วีดีโอ

We ran a stock Navi that day and it was 5.25hp, mine was 7.32 hp. So around 3hp or 57% more then stock.

22rpd, I would’ve done it myself but the xdf files and such aren’t really available publicly.

Most of my stuff is from there. Just do some research, contact sellers if you have questions, read descriptions, just all that type of stuff. Both exhaust setups I’ve had are from there, my dash, my brake levers, etc. there’s alot

Just go on Amazon or aliexpress and search pro taper bars. Tons of ads with the bars, grips, foam piece, and the adapters. You will need new bolts to bolt the bars onto the Navi but it’s cheap to find new ones. Downside js the bars are so low they can hit the panels of the Navi, this makes the bar lock not functional, you can get risers instead to raise it just enough to make it work but theft isn’t a issue where I live really so I haven’t been worried.

Ikr, and one of my mod was a ncy clutch, I was one of if not the first to comfirm gy6 clutches fit the Navi to help people avoid the website markups like reckless etc. I just have a stock clutch bell which idk if it shows in this video but it’s painted to fit the theme of the bike.

Go look at my other videos from reference and check out my top speed videos of 68mph on my Navi flat. I confirmed with with the dash, gps speedometer, and later on a Dyno run I have uploaded as a short.

Thank you!!! That one’s actually my dads he got after liking he liked how my e46 felt driving wise, I now have a manual e92 as my other vehicle apart from my Navi.

Aliexpress!!!

Kmh rn, I recently was sponsored by the seller of this dash with a newer version (I made a video on recently) and I asked if they’re making a mph version and they said yes. I’ll probably make a post on the Honda Navi subreddit when they do.

@@silas.andersonthanks

Tbh wasn’t bad, just a afternoon project too fill some free time.

@@silas.anderson I wish I had the patients. I have handlebars and lights coming Friday, I have a feeling that will torture me enough lol.

@@JacksonD2 just relax, put on a show or yt video you like and just try and enjoy it or enjoy the new experiences and the fact you're learning stuff.

I listed most parts in the video I did a walk around and talking about how I hit 100kmh on my Navi from a year ago roughly. It’s also on the Honda Navi subreddit.

@@silas.anderson ok sounds good thank you

Oh sorry I didn’t realize you commented on the video I was talking about. Here’s the post I listed all the mods, or most of them other then visual stuff. Mines the red bike. www.reddit.com/r/hondanavi/s/hcqsrD2geA

@@silas.anderson thank you

@spencermcintosh5631 ya np!!! Hope it helps

Fair

What speed do you hit? Go on the sub Reddit, I posted my Dyno sheet there as well as all 4 Navis we ran on the Dyno that day in 1 video. In the Dyno sheet it’s mixed between the brown Navi and my runs, his is the 6.44hp i believe and mine is the 7.32hp at 67.5mph

@@silas.anderson beast

Thank you!!

@ welcome bro. I tried to message you on Reddit it didn’t let me. I wanna have a talk with you about my bike . What’s your name on reddit

@ you found it don’t worry

This stock Navi ram 5.25hp someone with an intake and exhaust with bad jetting ram 4.9hp, and mine ran 7.32hp at 67.5mph. So I have 3hp ontop of a stock one. I’m at higher elevation too so at sea level I’m sure it would be even closer to 10 since some stock Navis at sea level apparently run 7hp.

This one’s completely stock in every way.

I personally don’t think it’s bad. But it’s definitely much more louder then a oem exhaust. There is a baffle for it to make quieter and it for sure helps but I like it like this. I also have a video I just uploaded yesterday of my bike on a Dyno going top speed to give you an idea, it is in a small indoor room tho.

Here’s a comparison of the 2 in the same room, Dyno, and same phone. Second view of Honda Navi Dyno. th-cam.com/video/aJnSBsNCu-I/w-d-xo.html Stock Navi Dyno. th-cam.com/video/BMl5KSqzYmM/w-d-xo.html

@@silas.anderson Thanks

@AspirantVeeVee np!!!

This is an older video, go look at my 111kmh on dash and 108kmh on gps video 😉

Thank you!!!!

Ya np!!!! Just really wanted to compare the two for people worried about visibility and provide info on both to help people make decisions.

I agree, I was going to try and cover/remove that logo but I felt like like just focusing on the install for now. And thank you!!!

