziness.

the way the car moves sidways... yeah nah, you need something harder under the jack so it can roll under the car rather than the car being pulled toward the jack, maybe not too bad when lifting one end but lift the back end too and you're going to be putting a twisting force on both of the front jackstands :/

Viewing at 21k

Thx for the video. Just have to find that polish here in Australia. Cheers mate.

I was using pavers for the jack stands, but I will now use plywood for the trolley jack. the whole process of not having a level drive is irritating. I may be wrong to feel safer on a flat gravel surface than on a sloped driveway...I don't know.

Is there a coating out there that would prevent micro scratches from happening in the first place?

Great video. Would this work for car sat nav screens?

good video, thanks mate

heavy 4 by 4 or a van will cause jack s wheels stuck in wood and not rolling in to position. I mean wood, not plywood . Will plywood handle the weight ?

I could see a lot of scratches in the end...

years later, just did this after moving 3 ft of snow and the car was completely safe, I always push hardcore on each side panel to make sure it dont fall. Left it on stands for weeks in the snow, no issues at all.

But now you have massive fine wipe marks that make it hard to see cluster in certain sunlight. I rather have a few small scratches than that..

How do you remove scratches from inside of car windows?

What about concrete slabs?

You didn't have to get so violent with that knife!!!! 🤯🤯🤯🤣🤣

Great video! But you can achieve the same results with half the effort by installing a Screen ProTech kit over them! Bonus, the kit will prevent future damage as well 😉

I'm a fan of your humour