วีดีโอ

Sounds good! I’ve thought about doing it to my 4th gen V8. Stock cold starts roar I can only imagine a delete

How many quarts to the front?

probably the most in depth, step by step install ever!

This is a lifesaver. For 2 years now, I've been using the one Perrin makes that utilizes the towhook mount. I just recently installed my Process West FMIC and had to remove my front brace bar, meaning I cant use my Perrin License Plate Relocator. I also have a wired-up LED feont and rear plate through Illum Industries, so I kind of want my plate in that spot (that and I don't want to be harassed by law enforcement). I stumbled upon this just as I was about to give up and it's on the way now :) I'll be making a very small notch in the bumper in front, on the bottom of that outer plug, just to pass my wiring through, and will maintain the front license plate with LED functionality. Stoked!

Incase it helps anyone i bought even more special spark plug sockets. SWIVEL HEAD SPARK PLUG SOCKETS 15$ PACK OF 4 AT NAPA. Made the second attempt alot easier. 1st attempt i tried to cut corners and do the plugs from the bottom with the car jacked up so i didnt have to take anything off like a sub tech suggested but i got my regular S.P. socket stuck😂 took 45 mins to get it out and i was like hell nah 😂 put that coil back on and called it a night with just an oil change 😂

Ive had my sti for about 8 years and my TC button just doesnt work, cant turn the TC or hill assist off

Really appreciate the comparison part of the video. Definitely t says a lot on the difference between the two. Great video. New subscriber.

Taking apart the whole console will prob make me not do it

Mine is 2016 crosstrek and has starlink app on it but it doesn't let me to have access since this version of is not giving this service which doesn't make sense at all

I know this is an old video, but out of curiosity, how much $$$ do you think you had in your STI at the point this video was made? Any internal mods with the ETS system?

I wish I knew about the plug and play kit before I took the bumper off, thanks for the video

You should be describing what each port does would be more informative

just sayin, could of used adhesive velcro and stuck it to the back of the strips for the back seat.

Hey what kit is this ?

It's weird that none of these cars come from the fa tory with footwell lighting, or lower door lighting. Is it really just the dome light and 2 small map lights for interior lighting on the 2015+ wrx?

Does this hook up to the stock fuel lines?

Great video, had a hard time finding this version for some reason

How much did it cost for you to do both?

Can you remake this video please

Thanks man. That crap was eating my clutch up prematurely

What did you do with the evap line? Just run a new line from the solenoid to the firewall?

best tutorial on yt

Podrías poner el link de las mangueras ?!!

Good to see you back on youtube!!

How did you connect the hose to the wastegate? Looks like very little room to work with in there. First time I’m doing this and seems like every video skips this part.

Great video. I had to invest in a smaller 3/4" torque 80 lbs and 1/2' torque for stuff up to 150 lbs. I work on my Acura, Subaru, Ram Promaster and now the new Tundra. Might need to get an even higher torque wrench for some of the Ram and Tundra nuts.

need a tutorial for 92 4 runner 😅🙏🏽

Great tutorial! Really liked your choices for the music too 👍

Damn you make some good videos!! Keep it up, love watching your videos!!

This is good info!

Sheeeeeesshhhhh

Don't use iridium Ix... Wtf

Ew good way to scratch it. I mean i know its not paint but still. Just start dry scrubing on it? Yeah no. Also 4 months?! How do people just let stuff go like this. You pay good monry for something nice and shiney and then not maintain it. 4 months? It looks like it hasnt been cleaned in 4 years

11:19 big mistake not putting the heat shield back on. You’ll cook your clutch and brake fluid reservoirs.

I was watching your video here on how to remove the intake manifold so I could upgrade to the cobb 20g

did you have to cut a hole and weld a bung for the IAT sensor? does the ETS piping come with that bung?

Thanks for the video man. I like how you laid out the tools in the beginning for what we need.

Why was it reading 10.4???

20 seconds in and you call the circulating blower valve a “waste gate” dummy

sold the STi?

Does anyone know if we can inatall a navigation app from some other source besides starlink??

Where can I get the turn signal wire harness ?

Four years later and this vid was the one 🤌🏼 only took 8 hours. Quality walkthrough

Make a bezel video for a Subaru legacy replacement

give me your shirt your wearing, it looks dope

You are seriously a veteran. You’ve been doing videos for so many years now, tons of them helpful and unique. I think you mentioned you live in Utah in an old video? Is that true?

what piping did you use and what tip?

Subaru starlink app doesn’t exist in store sooo trick for that unless I’m stuck with Apple car play and using Waze for GPS like I have been

sick video!! Can’t wait to see more

I’ve been wanting to put these on my Rav, thanks for the detailed installation video! 👍