วีดีโอ

@@ayoubk7178 glad it worked mate on what car model /radio model you installed? The hardware is limited to wired only, will not support wireless via update i am afraid.

@@CostelTarata ID du modèle DCU : 17TDT1EU-CAO1. Do you know if we can add navigation system only by programming

I cannot help with the Japan made cars mate. I am sorry.

Hi there, there are some steps tp follow to cover that error. Make sure to follow them. Also what car and infotainment system you have ?

@CostelTarata it's a toyota corolla 2019, panasonic.

@@constan1998 unit version is listed in my description?

@@constan1998 then it should work. Follow the steps in pinned for the error 001 given and then do manually activation!

@@constan1998 this one: For those having Panasonic UNITS, specifically getting the red screen and 001 ERROR, try again using this potential fix: Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. PS: if not automatically detected, after connecting the phone via cable, go to the infotainment, sources and click on the USB (your phone). That should kick in the process and press Always on when prompted so you don't need to do it every time. let me know if worked and what model infotainment you had before, and what is now

Enjoy it!!! Leave us the car model and unit!!!

@@CostelTarata 2019 Rav4 EU - 17TDT1EU-CA01

@@BoiNtss tre sa descarci arhiva si descarci continutul direct pe un stick proaspăt formatat. Update up o sa il selecteze singur pe cel bun. Formateaza stick ul in FAT32, vezi video cum sa faci pasul asta. Spor la treaba! Sa lasi la urma modelul masinii si unitatea radio pe care instalezi.

​@@CostelTarata imi da o eroare cand bag sticul scrie " Nu exista softwre nou sau suportul media nu este inserat" 17TDT1EU-DA02

@@BoiNtss verifica pasii prin care ai facut stickul.

​@@CostelTarata am facut pasii exact ca in video doar ca mie la propietati imi scrie exFat nu Fat 32.

@@BoiNtss de aia nu recunoaște stick ul. Trebuie formatat in Fat32 stickul si mai apoi extragi continutul din arhiva in stick (fara sa creezi foldere)

Just follow the steps on my video and enable subtitles in Spanish ! It should help!

@@CostelTarata Thank you very much, you are the best, you have made my life happy, it works perfectly, I am super excited, thank you very much

@@alejandrodelgado4926 glad it worked mate!! Don’t forget to leave your radio unit model, for others to know

Incearca si vezi ce iese. Verifica modulul audio daca este la aceasi versiune si dai bataie!

Perfect, mersi mult!

Many thanks to Costel this method worked on my Toyota Corolla excel. Model id dcu 17tdt2eu-da01 Audio : 1020> 1023 The only way to operate CarPlay on mine is I have to press the phone button on left side of steering wheel the car play pops up it’s nowhere on the infotainment system

@@mohammadahmad9544 glad it worked mate. Not sure why exactly is not appearing elsewhere, search through settings perhaps. Nonetheless better than nothing!

@@CostelTaratajust tried it with a android phone. With android phone it’s under source > usb (phone), once you select this android auto launches. the phone button on steering wheel does not work on a android phone I have set it as auto launch when connected to avoid having to manual launch Everytime. With iPhone I have located it under source > usb (phone) > scroll down > car play alternative can press phone button on steering wheel and it launches it or set up as auto launch. This car play is nowhere in settings. But am glad it works many thanks again

Massive shoutout to Costel! You are a legend. Followed the same steps mentioned above and deleted personal data and restarted the unit. Apple carplay was spot on. Thank you 🍻

@@aashishudayabhanu glad it worked mate. Leave us the car model and radio model foe others like you to follow

@@anonim7800 macar ai avut de unde sa incepi si motivare sa continui. Trimite si mie linkul de downloadare pentru cele 2 sa le postez aici pt cine are nevoie !? Ma gasesti pe insta sau facebook sa mi dai linkul, daca doresti!

Sau aici

@@kacperzakrzewski5028 what car model and what radio model you have ?