I am, looking out for this

Check your connector for the headlight. I’ve never seen anyone with this issue before and I just finished doing another newer dash mod recently without issue. Also make sure the bulb isn’t burnt or something too.

@@silas.anderson what color is the conector from the digital pannel cables ?

@deeswaveyy5014 what do you mean? Your headlight will work even if your have no dash installed. The headlight is based on its own circuit I believe.

I can try and help you more if you contact me on Reddit, my username is u/silasanderson2. Send me a message and pics of your wiring and I’ll try and help as much as possible.

I agree, as long as you take your time it’ll be ok. I’ve done this twice now and one variator has nearly 7k km’s on it alone with zero issues. The other is around 2-3k kms. At worst you don’t gain or lose anything, at best you gain some top speed for a couple mins of your time 🤷

Yep kmh, I also have a second video I made a few days after of a even higher top speed. I think it was 67mph.

Yes there’s that metal cable that screws into the dash. That’s for the speed. Make sure that’s all connected right and properly. It’s the thing I’m installing at 16:30. Make sure the cable is seated in properly.

Ya it’s kmh only so far. In a week or two I’m making a pt2 or second video on a new dash I found. I think this one in the video looks better but the one I’m going to make my new video on should be insanely visible during the day. It uses the same type of screen that my tachometer in the video uses. You do have to install a magnetic speed sensor but it doesn’t seem hard to do, the backlight color you can also change and everything on the new dash and possibly show your rpm’s on it which skips needing to get a tach!!!!

Set what up, the bin file?

@@silas.anderson please can you give Instagram

@@silas.anderson yes

@@silas.anderson please can you give me your email address

@angry_bullet_pro_chip I definitely could send you some files. It’s been forever since I did this stuff last so no promises it’ll be the exact tune in this video but I definitely have tunes that do flames and stuff while driving and everything. Go on Ms4x.net, join the discord and find me there under Silasanderson and I can send you stuff there.

Yes ms43.

I believe a 130/70-10 kenda.

Well in that case why look at upgrades labeled at cheap and not free 😂 $50 Canadian is cheaper then most games now for example.

Keep the setup you have now id say. Are you hitting the rev limiter and what speeds are you hitting? Also only oem part I strongly recommend is the oem variator if you’re chasing top speed. The clutch and clutch bell should be fine even tho I personally am not a fan of s23 stuff but it’ll be better then oem clutch setup still. If you are really chasing the perfect setup you could fine tune you’re weights and everything but me personally 12 gram is so close to 11g it wouldn’t help significantly. If you wanted sliders for example in the future maybe try 11g which is what I’m running and they do great but I also weigh barely anything compared to some people.

yes I’m hitting the rev limiter I think but also no tachometer. I’m hitting right at 55-56 downhill. Okay I will keep that in mind and same, a buck 30 this way. I’m looking to hit a good top speed maybe 60-65

Do the sharpie trick on your variator. Maybe you’re belts not travelling all the way. If it’s not you should actually get heavier weights.

@@silas.anderson appreciate it, thanks brother

Ya np!!! Lmk if you need more help or have any other questions. Always here to help.

Which washer? If you’re thinking of like the washer found in like a Yamaha zuma cvt the Navi doesn’t have one.

@@silas.anderson isn’t there washers or spacers that fit into the middle of variator where it meets the drive spline ?

In a oem Navi cvt there won’t be, or shouldn’t be at least. But if there was one yes removing it theoretically should help top speed wise

@@silas.anderson so if you keep the variator stock, don’t grind it, use a mix of 10 gram 13 gram sliders , do you think it would give you the gains in top speed? What about using an S23 variator with slider weights ?

S23 variator is not good. all my testing I did with it, and it just barely could break 97kmh on the dash at best. Also I’m running modified variator and 11g sliders, no issues or anything and it works amazingly. And I just mean there’s no washer at all in the cvt when it’s stock, maybe if it’s a used one and someone shimmed it before but I don’t recall a washer at all in the whole cvt system on the 3 Navis I’ve worked on. Only time there was washers was with a s23 variator or me installing one or two for testing only

That’s still sick 🤷

Thank you!!

I got it from here, soon I’ll make a second video on a better one. a.aliexpress.com/_mrkxtyG

Not sure what you’re saying sorry. But if you need parts from what I can understand phone the local Honda motorcycle dealer you got the Navi from or ones that sell the Navi. I needed a new cvt cover incase I messed mine up making my clutch cover cut out and it was $60 Canadian for the whole metal piece.

