วีดีโอ

Why are all these vids for gaming, never on playing video's ?.

What about audiodg vs asio? Does it matter? Of course we should use the asio driver for the audio interface. Is it always the case that audiodg is used?

I can hear the difference with the preamp on the master bus through the speaker on my phone. Wow.

Good test and review. Searching for headphones for guitar now and that help me .

Cool video thanks. Never knew about this software. Why though are you choosing high on each setting instead of like “real time” or “critical”? Thanks

I love this videos of tests! the iZotope lens plugin part is pure ingenious and it is gold. But i really think you need to put 2 music tracks maybe a little part of a rock song to hear how thi model behave in busy tracks with drums, electric guitars and bass.

FSB Hydro Ti 1000w is excellent.

All i was hoping to do is run this box direct to tv to sound bar then i can hear good audio and atmos from tv content and out to ps5 amd xbox. Can that be done or it can only pass through one device?

Hi! Thanks for the video a lot! So,in short, if i come out from my isa one with a cannon and i go inside my clarett 8preusb with a jack in the mic/line input,i'll bypass the preamp of the interface??thank u!!

The build quality is not very good. The soft head part of these headphones came off after only two months of use. Personally, I don't find them very comfortable for extended use. However, they are excellent for mixing.

wow, Wow and WOW!!! You have covered some of the very core issues no one else has addressed in any easy to understand step by step guide to facilitate the best music production. THANK YOU!!!

Does it ever make sense to use an external dac and headphone amp? Like with a $100 umc404hd, also running to a Topping or similar low distortion higher power dedicated device

And crashes

Followed your instructions an now daw just crackles all the time

Using Reaper 7+ this can be done for every time without installing third party software. In preferences under General, (top), Click "Advanced UI" then "Restrict Reaper to specific CPU's". Follow the same process in choosing which cores click "OK"... Voila!!

Lovely video! i got these for 124$ and i've been loving them so far, but the sibilance is what's bothering me i tried to eq them but i always fail to get rid of that sharpness🙃

Of these two microphones, I understand that your choice is towards the Aston spirit?

When you restart the computer do you have to restart lasso for the settings to be active?

I don´t like them, they are too bright. hights are overpiushed. Very thin at low freq. Not usable for HIFI, also not for mixing as every track will be more dark as headphonce sound very '(too) bright. So I don´t see any application where I culd use the 702

I have the Ugreen Max5c pair of headphones. They were actually out before OneOdio focus A5 headphones. The only thing, the Ugreen pair is even cheaper then the OneOdio pair of headphones 🎧🎶

Can u suggest me one for vedio editing around 50$

I really like these...far better than the old DT770 Pro 80 OHM, strange mine are very good for music & gaming... they take a couple of hundred hours to run in...big difference after a couple of months of heavy Rap & burn in CD's...good cables, well made, horses for courses i guess, i A - B'd them both together, i use them mostly for PC & TH-cam...i luv them, there far better than the 770's...perfect for TH-cam etc...nice narrow fit, far better than the wider 770's...soz you did'nt like them they got some great review's...48ohm so easy to drive...the best closed back headphones i have heard under £300...i'll be keeping mine for TH-cam etc & online...they work well with my phone for Tidal music when on the go travelling etc...

I've been using this for 10 years and no regret! Great cans! The only thing I changed are the pads, but the new 3rd party pads are actually fit better, the only irreplaceable thing deteriorated is the coating on the headband padding which I don't really care much! I see AT released A70x or 80x something but don't really feel for upgrading since the current once are working like the day 1 (post burn in of course)...

Thanx Private Pyle..........

i pirate waves and i never accepted any coin in 30 years playing in the streets

thank you sir this is what ive been search before finally i got it😂😂

You Sir have got yourself a subscriber

Hmm..must remember to boost the lost highs on vocals. That was noticable even through phone speakers! A lil bit 'meh' compared to the original source recordings.