Im afraid only for EU spec cars mate, as the option was not available from factory as in Asia or Americas

Try these steps: Issue: Stuck on line 69 DCU [REPRO] Vup Completed. Steps Taken: 1. Format USB Drive: • Formatted a 32GB SanDisk USB to FAT32 on Windows. 2. Load Files: • Transferred all USB 3 files to the prepared USB. 3. Delete File: • Deleted the “phaseup.dat” file from the root of the USB 3. 4. Start Update: • Inserted USB into the car and started the car. • Waited for the update process to complete until the blue screen displayed “successful.” 5. Post-Update Check: • Shut down the car, removed the USB, and restarted the car. • Checked under Settings -> General -> Software Update. • Noted that Audio 1011 was missing but 1020 was present. 6. Verify Model Information: • Checked Model Information and noted the DCU model number and DCU Part number (e.g., 86140-02740). 7. Update Files on USB: • Inserted the USB back into the computer. • Navigated to the folder VehicleParameter -> DCU and found the noted DCU Part number (e.g., 86140-02740). • Opened DCU -> FactoryID and edited the “env_pana.txt” file. 8. Note New Model Number: • In the env_pana.txt file, found the line “VP_PANA_model_ID=” and noted down the model number (e.g., 17TDT2EU-DA30). 9. Replace DCU File: • Deleted the file corresponding to the current DCU model number (e.g., 17TDT2EU-DA02) from the USB. • Renamed the file with the new model number (e.g., 17TDT2EU-DA30) to the name of the deleted file (e.g., 17TDT2EU-DA02_7910.kwi). 10. Final Update: • Shut down the car, reinserted the USB, and started the car. • Allowed the update installation to complete.

@@CostelTarata I did the first step as you instructed me. I finally got a blue screen that the update was complete. I removed the usb, turned it off and started the car again. Nothing has changed. I didn't understand the second step you explain and unfortunately I still haven't succeeded. Until I finally saw that the update was complete I was happy but still the version remained the same and I still don't get Apple Car Play

@@idanabuh2 press and hold the voice command button on your steering wheel mate with the phone connected via wire and see if CarPlay pops up

@@CostelTarata Sorry for my stubbornness, I really want to succeed. At first I did all the steps and the update was stuck at 69 DCU. After deleting phaseup.dat, finally for the first time a screen appeared to me that the update was complete. I removed the usb, turned off the car and restarted it. The version still remains 1020 as it was before. I didn't understand what to do from step 9 that you wrote for me. In addition, after performing the update and restarting, I tried to press the voice command button, but nothing new or Car Play appears there. In the end, the system records in blue that the update was carried out, but nothing changes. I would appreciate your help, I really want to succeed.

​​⁠please after connecting the phone go to the car media, select sources, and select the iphone (usb connected) this supposedly should work. When prompted please select always so then when you connect the phone will start automatically. Fingers crossed 🤞

I guess only at dealership. I did found however the update from toyota website for NA market. Make sure to check toyota.com

😎🤘

@@rotemefrony6499 empty and formatted fat32 mate

Glad it helped

@@robkody33 make sure to follow any steps into enabling your phone for Android Auto. Also use original phone cable.

@@robkody33 try holding press the voice command on the steering wheel while phone is connected via cable.

@@CostelTarata i tried..no success... unfortunately, seem like not working for any Camry with Denso/Fujitsu units

@@robkody33 others have tried after connecting the phone via usb, go to media sources select the phone connected via USB and hopefully then it will be starting for the first time. When prompted set to automatically connect. Fingers crossed

Im afraid not mate…

Did you prepared the usb as guided? If so try the steps in my pinned comment on top, perhaps will work.

Did you prepared the usb as guided? If so try the steps in my pinned comment on top, perhaps will work.

@@CostelTarata He changed version from da02 to da30 but it still keeps turning on and off repeatedly. What to do? Which file to put? There are three da30 files there, there are three numbers, 6000,6001, seven thousand and something. Is there anything else to do?

Hi Costel, first, thanks a lot for doing this! I've just tried with my 2019 Corolla but unfortunately it didn't work. The model is 17TDT2EU-DA01. I got first the Error 001 message and proceeded to use your fix, the software was updated sucessfully because the Audio version changed (was 1011 and now is 1020), but nothing happens when I connect an Android phone. I've tried with a Xiaomi Rednote 10 and a Samsung Galaxy Note 20, both with original cables. On Sources, the USB option is disabled, I can't select it. Looking back at the video again, when you show that after the update in the software information is saying it's an open source one, on mine nothing changes, it's still the same as before. Found another person commented that his Audio was upgraded from 1020 to 1023, mine is still 1020 after the update... Any ideas please? Thanks.

Found another person with the same DCU unit as me but apparently he used 3 USB sticks and in your there is just USB3... Can you help please?

Hello Costel ! I have the same problem that @ozkneto, my car is a Toyota Corolla 2020 with a Panasonic UNIT 17TDT2EU-DA02. In first, I've got the 001 ERROR and I'd fixed it with your message, after that, the upgrade was a success with a blue screen, I restarted it and I tested it and it's not working actually, with any type of phones, I tried iPhones and Androids but the system don't recognized it and the CarPlay/Android Auto don't start. The system upgrade seems to be installed successfully because Audio version is now 1020v... Do you have any solutions for us ? Thank you!