It’s all listed in the description, I don’t think I’m missing anything other then visual mods.

You’re literally the one person to say this ever on any post about bars like this I’ve seen. 😂 The reason for it is to get you more bent over in a better position and not feel like you’re sitting completely upright like oem.

Ya I looked back at it and I was thinking the same 😂 but tbh if the handlebar bolts can hold a lot of pressure, the backs can too. The backs are much much larger then the handlebars if I remember correctly and 2 on each side.

I honestly can’t remember, but it was a guess that 100% isn’t right. Also jetting depends a ton on location, temp, humidity so I suggest learning yourself to tune a carb especially if your modding your own Navi and stuff. It’s a lot of effort to do so but very worth it.

Thanks for the suggestion.

I didn’t buy it, there’s 2 oem ones there both I made. The first one I made way way back when I first got the Navi and way before my TH-cam channel. This video was using a friends oem one as a demonstration. But trust me it seems scary and daunting but it’s super easy honestly. At worst buy a second oem one straight from Honda to do it on. Just call the local Honda motorcycle place and ask for a variator with a part number or something, it won’t be much I assume. A whole cvt cover for me to make my cvt cut out was like $60 Canadian.

I could find the bin possibly. I have a e92 now so I’ll have to find where the files are. But I should have screenshots. Here’s a lot of tunes though from someone else: drive.google.com/drive/folders/1wUAl0_nShfWyPIFno8pYVGzswiA5_J7y

All my mods are listed in the description, in my first video on hitting 100kmh/60mph I did a walk around listing all my mods too. It mainly comes down to cvt mods and having that setup perfectly, the rest help but for your actual top speed your cvt is the limiting factor. The rest just add power to get to that speed faster or easier.

It’s not lowered. Still oem height, only thing is maybe a thicker/bigger rear tire helping it look lowered.

@@silas.anderson got you..what size tires you running..looks sporty with the wider tires

I totally forget rn but I believe it’s listed in the comments on one of my first videos about hitting 100kmh on my Navi and all the parts I had installed.

Yep this is true, but he wouldn’t be able to do a top end rebuild either…… plus with the abuse he does to this honestly just wait for it to be completely done before considering that. Also what happened was the filter broke/fell off the carb and got stuck between the wheel and case of the engine and he didn’t realize, I don’t think it was ran lien that for too long but either way not good at all.

I wonder how the yumi big bore and cam will compare to this set up. Should have it done this week.

I hope it goes good!!! I want that setup so badly but just cant. I don’t even have a Cdi yet and I’ve been needing to for like a year now. Btw found a new dash 😉 it’s similar but uses the type of display that my tachometer for example uses do visibility should be amazing, it uses a magnetic speed sensor tho I believe

And ikr!!! Something about yesterday just for whatever reason was the perfect temp, little wind, everything for a top speed run. Not a significant amount more then my last top speed but enough to matter just that little bit. It’s insane the difference between my Navi and my friends brown one. I’ll try and film a dedicated clip to showing that. Both top speed and from a stop as my last clip I tried to film had a messed up angle of course like most of my recent go pro clips.

@@silas.anderson honestly dude, your set up is solid and the most tested so far. Wouldn't stress on the big bore till theres at least a bit more testing done. You got plenty of time to get it. Enjoy this set up for now! Its fire Stoked to see the dash. This ones nice but does look tough to see.

Ya, one mod you can do is swap the plastic “glass/cover” from the oem gauges onto this one. This one has a pre tinted one but the other one being clear could help a ton!!! Plus adding a windshield like your setup that kinda seems to cover your dash from what I remember could be insane. I’ll hopefully end up getting the new dash, made a deal with my friend that if I don’t like it he out right buys the new one from me or if I like it he’ll buy my old gauge for a discount.

Ya the gps is still more accurate I assume. I use one called diablo super biker which maps out where you go and a ton of useful stuff. And then one just generic app called speedometer. Both free on the AppStore. Also either way I’m super impressed with 108kmh for a little bike with no gears and still a rev limiter!!! Also found a new dash that seems more readable for the same or similar price, might make another dash video in the future on it!!!!

Ya I don’t doubt it, I just personally have no experience with Chinese carbs. But I do have a ton of Chinese things, my whole Navi is basically 😂