When you said "Denon receiver" it was done for me. The AV receiver's job is to receive the video+audio, so just hook it up to the Xbox 🤦

the last step won't save on your computer, you have to do it every time you restart

I just want a big fancy volume knob

I have a question, and I'll tell you it's the only serious channel on TH-cam about headphones, the rest are just opinions, yours is technical. From your experience, how does the variation in the headphone curve really affect the difference between what was recorded and what you're hearing on a headphone, could you tell me in which parts of the audio spectrum this influences the most? I'd like to know where I should increase and decrease the spectrum in my mixes so that they don't cause problems on different headphones. If you don't know, no problem, I'm using my AKG K240 mkii, my mixes have never been the same since then. Thanks for that.

I'm kinda divided on getting these, m20x or monitor 60 since they are in my budget. I am a beginner in building home studio, I'll need a pair for recording and mixing. Is monitor 60 sufficient for that purpose? Which one would you recommend? Thanks in advance.

Tracking with an amp cab mic'ed up it's not a big deal. Usually the cab is loud enough that you won't be able to hear the phones. Where you can have issua is tracking acoustic guitars with a condenser mic.

I own many headphones, hd 280 pro, mdr-7506, hd 560s, hd 25 plus, AirPods Pro 2, momentum 4. The set of headphones that are my number one for comfort and non fatiguing sound over long listening periods is the hd 280 pro, I use them mostly for listening to music and mine have been used everyday for well over 2 years now and still feel and look new, cable is in perfect condition and the pads are slight broken without any signs of cracking, I noticed when I first got them they didn’t have a lot of bass, but idk if it’s just that I gotten used to them or they have broken in really well but the bass on them now is perfect to my ears, nice and tight without being boomy, I can’t recommend these headphones enough.

Nice thorough review

which DI Box do you recommend to integrate within a DAW (Mixing) Guitar EFFX Pedals and Guitar Pedals in General ?

Great insights on the MDR-M1! 🎧 It’s refreshing to see closed-back headphones like these delivering both studio-level precision and an enjoyable daily listening experience. I’ve been using the M1 across various setups-from an iPod Classic to a desktop DAC-and it handles everything impressively well. Do you think it has enough clarity and detail to replace more traditional studio headphones, or is it better as an all-rounder? Awesome review-can’t wait to see more of your takes on professional audio gear!

I tried these headphones with a number of music genres, so hopefully there is something for most of you. I will say I found these headphones to be very comfortable for long listening sessions and their connectivity and battery life were both excellent.

Oh big an an up grade is the UA Volt interface to the Twin? Thanks for the video.

Boy, those sure aren't for my taste. They sound pretty muddy, with that extremely lossy upper end. Sparkle extracted. I'm not sure I've ever seen another headphone measure that badly, not just all over the place, but in some areas, off a cliff, so to speak. 20 db in half an octave is not good, unless you are a filter. Spec like they list those are useless, 20-40k means absolutely nothing only that they could detect some sort of noise coming out over those frequencies.

Doing a clean slate on my laptop this will be useful thanks

Been using this channel strip for a few years now to track vocals. No problems at all.

Hey Todd, my name is Johnny and I'm the freelance logo designer who reached out to you sometime ago, had you found the name for your rebrand yet? Te one I come up for you is called Toddio, I think it is nice, would you like to proceed with that? Todd's Audio Studio short formed into Toddio, very easy to remembered!

your hads are about to come out of my screen :-(

Do you have flat frequency response bluetooth headphones with ANC under $100 recommend sir?

I had a good time watching this review from you Todd, these headphones seem definitely for casual listeners. I would like to see you review the AKG K612 PRO, AKG claims that they "deliver natural sound imaging for professional monitoring" and that they have a "full, spacious sound". It would be great to see a review of those as well!

Would you take TransY or a Joe Meek SC 2.2? 🤔 Thinking about mainly the mix bus.

I have one of these…nowhere near worth the money..pretty useless

Would LOVE to see you re-do this headphone with your new measurement rig! Love your channel, love the thorough, consistent and succinct way you review and present measurements and audio demos. Especially now with the stereo examples with the Binaural head rig.