@@ozkneto make sure to use original cables for your phones. Aftermarket cables might create issues. Also check videos over how to enable CarPlay or android auto. To enable it from TH-cam phone if needed. Fingers crossed!

@@ozkneto that is a longer process mate and i do not have the other usb’s as I didn’t need them

incearca, si daca da eroarea cu 01 la final foloseste pasii de mai jos. Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

@@CostelTaratathank you for your reply I have tried it this method way it does pop up as new installation complete to turn car off then on which I did then deleted personal deta but car play still does not come up I will try attached pics

⁠@@CostelTarata my infotainment details before and after. Model id DCU: 17TDT2EU-DA01 Model id MEU: 17TMT2EU-FA00 Audio : 1020 > 1020 Navigation : 1512 > not showing anything now Navb_version : 943 > not showing anything now After installation message pops up “new software installation is complete, please remove USB device and then turn off/on engine to finish the installation” I’ve done this still no car play I have also followed new instructions and deleted personal data and connect iPhone with original wire still no car play

if the application was successful, make sure to manually select ypur iPhone from media sources. CarPlay should then start and select to automatically connect next time. fingers crossed

@@RobertAndrei-pj4ne salut, sunt unii care au reusit si altii care nu, din pacate Nu cunosc exact de ce si cum.

Am inteles. Multumesc oricum

@@RobertAndrei-pj4ne incearca pasii de mai jos: Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

incearca sa connectezi telefonul cu cablu, dupa mergi la Surse media si selecteaza manual telefonul. Daca update ul a mers ar trb sa identifice acolo CarPlay. fingers crossed!

daca ai incercat pasii de jos si sa instalat update-ul, insa nu porneste automat. mergi la surse media cu telefonul conectat si ar trb sa il ia de acolo manual. dai pe mereu conectare si dupa ar trn sa inceapa singur.

@@Legokidsplay salut! Am instalat pe Yaris, Yaris Cross și Corolla. Teoretic, ar trebui să meargă. Dacă nu merge, trebuie să faci rost și de celelalte două USB-uri, pe care momentan nu le am, căci nu am avut nevoie. Încearcă și, dacă nu merge, nu o să strice nimic.”

Am încercat.. nu merge , da eroare la sfârșit.. mc mult de tot de info !

@@Legokidsplay Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

incearca pasii de mai sus, in legatura cu eroarea ca sunt unii care au reusit cu model radio ca al tau.

According to BE_00439T_TME pdf (search online for it) you'll need three USB sticks (for non-navigation models, one needs only the 3rd stick). I did it on my 2019 RAV4 with navigation (17TDT2EU-DA02, manual/petrol) and now have full Google maps and Nokia/Here maps via Android Auto. The procedure will take more than 1.5h so be patient: never disconnect till instructed so!

I installed im cars with navigation as well mate. And worked using the same USB i used in the video. Audio: 1105->1257 Navi: 1512(remained untouched) as only the audio module gets updated

@@at5dapa1 USB 1 is for US models, and 2 is for Asian models, USB 3 is for EU spec models, you do not need the others unless car is import.

Cheers mate

Thanks

Happy that it worked mate!!

Mate, it should work for your car. This multimedia unit you have from factory in the car will not support wireless CarPlay or android auto. Playing music from your phone via CarPlay is actually of lossless cd quality audio, unlike bluetooth or standard mp3

This is an amazing description mate. Hope it will be useful as well to others!!!

Hi, where exaclty is BE_00439T_TME pdf ?

Hi can you please share the others USB? Where's this pdf file?

@@ozkneto find me on facebook mate, got the pdf

Do I need to delete the files from the USB first which do not relate to my DCU model?

Not necessarily, but you could try mate. Make sure to let us know!

@@lw435 try this potential fix: Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

Mate there were pol here who managed to get the update done. Not sure is only the maps. Nonetheless. Get in touch with the ones that did it perhaps for an insight

@@CostelTarata yep, I confirm that in Toyota service. To update the SW version in the device with Navi, a map update is needed.

@@danielpieniak1656 facing the same issue. How to do the map update?

Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

@@aashishudayabhanu Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

Did you try installing this ?

@@rammahali7254 no i didn't. Cause the model is different.

@@silvioperezj.d6872 could you help plz Mr Costel?

Not going to work mate. This firmware is only for eu spec vehicles i am afraid.

Glad it worked mate! Enjoy your updated unit!!

