วีดีโอ

Thank you bro. Thank you for attention to detail

Do u only have to bleed the tensioner if u change it?

If you dont have exhaust even 50cc shoots flames

Does anyone know if there is a front differential fluid change on these SUVs? I have an AWD qx6o. I was able to locate the transfer case and rear differential but could not find front differential.

Great video, thank you!

How do I change the inside door handle. It doesn't open the door, It broke.

Great video, easy to follow. Saved me who knows how much for a visit.

Well I finally got around to doing it. Went fine. Thanks for the tips. The "user friendly " dipstick location was the trickiest part.

Overtime the hook becomes a problem. You can see how much it wiggles in the video even when new. Only gets worse over time. I ended bolting the back to the rack.

Thanks for the input!! This vid is a great fixer.😀

It's all about the contact points for the batteries.. clean them

Thanks for the video. Have you heard anything about replacing both drain plugs on the diff? Apparently the service manual says not to reuse them.

The p500 and p800 are supposed to be used dry according to the channel: The headlight restoration pro. You can see him demonstrate this kit in over 100 of his videos. I have some slight haze on the headlight im working on now as a beginner and wondering if I need to go over it again with 2000 to 3000 grit and repolish.

thanks man just did it myself worked like a charm, had a dead mouse in mine lol

I had a hell of a time getting the end of the box wrench on the castle nut. No clearance between it and the axle. It was the same with the replacement too. I ended up having to tighten it down with the open end as best I could. I did the complete arm (took me 7hrs or so - first real big job) to fix a clunk, but I don't think that was it! Dammit. 07 Si with 250,000km.

sorry bro...couldn't make it three minutes in. it was like Joe Biden telling a story.

Great job! This is probably the worst car repair I have ever had to do. Mazda did terrible with this design.

I think all this samsung appliences have the same problem I changed the fan back I. December and now I have to change the lights for the stove on and the drain valve on the dishwasher

I just happened to mine same left front burner. Thank you!

I bought the same cheap Chinese belt tensioner from RockAuto and was replacing it again inside of 6 months with one from O'Reilly and haven't had an issue since (over a year). Don't cheap out!

He did a decent job but to seal it. Mcquire has a spray Sealant that will protect it for at least a year. Try it. And when you use it enhances the light even mor

Thank you SO MUCH!!

Thank you for sharing

how long did this actually take you?

thanks a lot for this, boyo. helps a lot. lemme tell you. try going through thr car wash in 100 degree heat without a fan. i wouldn't recommend it.

Thank you for your help 👍

Man what a freakin hassle…. This seems like an absolute nightmare

What lube do you use for the sliding pins?

" Takes a little bit of finesse... but she'll come. " lmaoo

i just got a similar samsung stove. sometimes the right light comes on randomly (when not even being used) and sometimes its the left light! how could that be? all the generic videos i see point to the limiter switch at the actual burner. I havent dug into it yet myself but it loos like starting at the infinite switch is easier. thanks!

What size Allen key

um yup I'll be changing the whole tank , I have a parts car

Best video on this! Thank you

Auto zone $60 Amazon $14 ignition switch

Anyone help to get the handle out if it's broken inside the lock

What diameter is the tube?

Code p06db

I really take issue when people take it upon themselves to ignore the instructions and add there own interpretation how it should be done? I don't think the people at 3M will be pleased especially when you consider the cost of the time and money developing this foolproof restoration kit, I like many thousands of other people who took the trouble to read follow the instructions are more than happy with the results, As far as the grit sizes are concerned there perfect for removing old cracking clearcoat along with heavy oxidation!!! Yours didn't have this issue!!🤔😡

I hope you can help! Once i removed the door panel, the auto function for my window stopped working. Window still works, just not auto down/ up anymore

What was your mileage?

Nice video. What kind of a socket handle is that?

Nice video but since blower motor comes out from passenger side you don’t need to take brake pedal off only gas pedal to make space and been able to take connector and turn blower counterclockwise and pull it ,please don’t pull brake pedal so much trouble if you have time and want to be able to get your complete body under the steering wheel ok do it but it’s not necessary

Can you show me how you got the back bot on the passenger side

A little late to the party. You my man are a Gentleman and a Scholar. Just what i needed to see. Thank you for the tutorial.

what were the symptoms that lead you to this? i have a 2010 mazda 3 base and the fan speeds all seem weaker than they used to be. all the speeds work, but just not as strong it seems. im wondering if somehow the resistor is dying, or if its the motor itself.

Miss the days of just having to drop the glove box and undo some bolts to replace blower motors…

C clamp and a piece of sheet metal will work instead of renting that decompressing tool!!! I always do that method lol

Does this apply if all of the faucets start out low pressure?

Where would the blower motor resistor be located. My Blower motor is fine but my resistor is malfunctioning. I cant seem to locate it. Thanks for the video.

You got rip off :-) I ordered one from Walmart for $20. Amazon has it for $35.