What was your model unit, and as well what was different perhaps others got the same and unsuccessfully completed!?

@@CostelTarata model Number: 17TDT1EU-DA31 As I said the process was different. In the way that I turned the engine on first and at the same moment stuck the USB stick under the Multimedia unit. Then the multimedia restarted. A few seconds after a grey screen appeared with all the information of the stick. For at least 20min I did nothing other than wait for the process to end. In the 20min the multimedia restarted multiple times. At the end I was asked to turn the engine off and on, so that the software could be installed. The rest is history 😎

Try updating the software mate, and use a stabilizer/ gimbal

Check the unit model mate and if similar try updating!!

If ia the same infotainment unit, then yes.

Hi there, in the description of the video

@@CostelTarata thanks

I'm trying to buy a rav4 2019 for my surprise only carplay is supported in the head unit,that solve the problem,so if update the software will support Android auto?

Ma bucur, ce model infotainment ai ?

I am afraid not mate…the process is the same as long as you can find the correct KWI

Glad it worked mate ! What car model and unit you have?

Rav 4 , And the same media version as appears in the video

Hi for some reason it didn't work for me - I thought it is because I am in Israel... so I guess that is not the reason..

@@rotemefrony6499 איזה סוג רכב?

אני מעדכן בקורולה 2020 , עולה לי המסך שמריץ את העדכון אבל לאחר הפעלה אחת שהוא עושה כביכול הפעלה מחדש הוא נתקע על המסך של העדכון. חילצתם את כל הקבצים מהתיקיות או שהשארתם אותם בתוך התיקיות ? מישהו יכול להסביר איך בדיוק הוא עשה את זה ?

Sorry to hear about that buddy. Is your car info unit listed in description? If so then I would recommend retracing the steps and redu the USB, with the hope that this will work. Let us know the model of car you have.

Model is 17TDT2EU-DA01

This is happening with me. Do you have one solution?

@@lucascasimiro8555 unfortunately not yet

Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

Yes, that is correct! The one the tv came with initially!

@@CostelTarata yes that is better

Not really know what could be the issue mate. Try a different usb prepared on a different PC? In personally installed it following the same steps to many cars, including Lexus, with and without navigation enabled from factory. Let us know if you tried again and as well the car model and unit. Good luck

Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now

The update should only be found manually and not automatically. The firmware is for the audio unit only, so at worst, if something goes wrong (which shouldn't), only your audio module should be affected. I have personally done this on at least 50 cars without issues, both with and without navigation. Please ensure you prepare the flash drive correctly. Format it using FAT32. If you have already tried with Windows, use a MacBook instead. Then, copy the files into the flash drive's root folder as shown in my video. If your car unit is not working at all, it is not due to the firmware, as the update is only for the audio part of the unit. Try again and let me know.

I tried with a new flash drive and since i dont have a screen (red screen) i hoped that tge update will start when u start the car.. But tge screen is steel red screen.. I have no radio, bluetooth, rear camera.. I dont know how to exit this error red screen.. Dcu programing mode.

I tried to enter service mode with the 3 times head lights on and off with audio button pushed.. But that not working as well.. i think there is a reset button there.

Hi guys- I’ve got the same issue with the fail and red screen at the end. Doesn’t seem to affect the software after I restart the car. However I can’t stop the car from automatically starting the update rather than going through the menus and only selecting the audio to update. I’ve followed the rest of the guide , memory stick formatted to fat32 and have taken only the root folders. Any tips? Thanks

I would recommend sticking to USB, try with the files included. If not working leave your comment below. But the key is always the usb. No additional folders are needed as the car will not see them

@@CostelTarata Used a Fat32 - 32GB USB stick. All files and folder onto root. Turned on car engine and inserted USB. It automatically went into installation (I didn't even get to go to the Software Update menu ) so immediately this is different! Anyhow, I leave it to install and at the end I get red screen saying Update failed. Error Code: 001. Lucky enough I removed USB after turning car off and everything is back to normal. Any ideas?

Yeah still doesn't work for me. The system boots up as soon as I put usb in and starts to install but at the end fails with red screen error 01

Same firmware as yours, same issues,

@@George-xj7jm Instructions for Fixing Error 01 and Enabling Android Auto/CarPlay 1. Delete phaseup.dat file from the USB 2. On your radio, press the SETUP button. Select the option to delete user data. 3. Restart the radio by pressing the power button (radio power button). Connect your phone (use original cable or certified) Android Auto/CarPlay should now appear. Follow these steps to resolve the error and enable Android Auto/CarPlay. let me know if worked and what model infotainment you had before, and what is now